DASKOM CNC-Technik

Condition: used, functionality: not functional, incl. some tool holders incl. live driven tool holder Full C-Axis 360.000 Chip conveyor Problem on Turret Revolver live tools Max. turning Ø: 430mm X-Axis: 230mm Z-Axis: 495mm Spindle bore: 50.8mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:5000Rpm Length: 3400mm Rcsdjxtbqnjpfx Ag Aeh Width: 1900mm Height: 2700mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, operating hours: 43,698 h, turning diameter over cross slide: 570 mm, turning length: 635 mm, turning diameter: 570 mm, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, Equipment: documentation/manual, Turning diameter over bed: 570 mm Turning diameter over cross-slide: 420 mm X travel: 220 mm Z travel: 635 mm Tailstock travel: 550 mm Spindle power output: 21 kW Spindle RPM range: 25-5000 C-axis RPM: 100 C-axis increment: 0.04° Number of tool stations: 12 Rcedjxr U Scspfx Ag Ash Tool clamping taper: VDI 40 Machine dimensions (LxWxH): 3210x1750x1750 mm Machine total weight: 5300 kg

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: Rcsdpfx Agexr Rbyj Ash - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2001, CNC LATHE Brand DMG GILDEMEISTER, model CTX 400 TWIN, year of manufacture 2001, HEIDENHAIN CNC-Pilot control, Twin spindle, SAUTER turret, C-axis, hollow clamping cylinder (connection for bar feeder), Hydraulic unit, chip conveyor, documentation, Rjdsxrz N Iopfx Ag Asch

Condition: good (used), Year of construction: 2006, operating hours: 32,400 h, functionality: fully functional, Internal Ref. No.: 25084 CNC Lathe Gildemeister CTX400 Year of manufacture: 2006 Approx. 32,000 operating hours Control: Siemens 840D Powerline + Wedge bar chuck SMW HG-F-210-60-3 Technical data: Spindle speed: up to 4000 rpm Bar capacity: 63 mm (chuck 60 mm) 8-station turret Tool holder: VDI30 Tailstock taper: MK4 Turning diameter: 400 mm Diameter over cross slide: 270 mm Turning length: 650 mm Dimensions (LxWxH): 250 x 200 x 170 cm Weight: 2800 kg Rodpfx Aoxrgkkeg Aech

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 422 mm, turning length: 750 mm, turning diameter: 422 mm, spindle bore: 76 mm, rotational speed (max.): 3,500 rpm, total height: 1,900 mm, total length: 4,480 mm, total width: 1,863 mm, turning diameter over bed slide: 765 mm, overall weight: 5,400 kg, Model: Puma 2600 Control: Fanuc i Series Year: 2010 Max Swing:765mm Turning Dia.: 422mm Turning Length: 750mm Spindle Speeds: 3500 RPM Spindle Bore: 76mm With: 300mm Power Chuck Swarf Conveyor Dimensions: 4480 x 1863 x 1900 Rjdpfx Ajxrfadjg Ajch Weight: 5400 Kgs

Condition: used, Year of construction: 2008, HWACHEON HI-TECH 300 LATHE CNC FANUC 18i – TB MANUAL GUIDE i STEADY REST BRAND MORARI MOD. SLZ – 1517 WORKABLE BAR DIAMETER IN STEADY REST MIN. 15 mm – MAX. 170 mm SWING OVER BED: 600 mm MAX. TURNING DIAMETER: 380 mm SPINDLE MOUNT: ASA 8 “ CHUCK DIAMETER: 315 mm MAX. TURNING LENGTH: 1,200 mm TRAVELS: X: 280 mm Z: 1,270 mm SPINDLE SPEED: 3,200 RPM BAR CAPACITY: 79 mm TURRET: 12 POSITIONS YEAR: 2008 CHIP CONVEYOR Rcsdpfx Aexq Rrpsg Aoh COMPLETE DOCUMENTATION

Condition: used, Year of construction: 2016, Operating hours: 29,800 h Control: Siemens 840D Technical data: Centre distance: 1,000 mm Swing over bed: 430 mm Swing over cross slide: 220 mm Rcjdsxqp Ezspfx Ag Aeh Bed width: 350 mm Turning tool cross-section (height x width): 20 x 20 mm Spindle nose in accordance with DIN 55027: Size 6 Spindle diameter at front bearing: 110 mm Spindle bore: 80 mm Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1 - 3,600 rpm Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 7 m/min Quill diameter: 70 mm Quill stroke: 150 mm Quill taper (internal): MK 5 Dimensions (LxWxH), approx.: 2,800 x 2,100 x 1,900 mm Weight, approx.: 3,300 kg

