Holz-Punkt GmbH

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press The machine is complete and fully operational Godpfsxmr Spjx Afiobu Working range 3000 x 2000 mm

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit. Gedexmr Rxjpfx Afiobu

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electro-hydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg Godpfx Ajxizt Ujfiobu The above information is subject to change until the machine arrives at our warehouse. Availability: approx. end of October 2025 Location: Brandenburg

Condition: used, Year of construction: 2000, functionality: fully functional, Window press - capacity max/min.: 3000*2000/150*360 mm Gedpsxd Axnsfx Afiebu

Condition: used, functionality: unexamined, Maweg Euronova S Hydraulic Frame Clamp Godpfx Afew Tm Akoijbu

Condition: used, Year of construction: 1991, Used frame press pneumatic Working size 3500 x 2500 mm with center pressure beam absolute angular accuracy without correction Gjdpfxsw I Un Rj Afiebu comfortable working height due to adjustable press corners operation of the working cylinders via 2 compressed air valves all press corners are adjustable pressure adjustable from 0-15 bar Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Gbjdpfx Aow I Ui Ujfisu Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, Hydraulic frame press Schafberger & Sprödhuber with manual electrical adjustment. Technical specifications: on demand workpiece height: max. approx. 2,400 mm workpiece width: max. approx. 4,250 mm Control: Manually Gbsdpjw I Dbmjfx Afiou

Condition: used, Year of construction: 1979, functionality: fully functional, working height: 2,400 mm, working width: 3,500 mm, power: 1.5 kW (2.04 HP), 3 vertical, 2 lateral pressure cylinders Gbodpsw Hlt Nofx Afisu Condition: function tested, very good, used

Condition: excellent (used), ORMA DE-30-20 Frame Assembly Press Gbsdpsw Avcmsfx Afiou Working length: 3000 mm Working height: 1800 mm Number of upper cylinders: 3 Stroke of upper cylinders: 200 mm Number of side cylinders: 2 Stroke of side cylinders: 100 mm 3 operating modes Maximum working pressure: 100 bar Hydraulic pump motor: 1.5 kW

Condition: used, Year of construction: 2014, Capacity 300cm/180cm 1.5kw hydraulic unit Gsdpfewz Uvpex Afiobu 380V Weight 1.200kg

Condition: used, Year of construction: 2006, Capacity 300/185cm 1.5kw hydraulic unit 380V Gbedpfowy Dlkex Afisu Digital display

Condition: used, Year of construction: 2006, Capacity 2m/3m Gbsdpewyamkjfx Afieu 1.5kw 380V Cylinder stroke 150mm Very good state

Condition: good (used), functionality: fully functional, Max. pressing length approx. 2,750 mm Max. gluing width approx. 1,750 mm 10 freely movable support arms, each with a hydraulic press cylinder and one grid-adjustable counter bearing Press cylinders can be freely positioned on the support arms Support arms suspended from above, allowing for quick relocation from one side to the other Dimensions of press cylinder block: 115 x 50 mm Dimensions of counter bearing: 115 x 50 mm Max. cylinder stroke approx. 30 mm Gluing rack movable on rollers Gsdpoww Awgsfx Afisbu Installation dimensions (LxWxH): 3.1 x 1.0 x 2.25 m Press cylinders have been pressure-tested in stock.

