Hauck Holzbau GmbH

Condition: used, Year of construction: 2011, operating hours: 3,440 h, functionality: fully functional, machine/vehicle number: 91, We are offering this very lightly used Krüsi Krüsimatic G1, with only 3,440 operating hours, year of manufacture 2011. Ppedjyfwbnjpfx Aalol Manufacturer: Krüsi Maschinenbau AG OFFER - KRÜSIMATIC G1 5-Axis System from Krüsi Wood passage: 420x200 mm 5-axis saw unit 5-axis horizontal milling unit 5-axis vertical milling unit Drilling unit Chain slotting unit 8 m discharge roller table 8 m discharge roller table (second unit) Control system with cooling unit Compressed air tank Complete tooling included Operating manual 1 used joinery line by KRÜSI, model Kruesimatic G1 Year of manufacture: 2011 Can be operated with all major joinery software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail cutter Processing direction: right to left 6-sided machining without the need to rotate the timber! Weight: 5.5 t BTL-controlled for office interface or, of course, manual input at the machine. Feed speed is frequency-controlled and can be optimized for many cross cuts to increase cutting performance. Platform height without floor recess: 920 mm Offcuts and chips are collected in a mobile box The system only needs to be connected to the main control cabinet via plug-in connectors Max. timber cross-section: 200mm x 420mm The system is assembled and ready for demonstration AVAILABLE IMMEDIATELY The entire system fits on a MEGA trailer Location: 8842 Unteriberg, Switzerland, and can be inspected under power. Dismantling / Transport / Installation On behalf of: Auf der Maur GmbH Machinery transport Sale from site at Waagtalstrasse 42, 8842 Unteriberg, as inspected, without any warranty or guarantee. Payment must be made in full immediately upon receipt of invoice, without deduction. Collection is only possible after full payment has been received. Sold ex works as seen, without any claims for statutory warranty, guarantee, or post-warranty obligations. "All warranty is excluded to the extent permitted by law; in particular, rescission and reduction are excluded."

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device Ppsdpfsyfhi Njx Aalel - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: ready for operation (used), Year of construction: 1999, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 860, Cutting machine with a capacity from 20x60 mm up to 300x450 mm, machine length 18 m. Ppodpfxoych His Aalol

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Pedpoyb Rxljfx Aalepl Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees Ppsdjya Dc Ijpfx Aaljl - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: excellent (used), Hundegger K2 Industry 5-Axis CNC Timber Joinery Machine 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations: Section probe detector, section measurement – Cutting: All straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip rafters, rebates, half-lap joints, chamfering, groove, straight and angled birdsmouth groove, web notch – Milling with aggregate head (hogging head) and other milling cutters, mortise and tenon, mortises, notches, scarf joints, dovetail joints (straight and angled), Gerber scarf – Drilling: straight and angled, deep-hole drilling – 1x side drill and 1x underside drill. Ink marking system – Piece identification labelling Control console and software: The control system allows importing data from CAD software and automates the calculation of complex machining operations. Work is currently performed with CADWORK software (not included in the sale of the machine). The machine features a pit designed for the elimination of wood waste and sawdust. This HUNDEGGER K2 CNC is fully upgraded and refurbished! Dimensions: - Machine: Length 22,900 mm x Depth 5500 mm x Max. height 2550 mm (on the floor) - Waste pit: approx. Length 12,000 x Width 2,400 x Depth 950 mm - Timber feeding length: 13,000 mm - Max. timber output length: 13,000 mm - Transverse infeed conveyor: 5 chains, 2,200 mm - Extendable timber support table - AQF feed chain with shaft extension, 2,900 mm - Under-table pivoting crosscut saw Podpfx Aox U Ti Usaljpl - Right-hand safety flap Waste evacuation system located below – Control for waste extraction system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger joint cutter, combined vertical tool holder, drilling unit, finger joint cutter, combined horizontal tool holder, rebate unit / Drilling unit 1 and 2 – Marking device – Pneumatic beam turn-over station – Outfeed table with 7 arms Year of manufacture: 2003 Purchased by current owner in 2020. Machine was fully reconditioned in 2020: electrical, mechanical, pneumatic, tooling, and IT systems (dismantling parts and motors, replacement of bearings, hoses, cables, guideways, IT update and EKP data export, cleaning, new tooling in 2020) The machine is in very good technical and visual condition.

Condition: excellent (used), Year of construction: 2013, feed length X-axis: 13,000 mm, saw blade diameter: 800 mm, working length: 13,000 mm, Equipment: safety light barrier, We are offering this very well-maintained Hundegger K2i-625 (UF5) joinery machine, year of manufacture 2013. Fully automatic wood infeed with feed roller conveyor and loading & infeed transporters Under-table swiveling crosscut saw 11 kW Universal 4-axis milling unit (UF4) Combined support for vertically operating tools Drilling unit 2.2 kW – drilling direction vertical Combined support for horizontally operating tools Drilling unit 2.2 kW – drilling direction horizontal Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" incl. machine frame Electronic control with EKP software Refined machine surface Extension of the cross conveyor and feed roller conveyor for timber lengths up to 13 m Ppsdpex Trllefx Aalel 5-axis universal milling unit – UF5 (surcharge for 4-axis) Drilling unit 2.2 kW – drilling direction horizontal Front marking unit (operator side) InkJet 4 HP system on the stop side Remote maintenance (incl. portable video camera) Control unit for waste removal with operating buttons Extension of roller conveyor on the output side Spare saw blade 800 mm Dovetail cutter 60x3 Bx16, 5 mm (with reversible blades) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, functionality: fully functional, working width: 520 mm, Equipment: safety light barrier, Very well-maintained Hundegger K2, fully operational. Available from January 2026. Can be inspected in operation at any time! Ppjdpfx Ajx Hi Htoaljl

