JJ Trading GMBH

Condition: used, Year of construction: 2014, operating hours: 17,000 h, With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Operating Hours: 17,000 hours Gtodpfxjyub Ece Ahvow Capacity: 300 – 500 tons/hour Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Weight: 52,500 kg Year of Manufacture: 2014

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour Gtodpfsyub Dlox Ahvsw • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet Gtedeyt Iawspfx Ahvjw + 2 pairs of new shafts Machine is without gearbox.

Condition: used, Year of construction: 2010, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. This machine is ideally suited for use in industrial and craft businesses as well as for wholesale and retail operations dealing with Styrofoam packaging materials. Throughput performance: Screen 12 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the screen set used, the shredding process alone reduces the volume of your Styrofoam waste by a ratio of 3:1. Custom designs are available on request. VAT is shown separately on the invoice. Gtedpfxjytrybe Ahvjw Nationwide shipping within Germany is included; surcharge applies for islands. If you have any questions, please feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity Gedpfjyr A T Nex Ahvotw -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. Gtjdpeyr A Tpefx Ahvow When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; Gtodpfx Aoyr A Tijhvew -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, overall weight: 50,500 kg, Sandvik QJ341 jaw crusher 2016 year 2100 hours on crusher 4700 hours on engine CAT C9.3 engine Inlet 1200x750 mm CSS range from 0-65 to 0-150 mm Gedoyn Inkspfx Ahvetw Capacity 150-250 tons per hour depend on material Weight 50,5 tons Fitted with side conveyor Fitted with overband magnet Machine in great working condition, ready for work like NEW

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 – used Condition: good For splitting and crushing wound paper, cardboard, or plastic rolls on cardboard cores - Motor power: 15kW / dual pump 32A / 5-pole – 50Hz-3LNPE - Control: PLC-based, with two-hand safety control - Cutting force: 2x 25t - Blade length: 2500 mm Godpfxeyn Agho Ahvotw - Max. opening: 1600 mm With roll support stand for increased working height and single-sided roll discharge – roll feed height approx. 1400 mm Factory inspection performed before delivery

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, Product description: The ASCO Technology Jaw Crusher is a robust and compact jaw crusher designed for efficient size reduction of various materials. With its heavy-duty construction, wear-resistant 18% manganese cast jaw plates, and compact footprint, this machine is ideal for use in recycling and material processing applications. The crusher is easy to operate via an electrical control panel with emergency stop and motor thermostats, and it can be expanded with several optional features such as conveyors and a magnetic separator. A reliable solution for users looking for an efficient machine for pre-crushing and material preparation. Technical data • Jaw opening: 600 x 300 mm • Weight: 1,500 kg • Feed hopper: 1,300 x 800 mm • Discharge opening / setting range: 100 – 150 mm • Power: 15 – 35 kW Standard equipment Gsdpoymm Tiefx Ahvstw • Standard upper feed hopper • Standard support frame • Jaw plates made of 18% manganese cast steel • Electrical control panel with emergency stop and motor thermostats Optional equipment • Motors with different voltages/frequencies (for non-EU countries) • Customizable feed hopper • Conveyor belt for input and output material • Magnetic separator Applications • Recycling of mineral materials • Construction and demolition waste processing • Pre-crushing for downstream processing steps • Stationary material processing lines

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Gtedpfx Ajylhbfjhvjw Serial No.: 1896 Year of construction: 2008 Running Hours: unknown Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: + Cutting unit, hopper, frame, and control unit + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: refurbished (used), Year of construction: 2009, operating hours: 5,900 h, Completely overhauled Gtsdpfeylddcsx Ahvsw Long belt

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Weight 1300 kg Gtodpoyk H Tqefx Ahvow

