AM Marketplace GmbH

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm Crodpfxjz Ilt Hs Ailoh MACHINE DETAILS Operating voltage: 240 V Frequency: 50/60 Hz Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1

Condition: used, functionality: limited functionality, Year of construction: 2019, HP JetFusion 4200 3D printer Csdpoz Hqtiofx Ailjrh HP JetFusion 4200 3D printer using polyamide PA12, used very little, put into operation in 2019, including processing station and build unit. Price for 1 printer, 1 build unit, and 1 processing station.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm Csdsz Hdflopfx Ailorh • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,056 h, total length: 1,640 mm, total height: 1,920 mm, total width: 1,000 mm, overall weight: 700 kg, laser power: 30 W, Equipment: compressor, The Prodways ProMaker P1000 is a professional selective laser sintering (SLS) system designed for the production of durable, functional parts and serial production. This 2019 model is equipped with a unique 30 W CO₂ laser and features a spacious build chamber measuring 30 x 30 x 36 cm (32 L). Cedpfsz E R Iqox Ailjrh It is compatible with a wide range of materials, including nylon 12, nylon 11, TPU, and PP, and its open material parameters allow you to precisely adjust existing settings or qualify new powders based on your specific applications. It shows some minor cosmetic wear but is in perfect working order. Maintenance was performed in September 2026; the 30 W laser has 1,056 operating hours. The sale includes everything needed to start printing: - the printer with its control computer, - a Claind Nitro 35 nitrogen generator, - a Cormak Luft 700 air compressor (new), - a stainless steel powder mixer (new). The original packaging is available. Live demonstrations and test prints can be arranged.

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment • Material starter kit PA11 ESD BASF Machine Benefits Cedpfx Aez E Hhaeiljrh Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Crsdpez Erdaefx Ailjh Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Crodpfx Aez Ep Dkjiljh

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, total length: 1,060 mm, total height: 2,066 mm, overall weight: 140 kg, space requirement width: 906 mm, Brand new printer, functions perfectly. We are selling it because we have a duplicate. Some optional features: Griffin Ultra Magnetic build plate, full coverage Enclosure Castors Crodpfx Aisz Eccteljh Z-axis HIWIN rails (included) DEX dual print head IDEX calibration tool Tilting screen & E-stop panel