Condition: used, control SIEMENS SINUMERIC 840C x-axis 235 mm z-axis 270 mm x2-axis 235 mm z2-axis 680 mm hollow 65 mm max. turning speeds 4.000 min/-1 number of tool places 2 x 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Rodpfxjxqhqie Ag Asch Technical Features & Accessories: - IEMCA TAL 65 AUTO bar loader - Various fixed and driven tool holders - C-axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Rcodjxqd D Sjpfx Ag Aoh Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC Lathe Westekemper Type West Turn 1740 NC Rodpfx Agsxqbbue Asch Year of manufacture 2009 CNC control FAGOR 8055 CNC Swing over bed: 400 mm Swing over cross slide: 235 mm Centre distance: 1000 mm Spindle bore: 86 mm Spindle speeds: 10 – 2000 rpm Drive: 7.5 kW Tailstock: MK 5 Tailstock quill travel: 160 mm Lots of accessories Price: €5,500 plus VAT ex location

Condition: used, Year of construction: 1997, turning diameter 420 mm turning length 400 mm spindle tunring speed 5.000 U/min power capacity 44 kW bar material dia. 60 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Rodpjxp R Etsfx Ag Ajch Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, turning diameter 220 mm turning length 310 mm control Siemens 810 D powerline turning diameter over bed 430 mm hollow 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Pos. total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - C-axis - Documentation Rsdjxp R Easpfx Ag Ajch - Backup - EMCO LM 800 bar loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2019, Model: Alpha 1460 XS Year: 2019 Swing Over Bed: 460mm Swing Over Cross Slide: 270mm Swing In Gap: 730mm Distance Between Centres: 1500mm Spindle Speeds: To 2200 RPM (Variable) Rjdpfxjxphv Ne Ag Aech Spindle Bore: 78mm Machine With: 300mm 3 Jaw Chuck 8 Station Indexing Turret (VDI 30) Various Tooling

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, First installation in 2023 Controller OPS-P300LA control system Swing diameter: 450 mm Center distance: 500 mm Max. turning diameter: 230 mm X-axis: 165 mm Z-axis: 470 mm Number of turrets: 1 Rodpsxpfn Asfx Ag Aech Turret design: V12 Tool positions: 12 Driven tools: none Max. cutter cross-section: 25 x 25 mm Max. drill diameter: 32 mm Speed ​​range: 45–5000 rpm Spindle bore diameter: 62 mm Tailstock: yes Parts catcher: yes Prepared for bar feeder magazine: yes The machine is barely used and available for immediate purchase. Live in Hungary.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rcedpexn I Sbjfx Ag Aoh Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Spindle bore: 73 mm MACHINE DETAILS Control model: ELTRO MPULS

Condition: used, Year of construction: 1999, CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Rcsdoxnnm Sjpfx Ag Aoh Equipped with 1 Bar Feeder type DH 65 Equipped with 1 chip conveyor Weight: approx 2,5 T

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3078451, turning diameter over cross slide: 368 mm, turning length: 750 mm, spindle bore: 102 mm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 30 W, total height: 1,900 mm, total length: 3,800 mm, total width: 2,000 mm, Working length 750 mm Swing over bed 760 mm Swing over cross slide 368 mm Spindle speeds 2.400 rpm Spindle bore 117/102 mm Number of tools 12 pcs X-axis travel 287 mm Z-axis travel 864 mm Rcedpfjxmu Rnjx Ag Ajh Main motor power 30 Kw

Condition: used, Year of construction: 1991, Lathe Mori Seiki SL 35 MC Rodpfx Aexmf T Hjg Aech

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Rsdoxgrymjpfx Ag Ajch Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Come with automatic line. Rcsdoxf Iamepfx Ag Aeh

Condition: used, Year of construction: 2002, Max. diameter 430 mm Max. length 600 mm Max. spindle speeds 4000 rpm Rcsdpfxoxfcbfj Ag Aoh Max. spindle speed on live tools 4000 rpm X/Z travel - 310/605 mm 2 x 12 station turrets Control: Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16220C164110, MACHINE DETAILS Operating voltage: 400 V Power: 98 kVA Rated current: 198 A Three-phase current: 400 V Rcjdpexfaxbofx Ag Aeh Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2006, operating hours: 6,650 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized, slant-bed numerically controlled lathe equipped with a tailstock, C-axis spindle, and a 12-position powered turret with VDI 40 tooling interface. The configuration also includes a tool presetter, chip conveyor, programmable tailstock body, hydraulic 3-jaw chuck 250mm BB, and fixed toolholders. Main features: Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar diameter: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Rcjdpfjxdvarjx Ag Aeh Year of manufacture: 2006, with only 6,650 spindle hours, CE compliant machine.

Condition: ready for operation (used), spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Harrison M450 Centre Lathe 60" Between Centres Rcsdexdt Uyepfx Ag Ajh Spindle Speeds 40-2000rpm 12" 4 Jaw Chuck 10" 3 Jaw Chuck Fixed Steady Travelling Steady Coolant P{ump & System