Brauner Recyclingtech GmbH

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min Bjdpfs Ah Eb Tox Akneww sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 2019, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,280 °C, inner dimension length: 350 mm, inner dimension width: 350 mm, inner dimension height: 250 mm, Equipment: documentation/manual, Electrically heated chamber furnace, Nabertherm Type: N 31/H Maximum temperature: 1280 °C Bsdpe Ah Eb Eefx Akneww Internal dimensions: approx. 350 x 350 x 250 mm Power: 15 kW Controller: P470

Condition: like new (used), functionality: fully functional, Year of construction: 2011, operating hours: 350 h, overall weight: 1,600 kg, FERRARI F 40 DT – REGISTERED AGRICULTURAL TRACTOR – YEAR 2011 – 350 HOURS – MANUAL GEARBOX – 1371 CC – 35 HP – 25 KW – REAR LIFT – FOR INFORMATION, CONTACT DAVIDE: 3355266031. Bsde Ah Ebzopfx Aknoww

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: Multifix compatible -Recording dimensions: see photos Bwjdpo Ah Ebwjfx Aknew -Tool holder: Ø 40 mm -Number: 2x steel holders available -Price: per piece -Dimensions: 120/80/H120 mm -Weight: 2.7 kg/pc.

Condition: used, total width: 1,250 mm, total length: 1,800 mm, total height: 1,500 mm, Year of manufacture: 1998 Colour: Grey Empty weight: 560 kg - Year: 1998 - Serial number: 450144 - Main motor power [kW]: 30 - Flow capacity [m³/h]: 14630 - Negative pressure [Pa]: 4685 - Connection diameter [mm]: 470 - Output diameter [mm]: 440 - Transport dimensions: 1800mm x 1250mm x 1500mm (l x w x h) - Transport weight [kg]: 560kg - Transport packages [pcs.]: 1 Financial information Bodpfxs Ah Ebto Aknoww VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,130 mm, total length: 1,200 mm, total height: 1,650 mm, Year of manufacture: 2007 Colour: Grey Empty weight: 272 kg - Year: 2007 - Serial number: 400492 - Main motor power [kW]: 18.5 - Flow capacity [m³/h]: 10100 - Negative pressure [Pa]: 3110 - Connection diameter [mm]: 420 - Output diameter [mm]: 380 - Transport dimensions: 1200mm x 1130mm x 1650mm (l x w x h) - Transport weight [kg]: 272kg - Transport packages [pcs.]: 1 Bwjde Ah Ebpopfx Aknow Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Coolant pump, stainless steel coolant reservoir, coolant pump, expansion tank -Expansion tank: Stainless steel tank for coolant, divided into 3 sections -Connections/Division: see photos -Container: with fill level indicators -Tank dimensions: 750/300/H250 mm -Overall dimensions: 950/330/H365 mm -Weight: 31 kg Bwedpfxe Ah Eblo Aknjw

Condition: used, Centrifugal Pump, Pump 7.5 kW, Ritz, Used Machine Overall Dimensions: Length: 650 mm Bwsdpfx Ake Ah Ebhenow Width: 450 mm Height: 510 mm Manufacturer: Ritz Electrical Data: 400V; 7.5 kW; 15.1 A Flow Rate: 54 m³/h Head: 16 m

Condition: used, Axial Pump, Pump, Andritz 13.9 kW, Used Machine Manufacturer: Andritz Bwods Ah Ea Sepfx Aknsw Model: HP 50-180.1/2/S Year: 2020 Flow Rate: 42 m³/h Head: 80 m Electrical data: 400V; 13,9kW; Overall Dimensions: Length: 1090 mm Width: 390 mm Height: 420 mm Weight: 103 kg

Condition: good (used), first registration: 09/2018, cooling unit manufacturer: ThermoKing, Year of construction: 2018, For sale: refrigerated box body with doors. Equipped with a Thermo-King T-1000R refrigeration unit. Year of manufacture: 2018. Diesel and electric cooling. Bwedpfxs Ah Ea Io Aknew 9,338 operating hours. Box length: 7.50 m (external). Height: 2.60 m (external). Price does not include the truck or the tail lift.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 149804-5, Offer 26195 - Operating hours: 63,733 h - Operating pressure: 8 bar - Delivery rate: 5.93 m³/min - Drive: 400 V / 37 kW Bwsds Ah Ea Dopfx Aknjw - Motor speed: 3000 rpm - Suction pressure: 1 bar - Space requirement: approx. W 1000 x H 1450 x D 1300 mm - Weight: approx. 560 kg

