Werner Kloske - Maschinenhandel -

Condition: excellent (used), functionality: fully functional, For sale: this lathe, already dismantled and stored in Ostrava. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1,080 mm Swing diameter over carriage: 720 mm Turning length: 9,000 mm Minimum turning diameter: 20 mm Spindle speeds: 1.8 – 355 rpm Main drive power: 40 kW Workpiece weight: 10 t Surface grinder for entire length, bore up to 430 mm External taper up to 450 mm Maximum diameter in chuck: 780 mm Maximum bore length: 800 mm Ledpfxsycvtdo Ad Njhb Centre taper: metric 80

Condition: used, Year of construction: 1970, MAKE STANKO (RUSSIA) MODEL 165 DISTANCE BETWEEN CENTER 3000 MM CENTER HEIGHT 530 MM SWING OVER BED 1060 MM CROSS OVER CARRAIGE (MAX JOB DIA. OVER CROSS SLIDE) 700 MM SPINDLE SPEED 50–500 RPM BED WIDTH 770 MM SPINDLE BORE 95 MM MAX. WORKPIECE WEIGHT CAPACITY 10 TONNES APPROX WEIGHT 12 t Ljdpfoycl Ttsx Ad Njhb

Condition: good (used), Year of construction: 1992, Swing diameter over bed: 1000 mm Spindle diameter: 128 mm Turning length: 8000 mm Total power requirement: 22 kW Machine weight approx.: 20 t Ledpjya D Tysfx Ad Nehb

Condition: good (used), Year of construction: 1993, Swing diameter over bed: 1000 mm Spindle bore: 128 mm Turning length: 5000 mm Total power requirement: 22 kW Lhedpfx Ajya D Tmjd Neb Machine weight approx.: 16 t Space requirement approx.: 7.8 x 2.3 x 1.8 m

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm Lhedpfjx Urtrox Ad Neb 280 mm 104 mm 11 kW

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Lhsdpfx Ajx Tgr Tjd Neb Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 2655, turning diameter: 1,250 mm, turning length: 1,000 mm, total length: 2,750 mm, total width: 2,975 mm, total height: 4,100 mm, spindle speed (max.): 250 rpm, spindle speed (min.): 5 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 5 rpm, type of input current: three-phase, overall weight: 17,500 kg, disc diameter: 1,120 mm, workpiece weight (max.): 4,000 kg, faceplate diameter: 1,120 mm, Vertical Turret Lathe STANKO SEDIN 1512 (Vertical lathe / vertical turning machine) The STANKO SEDIN 1512 is a conventional vertical turret lathe designed for heavy turning and machining of large and heavy workpieces. Manufactured in the former USSR, this machine is recognized for its robust mechanical design and suitability for industrial heavy metalworking applications. The machine features a large 1120 mm diameter faceplate and supports workpieces with a maximum turning diameter of 1250 mm and a maximum turning height of 1000 mm. Depending on configuration, the lathe can handle workpieces with weights up to approximately 3200–4000 kg. The spindle speed range of the rotary table is approximately 5 to 250 rpm, allowing for versatile turning operations on different materials and diameters. The machine is driven by a main motor with a power of around 30 kW. The solid single-column construction and substantial machine weight of about 16 000–17 500 kg ensure stability and rigidity during machining. The STANKO SEDIN 1512 is suitable for heavy turning, facing, boring, and drilling operations on large components commonly found in machine building, heavy engineering, and repair facilities. Lhjdsx Sqrbjpfx Ad Nsb Key Features: *Conventional vertical turret lathe *Large 1120 mm faceplate diameter *Turning diameter up to 1250 mm *Maximum workpiece height 1000 mm *Workpiece weight capacity up to ~3200–4000 kg *Rotary speed range approx. 5–250 rpm *Main drive approx. 30 kW motor *Rigid industrial construction Typical Applications: *Turning of large discs and rings *Heavy part machining *Boring and facing of cylindrical components *Maintenance and repair workshops *Heavy fabrication environments

Condition: ready for operation (used), functionality: fully functional, turning diameter: 2,000 mm, center height: 1,000 mm, center width: 4,000 mm, spindle speed (max.): 224 rpm, workpiece weight (max.): 12,500 kg, TECHNICAL DETAILS Lodpfx Adjx Rbh Rs Nehb Centre height: 1,000 mm Swing diameter over bed: 2,000 mm Distance between centres: 4,000 mm Spindle bore: 100 mm Spindle speed: 11.2 - 224 rpm Max. workpiece weight: 12,500 kg MACHINE DETAILS Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 5,400 x 2,600 x 2,550 mm Net weight: 15,000 kg EQUIPMENT Digital readout Acu-Rite 3-A

