Maschinenfabrik Rudolf Schöberl Ges.m.b.H. & Co.KG

Condition: excellent (used), Max working width 9000 mm Max working height 1100 mm 6 upper pressing sections, each 1520 mm Lhodpjxnwpiofx Ab Ujn 18 front clamps Overall width 13000 mm Overall height 2200 mm

Condition: used, Year of construction: 2014, functionality: fully functional, Lamella press 13 m x 1.6 m x 240 with 2 decks Lhjdpfx Abjxmvvlj Usn

Condition: good (used), Hydraulic gluing press for solid wood, e.g. window and door scantlings, solid wood panels, etc. Working length: 5 m. Working height: 1.53 m. Working depth: 0.10 m. Hydraulic unit: 2.2 kW. 10 hydraulic press cylinders. 5 pneumatic hold-down clamps. Max. pressing pressure: 150 kg/cm². Hydraulic unit: 2.2 kW. Ljdsxiu Dgspfx Ab Uohn

Condition: ready for operation (used), working range: 5,000 mm, Solid wood gluing press Manufacturer: Emmes Working length: 5000 mm Working height: 1530 mm 10 hydraulic vertical press cylinders 5 pneumatic front hold-downs Lhjdpfxsxguflo Ab Uen Max. pressing force: 150 kg/cm² Hydraulic pump: 2.2 kW Oil pressure: 159 kg/cm Air pressure: 8 kg/cm²

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Clamping length 2500 mm Clamping height 2200 mm Lhjdpfx Aexdtrrjb Uon 8 pcs. roller supports with clamping element and counter bearing 4 pcs. pressure brackets for suspension with spindle locking Mobile version Equipped on both sides 1 pc. heating rail 60x60x2500 mm

Condition: new, - NEW - Standard configuration: - 3 pressing units, 90-degree stop. - 1 side pressure device with 2 trapezoidal spindles. Description: A multifunctional gluing and frame press for precise and angle-accurate assembly, ideal for gluing drawers, carcasses, panels, and much more. The pressure units use trapezoidal spindles with pressure bearings made from precision tubes, delivering 2 tons of pressure and a 120 mm stroke. Pressing units mounted on ball bearing guides, galvanized, with a 100 mm precision hole grid. All profiles are made from thick-walled rectangular tubes. Clamping dimensions: (HxW) 1170 x 2110 mm Ledpexcyxijfx Ab Ujhn Including special accessories: 1 pressing unit with trapezoidal spindles for LEIMO PRO 2 hold-down clamps for LEIMO PRO

Condition: used, Year of construction: 1996, functionality: fully functional, 1 unit Altec Laminating Press MVP 6/16 A for pneumatic gluing of solid wood workpieces across 4 positions. Machine numbers: 96 03/269 or 96 03/270, year of manufacture 1996 – currently, two units are coupled together. Robust four-level laminating press Altec MVP 6/16 A made from high-strength steel. Lsdpfx Ajw Rq Tnjb Ujhn Machine for pneumatic gluing of solid wood workpieces on a total of 4 positions. Special features/description: 1 unit MVP 6/16 A with a pressing length of 2,500 mm. One level has been configured for larger material thicknesses. Price for 1 unit MVP 6/16 A: €4,650 net plus VAT Price for both MVP 6/16 A, coupled together as shown in the photos: €8,500 net plus VAT The press was used until the end of production but requires some minor maintenance work. According to the manufacturer, spare parts are available. Pickup in 41334 Nettetal, forklift available. Description of a single Altec multi-level laminating press according to the manufacturer: Type: MVP 6/16-A 4 levels Pneumatic Max. pressing length: approx. 2,500 mm Min. pressing length: approx. 400 mm Max. insert depth: approx. 1,050 mm Max. insert height: approx. 130 mm 4 pressure beams per level, approx. 850 mm each 4 hold-down devices per level Pressure beam stroke: approx. 50 mm Pressing force per pressure beam (at 10 bar): approx. 2,600 kg Pressing force for gluing is provided by an air-filled fabric hose mounted at the rear of the pressing area. The press is not mounted on casters. Dimensions: approx. L: 2,500 mm x W: 1,500 mm x H: 1,800 mm Weight: approx. 700 kg