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Credpfxoz Duhro Aileh Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output. Codpez Dugnefx Ailerh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output. Crjdpfxoz Dudms Ailsh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Codpsz Dudgjfx Ailsrh Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: ready for operation (used), Year of construction: 2017, total height: 2,800 mm, total width: 2,200 mm, overall weight: 2,500 kg, travel distance X-axis: 1,505 mm, travel distance Y-axis: 1,179 mm, travel distance Z-axis: 1,667 mm, product length (max.): 3,100 mm, number of axes: 3, This 3-axis MASSIVIT 1800 was manufactured in 2017. It features a generous print volume of 1500 x 1170 x 1800 mm and a maximum linear speed of 300 mm/s. The machine is equipped with an inline cleaning system and automatic printhead cleaning for enhanced productivity. If you are looking to get high-quality 3D printing capabilities, consider the MASSIVIT 1800 plastic 3D printer we have for sale. Contact us for further details. • Printing Technology: GDP (Gel Dispensing Printing) • Number of Printheads: 1 • Print Volume: 1500 x 1170 x 1800 mm • Small Z Travel: 174.2 mm • Maximum Linear Speed: 300 mm/s • Typical Printing Speed: 100 mm/s • Productivity: up to 350 mm/h • Layer Thickness: 0.8 / 1.0 / 1.3 mm • Printing Materials: Dimengel 90 / Dimengel 100 • Material System: Single Material • Inline Cleaning System: Yes • Automatic Printhead Cleaning: Yes • Massivit Printer Software: v4.0.2 • Massivit Smart Software: v4.0.2 • Maximum Object Weight: 150 kg • Crated Dimensions: 3500 x 2300 x 2600 mm • Crated Weight: approx. 3000 kg • Power Supply: 380–400 V • Power Consumption: approx. 10 kW • Compressed Air: 6–8 bar • CE Marking: Yes Crodpfxjz Dhbro Ailsh Additional equipment • Compressor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Csdpfjz Dgfvsx Ailsrh Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 0011, Year of construction: 2013, total length: 2,000 mm, total height: 2,130 mm, total width: 1,820 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, table width: 400 mm, table length: 500 mm, space requirement length: 7,500 mm, space requirement height: 2,700 mm, space requirement width: 6,500 mm, Voxeljet VX500 industrial 3D printing system, manufactured in 2013, serial number 0011. Build volume: 500 × 400 × 300 mm. Overall machine dimensions: approximately 2000 × 1820 × 2130 mm. Weight: approximately 1200 kg. Electrical supply: 400 V, 50 Hz, three-phase, nominal current 7.8 A, fuse 16 A. The main printhead assembly is missing. The machine has not been tested and is offered as-is for repair, refurbishment or spare parts. The package includes Voxeljet VRS500, VCL1400, auxiliary extraction and filtration equipment, binder/chemical storage equipment, oven, wax bath and other accessories. Exact inventory to be confirmed. Crsdpoz Davbsfx Aileh Located in a Turkish Free Zone. Export and customs formalities to be arranged by the buyer.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Codpfsz A Sycsx Ailsrh Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Crodpfjz Ahq Tex Aileh Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, overall weight: 550 kg, input voltage: 230 V, warranty duration: 12 months, input current: 16 A, electrical fuse: 16 A, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, power: 3.2 kW (4.35 HP), BigRep STUDIO G2 – Large-format industrial 3D printer | serviced | PEI | AI monitoring | 12 months support For sale is a BigRep STUDIO G2 industrial large-format FDM 3D printer from our machine inventory. The machine will not be sold in an "as is" condition without inspection. Before handover, the printer will be fully technically inspected, serviced, and prepared for production by us. Special advantage: Technical support is provided by ThinkBig3D, which has many years of BigRep service experience. I myself worked for several years as a service technician directly at the manufacturer BigRep and continue to provide professional support for BigRep systems. Included in the purchase price: BigRep STUDIO G2 Complete technical inspection and maintenance before handover PEI switch plate including magnetic base PrintShield AI-based print monitoring Machine commissioning at the buyer's location Operator and user training 12 months of technical service & support from ThinkBig3D Support for setup and production start-up Technical data Manufacturer: BigRep GmbH Model: STUDIO G2 Year of manufacture: 2019 Manufacturing process: FFF/FDM Build volume: 1,000 × 500 × 500 mm Voltage supply: 230 V Fuse rating: 16 A Power consumption: approx. 3.2 kW Machine weight: approx. 550 kg The STUDIO G2 is particularly suitable for the production of large-format prototypes, jigs, models, molds, functional parts and small series. Typical areas of application include automotive, machine and plant engineering, model and mold making, architecture, research & development, marine/boatbuilding, as well as art and design. PEI Switchplate Crodpfx Aiozz In Aoloh The machine will be equipped with a PEI switchplate. This system facilitates the removal of components and provides a reliable printing surface for professional use. PrintShield – AI-based print monitoring In addition, the machine will be equipped with our self-developed PrintShield system. Using cameras and AI-based monitoring, ongoing printing processes can be monitored, and typical printing errors or anomalies can be detected. This provides additional process reliability, especially for large-format components and multi-day printing jobs. Commissioning & training included As part of the handover, training for the operating personnel will also be provided. Topics covered include machine operation, print preparation, material handling, print bed/PEI switchplate, basic process parameters, maintenance and care, troubleshooting, and the use of PrintShield. 12 months service & support The purchase price includes 12 months of technical service and support from ThinkBig3D. This ensures that the buyer has a contact person with extensive BigRep experience even after the machine handover. The machine can be inspected and demonstrated in Berlin by appointment. A test print is also possible after prior consultation. Price: €27,900 net plus statutory VAT – negotiable Sale by ThinkBig3D. Transport or delivery can be arranged upon request. Note regarding the images: Some of the product images used have been digitally retouched for better representation and may contain AI-generated content. The machine actually offered is shown in the original images. The technical specifications and described equipment features refer to the machine that is actually for sale.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 8000, Year of construction: 2020, total length: 1,158 mm, total height: 1,788 mm, total width: 882 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 296 mm, feed length Y-axis: 296 mm, feed length Z-axis: 296 mm, wire diameter (max.): 1.75 mm, Equipment: CE marking, emergency stop, Used 3ntr Spectral 30 3D printer, from a demo center Availability: immediate Crsdpfx Aszzw Ryjiljh Origin: showroom, used only for demo purposes. The SPECTRAL 30 is a high-performance FDM printing system for ultra-polymers such as PEEK, PAEK, Ultem 9085, Ultem 1010, PPS, and other standard filaments including ABS, ASA, and NYLON. 4 extruders up to 500°C, 0.4mm nozzles for 1.75mm diameter filaments, with the option to perform annealing in the printing chamber. In impeccable condition, coming from a showroom and used only for demonstration purposes. The machine is perfect, ready for operation, and available for any testing or inspection. It is supplied with its wooden crate. Technical specifications Technology: FDM Heated chamber up to 250°C + 4 integrated ventilation units (desiccators) Printing area: 296 x 296 x 296 mm Connections: Ethernet Calibration system: automatic Weight: approximately 400 kg Power supply: 380 V

