Bender Armaturen GmbH & Co. KG

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Iiedpfjy S Hahsx Ag Isb Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: new, diameter / mm Cutting (quantity) / weight / kg Ijdpfxjy S Dp Hs Ag Isib GMN milling spindle Spindle type: HSP 150dh-24000/9 Condition: New

Condition: ready for operation (used), A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible. Iisdpfx Agoy S A N Ee Isb

Condition: ready for operation (used), Year of construction: 2001, A horizontal CNC machining center Makino is available. Travel path X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. workpiece weight: 500kg, indexing: 0.001°, rapid traverse: 84m/min, feed rate: 50m/min. Machine dimensions X/Y/Z: approx. 4650mm/1950mm/2850mm, weight: approx. 8600kg, control system: Fanuc System 16iM/Makino Professional 3. Documentation available. An on-site inspection is possible. Iijdoy S A Nrjpfx Ag Isb

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 182.012, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is an untested machine. Due to the partially dismantled enclosure, the machine is offered exclusively as a source of spare parts. Iisdpfx Asy Sgb Esg Ieb Configuration Siemens CNC control Automatic tool changer Chip conveyor Coolant lubrication system

Condition: ready for operation (used), Year of construction: 2007, A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible. Iiedpsy R Dt Aefx Ag Ijb

Condition: ready for operation (used), Year of construction: 1998, A Hedelius CNC traveling column machining center with pendulum operation is available. Travel path X/Y/Z: 2500mm/630mm/750mm, pendulum operation: 2x 950mm/630mm, tool positions: 30, tool holder: SK50, speed: 5000rpm, table dimensions X/Y: 3250mm/650mm, max. table load: 3000kg. Machine dimensions X/Y/Z: approx. 4500mm/2700mm/2700mm, weight: approx. 9000kg, control system: Heidenhain TNC 426, control hours: 42944h, machine hours: 23037h, operating hours: 13740h. Documentation available. An on-site inspection is possible. Iodjy Rtgfjpfx Ag Isib

Condition: like new (used), Year of construction: 2020, Front lathe with multi-tool turret, Siemens control (4 units available) Isdpfx Agey Ivffj Ioib

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Ijdey Igbqepfx Ag Ioib

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Isdpfxey H I H So Ag Ijib

Condition: ready for operation (used), Year of construction: 1996, Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible. Ijdpfoy H I Hfox Ag Isib

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Iisdpfx Aoy H I Eueg Iob

Condition: ready for operation (used), Year of construction: 1997, Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible. Iodpsy E S Ecjfx Ag Ioib

Condition: ready for operation (used), Year of construction: 2007, A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production line has all necessary peripheral equipment such as filter systems, chip conveyors and coolant supply systems from the manufacturers Knoll and Hyfra. Documentation available. An on-site inspection is possible. Iiodpfx Agsy Ey Tuj Ijb

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Iiodpfx Aoy Er Ukog Isb Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: ready for operation (used), Year of construction: 1987, Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible. Iedpfxoy D Tqds Ag Ijib

Condition: ready for operation (used), Year of construction: 1991, Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible. Iijdpfxjy D Tqkj Ag Isb

Condition: ready for operation (used), Year of construction: 1996, Connected load: 16kVA, control: FANUC Series 0-M, with carousel tool magazine, coolant system with external chiller HABOR Unit, spindle cooling, enclosed working area (full enclosure), handwheel (MPG) vorhanden, manual clamping devices on table and transformer separately in the control cabinet. On-site inspection is possible. Iodpfxsy D True Ag Isib

Condition: ready for operation (used), Year of construction: 1983, An old Stama machining center is available. Tool positions: 10, travel path X/Y/Z: 500mm/380mm/400mm, table dimensions X/Y: 700mm/380mm, tool holder: SK30, speed: 7500rpm, drilling capacity in steel: 30mm, machine dimensions X/Y/Z: approx. 2350mm/2550mm/2750mm, weight: approx. 2500kg, control: Fanuc 6MB. An on-site inspection is possible. Isdpfxoy D Tr Us Ag Ijib

Condition: ready for operation (used), Year of construction: 2005, A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible. Iijdpfey A Sl Rjx Ag Iob

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible. Isdpfx Aey Ant Rsg Isib

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min Ijdpeyzxfnjfx Ag Ijib - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: ready for operation (used), Year of construction: 1998, Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment. Iisdsyzh A Njpfx Ag Ieb

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm Iijdpfxjyxy E Rj Ag Isb z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Isdoyxn Nkopfx Ag Isib