Condition: used, Year of construction: 1996, functionality: fully functional, 2 units of Altec Laminating Presses MVP 6/16 A for pneumatic lamination of solid wood workpieces at 8 pressing positions. Machine numbers: 96 03/269 and 96 03/270, manufactured in 1996 – coupled. Robust four-level laminating press Altec MVP 6/16 A, constructed from high-strength steel. 2 machines for pneumatic lamination of solid wood workpieces, offering a total of 8 pressing positions. Special features/description: 2 MVP 6/16 A units are positioned side by side and coupled, doubling the pressing length to 5000 mm. One level has been adapted for greater material thicknesses. The two MVP 6/16 A presses can be separated and operated individually or installed separately. Price per MVP 6/16 A unit: €4,650 net, plus VAT Price for both MVP 6/16 A units, coupled as shown in the photos: €8,500 net, plus VAT The press was used up until the end of production, but requires some minor maintenance. According to the manufacturer, spare parts are available. Collection in 41334 Nettetal, forklift on site. Specification for a single-level Altec laminating press according to the manufacturer: Model: MVP 6/16-A 4 levels Pneumatic Max. pressing length approx. 2,500 mm Min. pressing length approx. 400 mm Lhjdpfew Nyqtox Ab Ujn Maximum insertion depth approx. 1,050 mm Maximum insertion height approx. 130 mm Per level: 4 pressure beams (approx. 850 mm each) Per level: 4 hold-down devices Pressure beam stroke: approx. 50 mm Pressing force per beam (at 10 bar): approx. 2,600 kg Pressing pressure applied through an air-filled fabric hose mounted at the rear of the pressing area. Press does not have wheels. Dimensions approx. L: 2,500 mm x W: 1,500 mm x H: 1,800 mm Weight: approx. 700 kg

Condition: excellent (used), Technical data: Max glued element size: 1450 x 6500 mm 12 vertical clamps Lhedpew Dy Ensfx Ab Usn 6 horizontal clamps Hydraulic clamps Power supply: 400 V Motor power: 2.2 kW Overall dimensions: Length: 7000 mm Width: 1500 mm Height: 2400 mm

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test. Ledpfx Abow Anc Es Uohn

Condition: excellent (used), Year of construction: 2004, working dimensions 2800x1100mm 3 working areas Lhodpfx Abjw Ad Tyj Uen manual rotation 6 pneumatic pistons/working area 3 frontal keepers / area year 2004

Condition: used, functionality: fully functional, The machine is equipped with 6 cylinders and 4 flush holders. Additionally, there is a pressure beam with 5 pneumatic cylinders mounted at the rear. Lhsdpfx Aowz Nbgob Uon

Condition: excellent (used), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000mm Gluing height: 1200mm Maximum gluing width: 200mm Ljdpswzg Scsfx Ab Uohn Number of vertical hydraulic presses: 12 Number of frontal presses: 6 Cylinder diameter: 70mm Vertical cylinder pressure: 7300kg CE certificate DTR documentation

Condition: excellent (used), Assembly press ITALPRESSE SR 3/100 Working length: 3300 mm Working height: 1800 mm Number of vertical cylinders: 4 Stroke of vertical cylinder: 200 mm Number of horizontal cylinders: 2 Stroke of horizontal cylinder: ~110 mm Machine control via control panel Manual and automatic operating modes Ledpfx Abewyails Ushn

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 240850, overall weight: 1,600 kg, working length: 7,000 mm, clamping range: 1,350 mm, It was in working condition until it was replaced, hasn't been used for years. Has been stored in dry conditions is a shed, outside temperature, there has some rust appeared and needs maintenance. If you have any questions don't hesitate to ask! Lhsdpfewxvc Sjx Ab Uen Workpiece max length 7000mm, max height 1350mm.

