HACO-Mubea Systeme GmbH

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Lhedpszgck Asfx Aiioh - Roll shelf

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Lsdjzdzkcjpfx Aiijhh If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm Lhsdpszdnx Hefx Aiioh cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Lhedpfozdgnzjx Aiijh Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Transport Width 2,180 mm

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible Lhedpjzcqy Sofx Aiioh - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5,7 ", working width: 4,000 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear The HGM B16-4000 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, machine manufacturing, and high-capacity sheet metal processing applications, offering a 16 mm sheet metal cutting capacity and a 4000 mm cutting length. It provides precise and efficient cutting thanks to the ELGO P40T touch-screen CNC control unit, automatic blade gap adjustment system, motorized back gauge system, and Rexroth hydraulic system. Standard Features Throat Depth: 250 mm Cutting Length: 4000 mm Distance Between Columns: 4580 mm Cutting Capacity: 16 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic calculation of blade gap, cutting angle, and pressure adjustment based on material Automatic cutting program Back sheet support system with RTS function Automatic Blade Gap Adjustment System Automatic calculation and adjustment based on the thickness of the sheet to be cut Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm Motorized NC Controlled Back Gauge on X-axis X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Lsdpjzbqzyefx Aiiehh Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Protection System 1000 mm retractable front protection guard Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) Premium Front and Rear Guarding Rexroth Hydraulic System Energy-Saving Standby Mode Optional Features Pneumatic Sheet Support System (Type 2 – 4-Position RTS Function) 4-position pneumatic support system Stable support for large-sized sheets Reduces sheet bending and deformation RTS (Return To Sender) function Increases operator comfort and safety Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Retractable Front Protection System Technical Specifications Cutting Capacity (450 N/mm²): 16 mm Cutting Capacity (700 N/mm²): 10 mm Cutting Length: 4000 mm Cutting Angle: 0.5° – 3.0° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 6 / 12 hpm Distance Between Columns: 4580 mm Table Height: 1010 mm Table Width: 700 mm Throat Depth: 250 mm Back Gauge Movement (X-axis): 1000 mm Machine Length: 5980 mm Machine Width: 3750 mm Machine Height: 2825 mm Oil Tank Capacity: 390 L Motor Power: 30 kW Machine Weight: 21.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: good (used), functionality: fully functional, Year of construction: 2018, Sheet metal width: 3100 mm Sheet metal thickness: 6 mm Total power: 12.5 kW Machine weight, approx.: 5500 kg Space requirement, approx.: 3860 x 2560 x 1560 mm Lhsdpfezbbbwjx Aiieh Equipment: - Manual cut gap adjustment - Digital back gauge, 1000 mm - Angle stop - 2 support arms - Foot switch - Cutting line illumination - Protective grid behind the machine

Condition: new, functionality: fully functional, Sheet metal width: 3060 mm Lhsdpfx Ajzbbbksiish Sheet metal thickness: 6 mm Stroke rate: 20 strokes/min Stroke: 750 mm Motor power: 11 kW Oil capacity: 160 l Machine weight (approx.): 5,500 kg Dimensions: 3860 x 2560 x 1560 mm

Condition: good (used), Year of construction: 1991, Used plate shear from Safan Type VS 430 6 Capacity 4300 x 6 mm Lhedpfxoza T Efj Aiish Electrically adjustable back gauge Adjustable shearing angle and blade clearance Pneumatic hold-down table at the rear

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm Lhodpfx Aezaip Hjiioh max. cutting width: 3080 mm machine weight: 5600 kg Very good, ready-to-use condition.

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Colour: Yellow Weight: 21.000 kg Lsdpfx Aey Uwp Soiiohh - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 - Backgauge depth [mm]: 1000 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 21000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, The machine is in good technical condition; inspection possible by arrangement. Weight: 11,560 kg Cutting length: max. 4,050 mm Cutting thickness: max. 6.3 mm Lhodpfx Asy Ufa Ejiioh