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 3,500 kg, fuel type: electric, – Year of manufacture: 2015 – DTR, CE – Capacity up to 20 m³/h TECHNICAL PARAMETERS: – Width of feeder inlet: 500 mm – Height of feeder inlet: 180 mm – Diameter of knife shaft: 450 mm – Width of shaft: 515 mm – Two knives – Knife length: 515 mm – Toothed draw roller at the bottom – Power of motor for the bottom toothed draw roller: 2.2 kW – Toothed draw roller at the top – Power of motor for the top draw roller: 2.2 kW – (Length / width) of the feeding conveyor belt: 5000 x 520 mm – (Length / width) of the discharge conveyor belt: 10500 x 220 mm – Power of motor for the discharge conveyor belt: 3 kW – Belt feed forward / backward Transverse chain feeder / buffer for the shredder: – Overall length: 10600 mm – Width of feeder: 1750 mm – Distance between outermost chains: 1650 mm – Distance between chains: 550 mm – Height of feeder from base: 1500 mm – Motor power: 4 kW – 4 chains Transport dimensions: Bwjdpfxo Ah Eans Aknsw – Length: ~1300 cm – Width: 240 cm – Height: 225 cm – Weight: ~3500 kg

Condition: used, • ENORM PRIMO – TOP model • CONSTANT THICKNESS MACHINE / with automatic head positioning • Wide-belt calibrating and fine-finishing machine • Combined unit with contact roller and sanding pad unit, including air shoe • Digital thickness gauge for workpiece thickness • Belt drive motor power approx. 9 kW • Contact roller pressure adjustable in infinitely variable steps according to grit scale • Infeed table and outfeed table with roller support Bjdj Ah Eacjpfx Aknsww • Working width 1100 mm • Feed rate infinitely variable, 3 – 15 m/min • Machine is in FULLY OPERATIONAL condition, from a craft workshop • Available from stock in Lieboch

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 798 C Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. The highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 650 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Bwedpo Ah D U Rjfx Aknjw Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 650 Operating pressure [bar]: 30–160 Max. Heating temperature [°C]: 80–155 Connected load [kW]: 4.5 Hose length [m]: 10 Weight [kg]: 96 Dimensions (L x W x H, mm): 940 x 600 x 740 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm (including KIT 70) Wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for comfortable setup Including AGIESETUP 3D Including automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Bwjdpo Ah D U Aefx Aknew Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been completely cleaned, overhauled, and thoroughly tested. You will receive a 6-month warranty on the machine. We would also be happy to perform an individual test for you on the CUT 3000. Includes operator training at Techma on your overhauled machine. We would also like to offer you the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: excellent (used), functionality: fully functional, X-axis: 3,500 mm Y-axis: 3,250 mm Z-axis: 1,500 mm Bodpo Ah D Uqsfx Aknjww Spindle travel: 600 mm Spindle diameter: 150 mm Table size: 3,000 x 2,500 mm Max. workpiece weight: 40 tons Control system: SINUMERIK 840 C Includes swivel head.

Condition: used, Centrifugal Pump, Pump, Ritz 1.5 kW, Used Machine Overall Dimensions: Length: 210 mm Width: 200 mm Bwsdpfxj Ah D Ufo Aknjw Height: 710 mm Flow Rate: 3 m³/h Head: 60 m Year of Manufacture: 1996 Electrical Data: 400V; 1.5 kW; 3.9 A