Condition: new, Year of construction: 2025, operating hours: 100 h, HAMMEL Metal Processing Plant consisting of: HAMMEL Shredder Type VB 950 DK (Twin-Shaft Shredder) - Diesel engine CAT C18, approx. 780 HP - Mounted on crawler tracks - Shredding shafts (metal design) - Breaker bar with comb - Spiral fan HAMMEL Metal Screen Type SMA 150 E - Mounted on hooklift frame - Vibro finger screen - Permanent magnetic drum - Discharge conveyor FE - Discharge conveyor NE - Discharge conveyor for oversize material HAMMEL Eddy Current Separator Type MWA 1000 E - Mounted on hooklift - Vibratory chute - Discharge conveyor for aluminum - Discharge conveyor NE HAMMEL Sorting Conveyors Type MFB 800 E (3 units) - Mounted on hooklift - 4 sorting stations - 1 discharge conveyor with roof, railings, and walkways HAMMEL Return Conveyor - Transports oversize material back to the shredder Gtodeygl Apopfx Ahvew Special offer: 30% discount Note: Video and images are examples.

Condition: new, Year of construction: 2026, Hydraulic motor for Chieftain 1400, Chieftain 1800 screenbox. We are polish distribiutor of David Brwon Hydreco, original genuine new pumps. All Powerscreen hydraulic motors in stock. Motor designed for Powerscreen Warrior 1400, Warrior 1800, Chieftaun 2100 with CAT engine and many more!! We can arrange worldwide shipping in very low price! We have also many more Hydreco pumps and motors in stock in stock. Hydraulic motors for crusher, hydraulic motor for screener, all brand, cheapest on the market. 07251123 M3C2208G5B25D Gedpjygh Tqjfx Ahvjtw

Condition: used, functionality: fully functional, We are offering this used Coeck reduction unit, year of manufacture unknown. Gtedpfx Aoyft R Eehvsw If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Gtsdpfx Aoydcmmehvsw Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Gtedsyazl Hspfx Ahvew Feed hopper 3,68 m3 Fitted with overband magnet Side conveyor can be bought. Wear plates 90% blow bars martensitic-ceramic Machine in great working condition, can go straigt to work

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Gtjdpfx Ahex Tfdhjvjw Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, Year of construction: 2006, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crusher plant, twin-shaft shredder, slow-speed, drive: electro-hydraulic, 200 kW electric motor, hydraulic unit with control cabinet and operator panel. The plant has been out of operation for approx. 0.5 years. Two brand new rotor shaft bearings and labyrinth seals were installed on the drive side two years ago. Electrical and hydraulic systems are untested: must be connected. Godpfx Asx Nkdrohvetw

Condition: used, Shredder, Erdwich M700/1-600, used machine Manufacturer: Erdwich Gsdpex I Dmwjfx Ahvotw Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Overall dimensions: 1750 × 1820 × 1810 mm Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing Gtodpfxsx I Dc Ej Ahvow 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: used, Year of construction: 2006, Plastic Cutting Mill – Sales Offer High-performance industrial cutting mill designed for shredding plastics and plastic films. Front feeding system combined with a hinged feed hopper ensures comfortable and safe operation. A heavy-duty rotor with a precision knife system and screen provides efficient and uniform cutting. Ideal for recycling and production lines. Technical specifications: Motor power: 35 kW Throughput: up to 600 kg/h Rotor diameter: 420 mm Rotor speed: 430 rpm Feed opening: 915 × 502 mm Max. input film width: 915 mm Rotary knives: 3 + 3 Fixed knives: 2 + 2 Screen hole diameter: 8 mm Drive system: 5 V-belts Material feeding: front feeding Feed hopper: hinged, manual tilt control Total machine weight: 1900 kg Gtodpfxjx Itymj Ahvsw Robust design, high efficiency, ready for industrial operation.

Condition: used, functionality: not functional, power: 29.42 kW (40.00 HP), Year of construction: 1976, Used Kue-Ken jaw crusher 105. For details, see photos. Operating manual available. Price ex works, excl. VAT. The left and right bearings need to be replaced. Gjdpfsx H Nwxox Ahvjtw

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Gtsdpfox Hyfyjx Ahvjw Weight: 1800 kg Engine power: 11 kW