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Ppedpox Ehmajfx Aalel

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Ppedexx Upnopfx Aalsl Specification - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. - Centrex cutter guard in Lieu of standard CPS guard.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, For sale: Hundegger K2i carpentry center, year 2008. The machine is in very good condition and comes excellently equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis saw aggregate - 5-axis milling aggregate - Horizontal and vertical drilling - Additional end milling unit for processing rafter ends from below - Slotting unit with complete set of 8 and 10 mm chains Psdpfx Aoxx T Rdealopl Note: The slotting unit is rare equipment used for manufacturing trusses with concealed metal plates – a very useful feature. We can install this machine – we already have experience in installation and commissioning. Additionally, we can offer implementation services, meaning software training and assembly/mounting. The machine is in very good technical condition, regularly serviced and meticulously maintained, and is currently in operation. We are selling because we have purchased a much newer model. Note: Available for collection February–March.

Condition: used, Year of construction: 2021, Dimensions of the blocks:​ Ppsdjxxw U Hepfx Aalsl Length : 114 mm [4.5 in] to 914 mm [36 in] Width : 38 mm [1 1/2 in] to 203 mm [8 in]​ Thickness : 16 mm [5/8 in] to 63 mm [2 1/2 in] ​ Production Input : Up to 200 lugs per minute Output : Up to 15 press cycles per minute

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation Podpjxxhwlefx Aalopl • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Ppodpfxexxa Dwe Aalsl Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, For sale: CORALI line for the production of thin-walled box bottoms. A complete CORALI line is offered, including: Debarking machine, veneer manufacturing machine, conveyor for automated assembly of thin-walled box bottoms. Specifications: Debarking unit output: 🔹 3–6 m³ with log length 850 mm 🔹 26–30 m³ with log length 550–650 mm (per 8-hour shift). Line capacity: 🔹 6,300–10,500 bottoms (veneer thickness 4 mm) 🔹 8,100–15,500 bottoms (veneer thickness 1.4 mm) Podpoxv St Sjfx Aalepl

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Ppodpfx Ajxqd T Hoalsl Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Psdpoxp Ecyefx Aalepl Motor power: 2 x 15 kW

Condition: used, 60-pocket suction filter with 5 bags, complete with 9 kW suction unit and control panel, used. Height when assembled: 3.65 meters Pjdpsxlb Sijfx Aalspl

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Ppjdoxftalspfx Aalsl 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Automatic hydraulic press with GANG–NAILS connectors for trusses. Hydraulic press for pressing metal connectors and manufacturing trusses and other structural elements. Machine dimensions: 5.0 x 1.30 m – Left roller table 12.95 x 3.9 m – Right flat table 12.00 x 3.90 m – Pressing area 400 x 130 x height 20 cm – Total length 26.30 m x depth 3.90 m (tables) and 5.0 m (press). Includes a large batch of cartons of GANG–NAILS connectors. The right table is used for assembly and preparation of trusses and for distributing GN plates. Then, stepwise feed and clamping in the press. Finished elements are received on the left roller table. Manual removal of the item. In good technical condition. Psdsxdiucopfx Aalopl

Condition: good (used), Year of construction: 1994, Chalet notching machine with 10-meter Tiger stop pusher, equipped with: 1 horizontal milling unit on top, 1 horizontal milling unit below, 1 front/rear milling unit, 1 horizontal drilling unit diameter 16 mm, 1 automatic Tiger stop of 10 meters, year: 2001, effective working length: 9.20 m. Psdpexbn N Tefx Aaljpl

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: Ppsdpoxa Ettsfx Aaljl 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical specifications: Cast iron table dimensions: 905 x 372 mm Number of spindles: 21 Distance between spindles: 32 mm Ppsdpexauw Usfx Aalol Maximum distance between spindles: 640 mm Maximum horizontal drilling height: 60 mm Maximum tool diameter: ø40 mm Workpiece thickness: 10–85 mm Maximum panel width between arms: 833 mm Maximum drilling head travel: 70 mm Number of clamping holders: 16 Motor power: 400 V / 50 Hz, 1.8 kW (2.5 HP) Motor speed: 2800 min-1 Operating pressure: 5 bar Weight: 320 kg Pneumatic adjustment of the drilling head vertically and horizontally. Drilling head lockable at 0° – 45° – 90° positions. Standard includes 2 pneumatic clamps for workpiece securing. Drilling height adjustable via handwheel with mechanical display. Drilling depth adjustable via 5-position turret stop.

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 350 mm, working length: 3,200 mm, working width: 3,200 mm, saw blade speed: 4,600 rpm, saw drive: 7,500 W, working height: 60 mm, Equipment: documentation/manual, Homag Optimat CH04/32/32 Panel Saw – Fully Equipped Still in use to date, 1 to 2 days per week, but offered for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Saw motor (7.5 kW) – Scoring saw (1.1 kW) Main saw RPM: 4600 rpm – scoring saw 5100 rpm ✅ Ease of use Air blower unit for easy positioning of panels to be cut Immediately available, fully equipped 📍 The machine is located in Slovakia and must be dismantled and collected on site by the buyer. Psdpfx Aaow S Tqlolepl

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms. Pjdpfx Aaew Rg Emolopl