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 Lhodpfx Aex Iriajd Nob - Options: Three-jaw chuck, Four-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, TOS SU 150 Variant CNC Lathe TOS SU 1500 Variant with Heidenhain Control, year of manufacture 1999, in excellent original condition The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant! Technical Details: Lsdpfsx Dy I Tjx Ad Nshb Year of manufacture: 2004 Working Range Swing diameter over bed: 1500 mm Swing diameter over support: 1190 mm Swing diameter over extended slide with T-slots: 1100 mm Swing diameter over right-angle hardened guide with T-slots: 1020 mm Distance between centers: 2000 mm Max. workpiece weight (without/with support): 6000/8000 kg Spindle size: 11 DIN 55027; bayonet Spindle bore: 128 mm Speed range: 4 - 630 rpm Main drive power: 37 kW Max. spindle torque: 12,000 Nm Tailstock Quill diameter: 165 mm Internal taper: 100 (1:20) mm Reduction sleeve: 100 (MK6) Total power consumption: 67 kVA Weight: 9,400 kg The universal spindle lathe SU 1500 Variant is a numerically controlled machine designed for roughing and finishing of shaft and flange parts, as well as for threading, drilling, taper turning, and machining of various rotationally symmetrical surfaces. The machine is built with a rigid horizontal bed, the guideways are hardened and ground, and the counter surfaces on the longitudinal slides are coated with Turcite B sliding material. The SU 1500 Variant lathe is a machine with automatic cycle control, equipped with a Heidenhain control system. The feed drive for the longitudinal axis (Z-axis) is provided by a servo drive directly to the ball screw. The cross-feed drive (X-axis) is also provided by a servo drive directly to the ball screw. Both feeds are measured by rotary encoders mounted on the servo motors. The machine can be operated either manually or in controlled (automatic) mode. About the machine: Offered here is a CNC lathe TOS SU 1500 Variant with Heidenhain control, year of manufacture 1999. This lathe is in very good original condition. Coming from a shop where it was only used occasionally for special builds. The control system is very user-friendly. The ways are regularly lubricated by the central lubrication system. The TOS SU 1500 Variant has been mechanically and electrically inspected by us. Take the opportunity to view and test the TOS SU 1500 Variant under power at our premises. You will find further lathes from reputable manufacturers on our website.

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE Lodpfex Dmi Dsx Ad Njhb METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhjdpfxex Di Rqe Ad Njb

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. The machine comes with steady rests and an additional milling device. Turning length: 8,000 mm Swing over bed: Ø 2,020 mm Swing over cross slide: Ø 1,600 mm Spindle bore: 120 mm Spindle speeds / ranges: 180 rpm Spindle power: 80 kW Tailstock quill diameter: Ø 400 mm Tailstock quill stroke: 250 mm Dimensions: Length: 15,360 mm Width: 3,520 mm Height: 2,600 mm Weight: 78,000 kg The machine will be released from production at the end of January 2026. Lhjdpfx Adsx Auwgs Njb

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Lhsdpexxvqaofx Ad Nsb

Condition: like new (used), Year of construction: 1999, functionality: fully functional, I am selling this lathe; it is connected and can be tested under power. Lsdpexxtc Tjfx Ad Nshb Swing diameter over bed: 1,600 mm Swing diameter over cross slide: 1,300 mm Turning length: 6,000 mm Siemens Sinumerik 840D A job is currently being completed on the machine. Available at the end of January 2026.

Condition: used, functionality: fully functional, GURUTZPE B10000 LATHE 10 METERS BETWEEN CENTERS 1900mm SWING OVER GAP 1600mm SWING OVER BED 1200mm SWING OVER CARRIAGE 105mm SPINDLE BORE / BAR CAPACITY 4-JAW CHUCK Lhsdpfjxwwi Iex Ad Nsb FIXED AND STEADY RESTS

Condition: used, Year of construction: 1971, functionality: fully functional, For sale: this lathe is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1,000 mm. Turning length: 12,000 mm. Lhedpfxsxwqk Se Ad Nsb

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine; it is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1250 mm – Swing diameter over support: 1000 mm – Turning length: 6000 mm. Lhjdpfx Asxwqk Eed Nsb

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Lhsdpfx Aexwmbmod Neb

Condition: excellent (used), spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, total length: 11,380 mm, total width: 2,200 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 1,876 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, overall weight: 17,730 kg, quill mount: MK 5, faceplate diameter: 1,000 mm, Heavy duty lathe is in a very nice condition, under power. It is equipped with lunette and steady rest. Carriage is overhauled, shaft bronze bushings are new. Lodpfx Adsxwd D Es Nshb

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Lodpfoxtbf Ejx Ad Nehb Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Distance between centers: 4000 mm Center height: – over bed 650 mm – in bridge area: 800 mm Swing diameter: – over bed 1200 mm – over cross slide 1000 mm – in bridge area 1600 mm Platform: 1200 mm Bore diameter: 140 mm Speed: 2–800 rpm Bed: – bed width 650 mm – longitudinal slide length 820 mm – total cross slide travel: 600 mm – upper slide travel: 300 mm GIVI 3-axis digital readout Electric motor 28.5 kW Dimensions: 6325 x 1400 mm Lhodpjxq E D Tefx Ad Nsb

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Ljdpfx Aoxmd U Aed Nohb Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: good (used), Year of construction: 1981, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,380 mm, turning diameter over bed slide: 930 mm, turning length: 1,000 mm, total length: 2,800 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,200 kg, Lathe TPC 90 x 1000. Manufacturer: PORĘBA (PL) - 1981. Turning diameter over bed: 930 mm. Turning diameter over carriage: 630 mm. Lhodpfx Adjxiwfys Nob Turning diameter in gap: 1380 mm. Spindle bore: 95 mm. Spindle speed range: 8–800 rpm. Max. turning length in gap: 400 mm. Max. turning length with tailstock: 750 mm. Max. turning length without tailstock: 1000 mm. Max. travel of inner bed: 450 mm. Saddle feeds range, 80 steps: - Longitudinal: 0.1–12.8 mm/rev. - Cross: 0.05–6.4 mm/rev. 2-speed motor: 15/22 kW. Morse taper internal: No. 6. Dimensions (L x W x H): 2780 x 1800 x 1750 mm. Weight: 6200 kg. Equipment: 4-jaw faceplate 800 mm, 3-jaw self-centering chuck 400 mm, tailstock.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Lhjdpfxoxc In So Ad Neb Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control