Condition: used, Year of construction: 1992, Used machine Gedpfx Ajwwxywefiebu Year of manufacture: 1992 Features and technical specifications: Electro-hydraulic frame press control Pressing force up to 1,200 kg Two movable longitudinal pressure beams mounted with double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders can be adjusted via quick-release pressure lever with automatic locking Two electro-hydraulic control valves (with 3 switching stages) operated by hand levers This allows for precise pressing and assembly of even the most complex frame constructions Working height x working length: 2,000 x 3,000 mm Equipped with 3 vertical pressure cylinders Equipped with 2 horizontal pressure cylinders Stroke of pressure cylinders: 120 mm Three-phase motor: 1.3 kW Pressure control unit / pressing force adjustable: 0 - 60 bar Space requirement: 3,950 x 900 x 2,550 mm Weight: approx. 620 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), HESS EXPRESS Corpus Press, S/N 100954/32/1994, Year 1994 – Ref. No. 105123 Working Range: Width min. 250 – max. 2500 mm Height min. 250 – max. 1350 mm Depth max. 600 mm Installation Dimensions: Width 3580 mm x Height 2375 mm x Depth 790 mm - Central motorized height adjustment via push button - Automatic locking via trapezoidal spindle - Manual width adjustment via ball bearing slide carriage - Slide carriage with pneumatic central locking (3-position lock) - HESS hole grid system with 50 mm spacing - Continuous support bed as complete counter bearing - All pressing units with 2 pressure cylinders each - Central height adjustment of all vertical pressing units via pressure beam - Separate control of vertical and horizontal pressing units via one hand control valve each - Pressure adjustment from 4–10 bar according to diagram - Height adjustment using mm scale - Width adjustment using 50 mm scale - 4x vertical and 2x horizontal pressing units, each with 2 pressure cylinders, 1000 kp (approx. 10,000 N) pressing force per unit at 10 bar, 110 mm stroke, horizontal pressing units with quick couplers - Electrical connection: 0.55 kW, 380 Volt, 3/N, 50 Hz - Pneumatic connection: R 3/8", max. 10 bar Pressing units combined into pressing corners, left pressing corner consists of pressing unit and counter bearing, mechanically guided during height adjustment and always in position; right pressing corner consists of vertical and horizontal pressing units, can be positioned differently on both axes within the combined corner using guide rails, lower horizontal pressing unit height-adjustable; all pressing components are interchangeable. Gsdpfx Aewvqp Iofiebu Condition: See attached photos, technically in excellent condition Payment: Net cash before loading Delivery time: Short-term, by arrangement Delivery: EXW Inspection: Possible at any time by prior appointment Subject to prior sale and errors.

Condition: used, Frame press ORMA EUROPA Gjdpfxswudzbe Afiobu Line voltage 380 V - 50 Hz Control voltage, magnetic components, lamp 110 V Main protection 3 x 25 A

Condition: like new (used), Working width: 3000 mm Working height: 2500 mm Year of manufacture: 1997 Motor power: 7.5 kW Weight: 2500 kg Power supply: 400 V Clamping beam: from the top Side cylinders and gear units: adjustable from control panel Gbedswtnfzjpfx Afiju Time settings: for closing individual sections Emergency stop: pull cord switch CE marking: Yes

Condition: used, Ramarch PNR9 pneumatic press Gbodpowtcpnefx Afisu

Condition: used, used Brand: Maweg Type: RPV Machine no.: 74019 Gbsdpfxjwqg R Ro Afiou Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Working height 2480 mm Press depth 100 mm hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Gsdpfx Aewk Ntzefisbu Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: excellent (used), functionality: fully functional, CLAMPING MACHINE for furniture model ORMAMACCHINE PN 30 second hand machine technical details : manual loading max useful dimensions mm. 2200 x 600 x 1200 min useful dimensions mm. 250 x 600 x 280 motorized horizontal cross-beam manually-movable vertical crosspiece n.6 vertical cylinders n.4 horizontal cylinders cylinders stroke mm.70 volt. 380/50 installed power Kw 0,30 overall dimensions mm 3000 x 800 x 2100 h weight kg 1200 Gbjdjwk Hkkspfx Afisu

Condition: used, Used machine Used pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: length approx. 3500 mm / height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Gbjdpfewka Nmox Afiju Availability: by arrangement Location: Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 Gjdpfx Aowh T Dlsfisbu 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: used, Year of construction: 1986, Panel laminating press for sale! Manufacturer: POLZER Model: Kapfu 2 Year: 1986 Laminating table height: 735 mm Panel max. 1000 x 1000 mm Gsdewhbgbspfx Afiebu Panel thickness max: 110 mm Heating from top Floor measurements: H 1710 mm, L 4500 mm, W 1400 mm