Condition: new, Year of construction: 2025, color: grey, We at Eventmobile Saar GmbH offer you an unbeatable complete package for professional mobile catering operations. Our new 20' gastro sea container combines elegant design with the best German and European brand quality – from the insulated structure to the custom-made stainless steel work surfaces and high-quality catering equipment. Whether for snacks, street food, catering, or events: this container is fully equipped, can be used independently, and is designed for year-round operation. HIGHLIGHTS & BENEFITS 🌡️ Suitable for year-round use: High-quality structure made of isothermal aluminum-fiberglass laminate for optimal internal temperatures in any season. ⭐ Brand-name catering equipment: Certified professional gas appliances from the quality manufacturer Bertos, fully made of stainless steel. 🔌 Ready for use & self-sufficient: Complete water system, cooling & ventilation fully integrated. 🛠️ Flexible customization: Individual requests (payload, room layout, additional serving hatches) can be easily accommodated. ⏱️ Predictable availability: Delivery time up to 6 months, depending on the desired configuration. 🛡️ Safety & warranty: 1 year full warranty on the structure and all kitchen equipment. 📐 TECHNICAL DATA & DIMENSIONS 🏢 Manufacturer / Model: Gastro Sea Container / Food Container 🎨 Color: Anthracite (RAL 7016) 📏 Length: 5,898 mm 📐 Width: 2,352 mm 📏 Height: 2,385 mm GASTRO PROFESSIONAL EQUIPMENT 🔥 Gas appliances: - Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B - Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B - Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B ❄️ Cooling - Two small under-counter refrigerators "Liebherr" - Refrigerator with glass door, also suitable for beverages "Klarstein" - One small under-counter freezer "Liebherr" - Chest freezer for cooling from 4 to 10 degrees Bodpfx Akj Ah D Tzjnoww 💧 WATER SYSTEM & HYGIENE - Water system with water canisters, 30 liter capacity with fresh and wastewater canisters - Double stainless steel sink with faucet - Hygiene package consisting of a paper towel dispenser and a soap dispenser - 10-liter hot water boiler - Pump Additional equipment Serving area and work surface made of brushed stainless steel Two large, easy-to-open serving hatches for optimal customer contact Fireproof insulation wall throughout the cooking area Exhaust hood with labyrinth filters Non-slip flooring for catering Sneeze guard available as an option Convenient access via a separate side door Individual requests? We also manufacture to order! Other equipment, additional serving hatches or higher payload can be flexibly implemented. Call us and get a non-binding consultation!

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Bwjdpfx Aj Ah D Twoknjw Remote diagnostics setup (VNC/EDM viewer, installation and training) OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: good (used), mileage: 131,042 km, power: 105 kW (142.76 HP), first registration: 03/2019, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 6,130 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Alloy wheels - Manual - Radio/cassette - Rear view camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Unladen weight: 2286 kg, Gross vehicle weight: 3500 kg, Tow hitch, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: Halogen lamp, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 105 kW (141 hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L2H2 Mbux + Navi Automatic Camera Tow Hitch Euro6 Seat Heating 3-seater!, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,286 kg Payload: 1,214 kg GVW: 3,500 kg Functional Loading area height: 61 cm Bsde Ah D Tljpfx Aknoww Maintenance APK (Technical Inspection): valid until 03.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 352 € per month (delivery van, 72 months); Ask for more information and conditions

Condition: good (used), mileage: 91,733 km, power: 120 kW (163.15 HP), first registration: 05/2021, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 6,130 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Alloy wheels - Manual - Radio/cassette - Rearview camera - Blind spot sensor - Partition = Notes = Configuration: 4x2, Unladen weight: 2367 kg, Gross vehicle weight: 3500 kg, Tow hitch, Alloy wheels, Type of cab: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Silver, Metallic, Rearview camera, Type of lighting: Halogen lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 120 kW (161 hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Type of transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Sided wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Leather, Seat adjustment: Manual, L2H2 3.5T - Tow hitch Mbux10 + Navi 3-seater/ Empty Euro6 Alloy wheels 163 hp Automatic!, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 8 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,367 kg Payload: 1,133 kg GVW: 3,500 kg Functional Height of loading area: 61 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): Valid until 05.2027 Bedpfx Ae Ah D Thsknjww Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: 480 € per month (delivery van, 72 months); Ask for further information and conditions.

