Hauk GmbH

Condition: used, Closes sausages and mortadella with a clip on both ends Dedpfez Nc U Dox Ailscn The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start. The machine sits on a stainless cabinet with castors, with an outfeed chute and roller conveyor for the product. It is pneumatically driven. We did not find a rating plate with the year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic double clipper Application: Mortadella and large sausage calibres Drive: Pneumatic Outfeed: Chute and roller conveyor Construction: Stainless cabinet on castors

Condition: used, Closes bags automatically in line The Leximat ASM 60 takes over the neck of filled bags with guide belts, twists it together and closes it, with no operator needed at the machine. That makes it a good fit behind a weigher or filler for bread, vegetables, fruit or other bagged goods. Dedpfsz Nc Uwox Ailjcn The machine is built entirely in stainless steel with a guard over the closing section and is operated from a touchscreen. Servo drives control the movements. We did not find a rating plate with the year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic bag closer (in line) Drive: Servo motors Controls: Touchscreen Construction: Stainless steel, with guard over the closing section

Condition: used, Metal detector with conveyor and reject bin This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin. Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture. Dodpfx Aijz Nc Udelscn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Metal detector with conveyor Reject: Reject bin beside the belt Belt: Blue plastic belt Controls: Own control box with start, stop and emergency stop Construction: Stainless steel, frame on castors

Condition: used, Year of construction: 1993, operating hours: 1,617 h, empty load weight: 3,840 kg, This Linde forklift, type H20T, will be auctioned online as part of our industrial auction / machinery auction due to the closure of Trola GmbH. The auction includes machinery, workshop equipment, plastic parts, and material handling equipment. Dsdpfx Aioz Nc T Teljcn You can find this and many other items on our platform.

Condition: used, Compact VFFS machine that forms, fills and seals bags This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser. Dcsdpfx Ajz Nc T Hoiljn It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form fill seal machine (VFFS) Bag style: Pillow bag Film transport: Two pull belts along the filling tube Controls: Touchscreen, adjustable seal temperatures Construction: Stainless frame on castors

Year of construction: 2008, condition: used, Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Asparagus peeler (Schäl-Automat) Stations: 8, each switchable Djdpfez Nc Tysx Ailecn Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW Construction: Stainless steel, on castors

Condition: used, Year of construction: 2021, Minebea Intec metal detector on conveyor, built in 2021 This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 400 × 165 mm (w × h) Dcodsz Nc Ttspfx Ailen Belt width: 350 mm Belt length: 2,100 mm Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)

Condition: used, Year of construction: 2022, Loma IQ3 metal detector on conveyor, built in 2022 Dedpfx Aioz Nc Tmjljcn This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 350 × 100 mm (w × h) Belt width: 300 mm Belt length: 2,300 mm Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Dsdpfxoz Nc S No Ailscn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Condition: used, Metal detector on its own conveyor This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes. Dcsdjz Nc S Aepfx Ailen The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Metal detector with conveyor Belt: Modular plastic belt Controls: Display with selection keys, stored product programmes Construction: Stainless steel, frame on castors

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. Dcedpsz Nc Svjfx Ailen * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.

Condition: used, Checkweigher for boxes and crates This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet. The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Checkweigher with roller conveyor Dcedoz Nc Spjpfx Ailsn Weigh platform: Roller conveyor Controls: Touchscreen with product data and statistics Construction: Stainless steel, on adjustable feet

Condition: excellent (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm Dsdpfxsz Nc Sio Ailocn - Number of pistons: 6 - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: used, Labelling line with two print and apply stations This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dcodpfsz Nc R Sox Ailjn More photos and full specifications: / Type: Labelling line with two print and apply stations Stations: 2, each with printer and label reel Controls: Display per station, push-button panel with emergency stop Construction: Stainless steel frame with conveyor

Condition: used, Year of construction: 2005, Cuts fillets into portions by weight Dodpfx Asz Nc Rrjilecn The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over. The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Portion cutter (fixed weight or fixed length) Products: Fish, chicken and meat fillets Belt: Perforated, 280 mm wide Scanner: Cameras with laser line Controls: Control panel with colour screen Electrical: 3 x 380–480 V Construction: Stainless steel

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. Dcjdpoz Nc Rlefx Ailon * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: used, machine/vehicle number: 46589, This universal tool milling machine with accessories, type: FP2, will be auctioned online as part of our industrial auction / machine auction due to the business closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment. Dcodpfx Aez Nc Rfsilen You can find this and many other items on our platform.

Condition: used, Platform scale up to 30 kg, reading in 10 g steps This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients. The indicator is an IT1000 with keys for tare, zero, totalising and printing. We did not find a rating plate with the make or year. Dcodpfx Aoz Nc N Isiljn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Platform scale Weighing range: 0.2 – 30 kg Division: 0.01 kg Indicator: IT1000 on stainless column (tare, zero, totalising, print) Construction: Stainless steel

Condition: used, Closes bags with a strip of tape around the neck The SBS FlexSeal closes bags, for example of bread, vegetables or fruit, by applying a strip of tape around the twisted neck. You hold the bag against the brushes, which draw in and twist the neck; the machine then wraps a piece of tape around it and cuts it off automatically. It is operated from an Allen-Bradley touchscreen and stands on a base with castors. We did not find a rating plate with the year of manufacture. Dcjdpjz Nc Nzsfx Ailjn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Bag closer with tape Infeed: Two brushes that draw in and twist the bag neck Controls: Allen-Bradley touchscreen Construction: Stainless steel, on castors

Condition: used, total width: 3,900 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90-58-07 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 Djdpoz Nc Nujfx Ailocn - - Max. planing block diameter [mm]: 200 - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - Max. planing width [mm]: 240 - Max. planing height [mm]: 120 - Feed table length [mm]: 1440 - Feed roller diameter [mm]: 1400 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 150 - Options: Powered rollers in table - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 35 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 128 - Power [kW]: 80.0 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed Dcsdpfx Aez Nc Nnsilen

Condition: used, This Mondiale lathe, type: Celtic 14, will be auctioned off online as part of our industrial auction / machine auction due to the closure of Trola GmbH – including machinery, workshop equipment, plastic parts, and material handling equipment. Dedpfxez Nc Nbs Ailecn You can find this and many other items on our platform.

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants Dcjdpoz Nc Iqjfx Ailsn This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet

Condition: used, clear span: 2,700 mm, total length: 13,980 mm, total width: 1,050 mm, total height: 4,600 mm, Technical data for the pallet racking system: Racking system: Jungheinrich Type: Delta Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 13,980 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Profile dimensions: 80 x 55 mm Dsdez Nc Ikspfx Ailscn Includes cross and diagonal braces, upright protectors and base plates The uprights are pre-assembled (welded frame) Height: 4,600 mm Depth: 1,050 mm 20x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Beam type: HN 120x30 Connector: 3 HK (hooks) Clear width: 2,700 mm 40x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1992, machine/vehicle number: 5075, This Weiler lathe, type: L2 PRIMUS GS, will be auctioned online as part of our industrial auction/machine auction, which includes the liquidation of Trola GmbH’s assets: machinery, workshop equipment, plastic parts, and material handling equipment. Dodez Nc H Tspfx Ailscn You can find this and many other items on our platform.