Condition: ready for operation (used), working length: 1,100 mm, working width: 2,100 mm, product height (max.): 50 mm, Gluing press Make: Polzer Type: EVA Gluing star with 6 gluing levels, each with 2 special heating plates Gluing size 2100 mm x 1100 mm With glue application station With 2 lifting devices for loading and unloading the plates With roller conveyor Workpiece thickness max. approx. 50 mm For removal, the plate is lifted pneumatically Per level: 7 pneumatic pressure cylinders, 100 mm diameter, 100 mm stroke, pressing force 740 kg per cylinder, moving pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each heating plate 220/380V, 3 kW, thermostat 0 – 120°C Operating pressure 8 – 10 bar Ljdpfx Abowr Tyzj Ujhn Bonding temperature adjustable, ideally 50-65° Performance approx. 50 m²/h With safety guard External dimensions approx. 4000 mm x 4000 mm x 3600 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Pneumatska Presa za sirinski lepljenje.Maksimalne dimenzije lepljenja 5000x1300 mm.Presa se rotira i ima dve etaze. Na prodaju su dve identicne prese. Stanje odlicno. Ljdswptqnepfx Ab Uehn

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - platen diam. mm. 2300x1300 - 6 cylinders diam. 180 mm. Lodpfxownnmzj Ab Ushn

Condition: like new (used), • condition - used, after inspection • manufacturer - ORMA Ledpfx Abswlwr Io Uehn • model - C4 • shelves measuring 250 x 120 cm • max. clearance between shelves 490 mm • shelves straight, clean, without dents/damage • 4 pistons with a diameter of 55 mm • max. pressure 150 bar • pump motor 1.1 kW • gluing time stopwatch • shelves heated with liquid • possibility of switching on and checking the device on site

Condition: excellent (used), Catalog number: 7648 TECHNICAL DATA number of loading fields 2 to 4 length of strips 4x1500mm piston cylinders: 6pcs (on each field) 3 upper 3 side resistance strips 12pcs max material width 150mm max height of glued elements 1100mm hydraulic pump driven by a 3kW engine upper hydraulic cylinders side hydraulic cylinders dimensions length/width/height 8600/1100/2320mm weight about 4800kg ADVANTAGES – very good condition – original DTR documentation – used press – unpainted Lhsdpfx Aswkhaajb Uen – intended for professional use Net price: PLN 72900 Net price: EUR 17150 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm Ledpfx Aswkf Stob Uehn •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames •Assembling furniture bodies •Assembling wooden panels and other construction joinery elements

Condition: used, Year of construction: 1980, Used machine Condition: Function tested Equipment and technical data: Lsdpswkbd Sefx Ab Uehn Vertical cylinders: 4 pcs Vertical cylinder stroke: 80 mm Vertical cylinder adjustment: manual Vertical cylinder clamping: perforated grid Horizontal cylinders: 2 pcs Horizontal cylinder stroke: 80 mm Cylinder type: pneumatic Pressure beam adjustment: manual Horizontal pressure beam clamping: perforated grid Pressing process control: push button Dimensions (L x W x H): 3200 x 750 x 2350 mm Location: Röllbach Availability: Short-term

Condition: excellent (used), Year of construction: 2022, Plate length - 2100 mm Plate width 1100 mm Press opening - 250 mm Pressure force - 90 t Number of cylinders - 6 Max working temperature - 120 °C Cylinder diameter70 mm Heating plates Thermal oil Press with pistons at the bottom Lhodpfxjwgl A Ro Ab Uen Side pressure cylinder - 4 Total connection power - 21 kW Excellent technical condition

Condition: used, Max. Length: 6000 mm Lhjdowf Hivepfx Ab Usn Width: 1300 mm complete with gluing machine

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, feed length X-axis: 2,500 mm, We are selling 3 ORMA macchine gluing presses. Working width: 2500 mm Working depth: 1300 mm Price for all 3: - €6000 (€2000/press) Ledpjwf Dx Uofx Ab Ushn Viewing in person is possible. We also have other woodworking machinery for sale. For any information, please contact us—we are at your disposal!