Condition: new, Mobile Culinary Container: Bar, Bistro & Lounge – All in One Transform any location into a hotspot with this high-quality catering container that combines functionality and modern design. This model is much more than just a sales stand – it's an inviting venue that encourages guests to linger. Bedpfx Ae Ah D Tdeknjww The Interior: Well-Conceived and Inviting Central Bar: The centerpiece of the container is the attractively designed bar area. Stylish pendant lamps in an industrial design provide the perfect lighting atmosphere above the bar, enhancing the modern look. Cozy Seating Lounge: The left side of the interior is designed as a comfortable seating lounge. Guests can enjoy drinks and food in a relaxed atmosphere here. The combination of soft cushions and the warm color creates a high level of comfort. Directly to the right of the entrance is this versatile piece of furniture that can be flexibly used as a counter, service station, or even a checkout area. Flexible Bistro Tables: Opposite the bar, directly in front of the large window front, are bistro tables with matching chairs. This area offers a great view of the outside and is ideal for a quick coffee or snack. Highlights at a Glance: Full-Surface Glass Front: The generous glazing across the entire front creates a bright, light-filled atmosphere inside and makes the space appear larger. At the same time, it offers passersby an attractive view and entices them to visit. Additional Outdoor Area: The container is designed so that it can be perfectly expanded with an outdoor area. Matching tables and chairs for outdoors (as shown in the picture) are the ideal complement to increase capacity and attract guests in good weather. Whether as a trendy coffee bar, an exclusive cocktail stand at events, a food station at festivals, or a pop-up restaurant in the city – this catering container is the ideal companion for mobile catering concepts that value quality and atmosphere. Give your catering business a mobile home that inspires. Contact me for more details and to arrange a viewing! I hope you like this description! You can, of course, adapt or supplement it to your liking, e.g., with specific dimensions or technical details. Price is plus delivery of 1,500.00 euros net within Germany.

Condition: good (used), mileage: 330,442 km, power: 176 kW (239.29 HP), first registration: 11/2019, fuel type: diesel, tire size: 245/45R19, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,370 mm, total width: 1,900 mm, total height: 1,910 mm, loading space width: 1,430 mm, loading space height: 1,300 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = Bodpfo Ah D Tajx Akneww - Heated mirrors - Electric - Tinted windows - LED lamp - Alloy wheels - Radio/cassette - Rear view camera - Lane keeping assist - Standard - Blind spot sensor = Notes = Configuration: 4x2, Unladen weight: 2087 kg, Gross vehicle weight: 3200 kg, Towing capacity, unbraked: 750 kg, Alloy wheels, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 6, Rear window wiper, Parking assist: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Black, Metallic, Heated mirrors, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 176 kW (236 hp), Number of cylinders: 4, Engine displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Roof rack: Standard, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 8, Seat arrangement: 2+3+3, Seat cover: Leather, Seat adjustment: Electric, Spare wheel, Tire type: Winter tires = Additional Information = General Information Number of doors: 2 License plate: G-745-NJ Axle Configuration Tire size: 245/45R19 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Weights Unladen weight: 2,087 kg Payload: 1,113 kg GVWR: 3,200 kg Functional Loading area height: 53 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): Valid until 05.2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1

Condition: used, mileage: 77,637 km, power: 129 kW (175.39 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: air conditioning, Open cargo area: 4.50 m x 2.30 m – Air conditioning – 3 seats – 3000 cm³ engine – 175 hp – permissible total weight 8500 kg – unladen weight 3164 kg = Further information = Front axle: Steerable Engine displacement: 3,000 cc Unladen weight: 3,164 kg Payload: 5,336 kg Bedpfxj Ah D S So Aknjww GVWR: 8,500 kg Price: On request Reference number: 41 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: good (used), mileage: 4,969 km, power: 85 kW (115.57 HP), first registration: 08/2021, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 6,100 mm, total width: 2,020 mm, total height: 2,850 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 2,000 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rearview camera - Fabric - Partition = Notes = Number of axles: 2, Configuration: 4x2, Cabin type: Single cab, Air conditioning, Number of airbags: 1, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Climate control, Seat heating, Bluetooth, Engine power: 85 kW (114 hp), Fuel: Electric, Euro: 6, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2H2 41KWH 150km-WLTP Snelladen Airco Camera Electric!, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 6 mm; Suspension: Coil spring Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring Functional Loading area height: 67 cm Condition Technical condition: good Bwjdpfxj Ah D Sye Aknjw Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €259 per month (van, 72 months); Ask for more information and conditions.