Condition: used, Year of construction: 2008, total length: 4,900 mm, total width: 2,400 mm, total height: 1,750 mm, Colour: White Weight: 9.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 14418 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4060 - Cutting speed [mm/min]: 12 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Safety light curtain - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Fixed table - Options: Digital readout - Transport dimensions: 4900mm x 2400mm x 1750mm (l x w x h) - Transport weight [kg]: 9500kg - Transport packages [pcs.]: 1 Ledpfoy Tnzvex Aiishh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 6,400 mm, Colour: White Weight: 17.500 kg - Documentation available: Yes - CE certificate present: No - Serial number: 13707 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport weight [kg]: 17500kg Lsdpoy Thpgofx Aiishh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Lhodpfx Ajy Sbu Hoiioh Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: good (used), functionality: fully functional, Year of construction: 2020, Hydraulic Guillotine Shear Make: Fasti Type: 530 – 3000 x 6mm Year: 2020 Technical Specifications Manufacturer Schröder Model 530 - 30/6 Year of Manufacture 2020 Sheet Width 3040 mm Sheet Thickness 6.00 mm (400 N/mm²) Blade Gap Adjustment 0.5 – 1.8 mm Strokes per Minute 24-61 spm Drive Power 12.0 kW Space Requirement (LxWxH) Approx. 4.00 x 3.00 x 1.96 m Weight Approx. 6.5 t Lhsdpfx Aijy R Dcwsioh Equipment/Features - 12” touchscreen controller PSC 150 on swiveling panel - Energy-efficient drive for frequency-controlled motor and pump - Automatic blade gap adjustment - Adjustable hold-down pressure selectable via the control system - Motorized backgauge 10–1000 mm with ball screw spindles - Pneumatic sheet holding device - LED cutting edge illumination - Programmable start and end position for the blade beam - Angle stop mounted on the left incl. electronic length measurement system, fine adjustment, and lateral flip stop with linear guide, 1000 mm - 2 backgauge arms with ball rollers, adjustable on linear guides - Table support made of stainless steel sheets with ball rollers - Rear area secured with light barrier - Scrap and small parts chute to the front incl. "Return to Sender" function - Movable table extension mounted on guide rail - Finger guard, can be raised approx. 1500 mm, incl. electrical safeguarding All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, controller manufacturer: Siemens, ORBIBEND, the mobile orbital cutting system, surpasses standard planetary cutters and marks a new step in the evolution of tube bending machines. (Simat Patent). A MOBILE ORBITAL CUTTING unit capable of grooving the tube (Simat Patent): Ljdpfx Aoy Rky Aoiishh End-of-curve cutting: tube cutting at the curve's end, eliminating the need for subsequent trimmings on short ends. On-the-fly pre-scoring: the groove is made in the “shadow” during the bending phase, saving cycle time. Rotary draw bending Stretch bending Multi-radius bending in process Right- and left-hand bending in process ORBIBEND can be paired with a tube former from the MACH series; this allows you not only to bend and cut but also to shape, reduce, flange, bead, end-form, and roll tube ends. Additionally, the machines can be interfaced with a robot for operations on both ends of the tube.

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 22106 - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Ljdey Nk S Aspfx Aiiehh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 4,100 mm, total width: 1,900 mm, total height: 1,750 mm, Colour: Blue Ledpey Nk R Sofx Aiiehh Weight: 6.500 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 10.769/94 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 16.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3150 - Throat depth [mm]: 160 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed with lift-up guard - Angle adjustment: Motorized - Options: Digital readout - Transport dimensions: 4100mm x 1900mm x 1750mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Ledoy H D I Eepfx Aiishh Return to sender feature Scrap container Entry safety barrier

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 23708, power: 7.5 kW (10.20 HP), HACO TS 3006 Atlantic - Working length: 3050 mm - Mild steel capacity: 6 mm (400N/mm2) - Min. cutting angle: 0.5° - Max. cutting angle: 3.0° - Number of hold-downs: 18 - Strokes per minute at smallest angle: 14 Lhjdpfx Aioy Dpzfjijh - Strokes per minute at largest angle: 8 - Working height: 770 mm - Motor power: 7.5 kW - Total length: 3800 mm - Total height: 1750 mm - Total width without CE guard: 1650 mm - Total width with CE guard: 2700 mm - Control: SP9 Robosoft - Weight approx. 4500 kg

Condition: used, Year of construction: 1984, total length: 3,700 mm, total width: 2,000 mm, total height: 1,650 mm, Colour: Grey Weight: 5.000 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 8406029 - Drive system: Conventional - Drive type: Hydraulic Lhedpjy Dcm Uofx Aiijh - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3700mm x 2000mm x 1650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_12, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Cutting length - 3,100.0 mm Sheet thickness 400 N/mm² - 6.0 mm Sheet thickness 700 N/mm² - 4.0 mm Lhedpey A Ntxefx Aiieh Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: excellent (used), Year of construction: 1999, actuation type: hydraulic, working width: 3,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, We offer this very good AMADA PROMECAM GS 630 hydraulic guillotine shear, year of construction 1999. If you have any questions or need more information, feel free to send us a message or give us a call. CUTTING LENGTH: 3050 MAX THICKNESS MS: 6mm MAX THICKNESS SS: 4mm Lhedpfxoy Ax N No Aiijh BACK GUAGE LENGTH: 1000mm BACK GUAGE: PROGRAMMABLE POWER SPEED 100M/PER/MIN MOTOR POWER: 5.5KW

Condition: excellent (used), Year of construction: 1990, Promecam GH840Z Shear, 4100 mm blade, cutting capacity 8 mm / 12 mm. In working condition and well-maintained, with sheet metal support. Ljdpfx Aijyy Dg Ueiehh