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us. Crjdpfszzk Ufex Ailsh

Condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 2117506, Year of construction: 2021, input voltage: 230 V, input frequency: 60 Hz, Device data: Model: VSHAPER 500 PRO (VS-50-PRO) Version: G2.0 Year of manufacture: 2021 Serial number: 2117506 Origin: Made in EU Connection voltage: 230 V ~ 50/60 Hz Condition: Defective - cause of fault unknown Crjdpfezzcg Hex Ailjh Technical highlights: Dual extrusion with 4 print heads (LT + HT) for a wide range of materials High-temperature capable up to 420 °C - suitable for technical plastics Wide print head compatibility: V-JET, V-PREC-SINGLE, V-PREC-S-MED series Original purchase value (2021): approx. €41,041.00 net Other: The device was acquired and put into operation as a demonstration machine in September 2021. The originally included 1-year manufacturer's warranty (V-SERVICE SILVER) has expired.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Crjdpfxozy Rwqe Aileh Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 5,000 h, total length: 1,750 mm, total height: 1,960 mm, total width: 1,240 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 208 V, input current: 30 A, feed length X-axis: 1,000 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, space requirement length: 1,750 mm, space requirement height: 1,960 mm, space requirement width: 1,240 mm, STRATASYS F770 – A GREAT OPPORTUNITY: Large-format industrial 3D printer, including a 21 kW three-phase Riello UPS. Eligible for invoicing and 100% tax deduction at the end of the year! Selling for less than 1/3 of the list price due to company asset renewal. [1] WHY IS IT PERFECT FOR YOUR COMPANY? • Single-piece parts over 1 meter: Ideal for dashboards, ducts, housings, and large custom components without joints. [1, 2] • Ultra-resistant materials (ASA/ABS): Printing with ASA, an exceptional material resistant to UV rays, weathering, and mechanical wear, perfect for outdoor and industrial applications. [1, 2] • Jigs and workshop tools: Immediate in-house production of positioning jigs, mounting brackets, and drilling templates. [1, 2] • SR30 soluble support: Enables the creation of hollow geometries and complex shapes (e.g., conduits or cable ducts) without design constraints. [1, 2] TECHNICAL SPECIFICATIONS IN BRIEF: • Condition: 2023 | Only 5000 operating hours (as good as new). • Printing volume: 1000 x 610 x 610 mm. • Machine dimensions: 175 x 124 x 196 cm (L x W x H). • Weight: 658 kg on wheels. • Materials: ABS / ASA | SR30 soluble support. Crjdpszyf Spefx Ailsh • Layer resolution: 0.33 mm | 0.25 mm | 0.178 mm. • Software included: GrabCAD Print / Insight (native CAD file management). • Details: Three-phase power supply | CE certification. [1, 2, 3, 4, 5] If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, operating hours: 24,500 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP. Last print was run on 17/07/26. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Credpfx Aozx U Ikoiloh Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract has EXPIRED. The buyer will need to arrange service and recertification on relocation. That cost is not included in our price.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Crsdpfx Aezx S Easileh Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.