WMT Wilhelm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 030381, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: FANUC, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe - Operating voltage: 3 x 400 V Gsdpfjx Hwkgex Ag Deuk - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 030180, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe Guedox Hwh Sjpfx Ag Dsk - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Godpjx Htf Hefx Ag Djuk Technical specifications: Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 180 mm, turning length: 180 mm, turning diameter: 180 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, overall weight: 6,000 kg, CNC LATHE GTS-150 For sale GTS-150 CNC lathe, a compact yet powerful machine suitable for precise and efficient turning operations. Thanks to its rigid construction, high spindle speed, and reliable FANUC control, this machine is an excellent choice for versatile workshop and subcontracting use. Technical specifications: Godjx Hr Slepfx Ag Djuk Max. turning diameter: Ø180 mm Max. turning length: 180 mm Max. swing over cover: 180 mm Chuck size: 6″ Bar capacity: Ø42 mm Spindle bore: Ø51 mm Spindle speed range: 60–6000 rpm Spindle motor: 5.5 / 7.5 kW Spindle bearing diameter: Ø80 mm Spindle nose: A2-5 X1 / X2 travel: 155 mm Z1 travel: 180 mm Z2 travel: 500 mm Controller: FANUC 18i-TB Hydraulic / coolant tank capacity: 50 / 140 L Machine dimensions (L × W × H): 2.4 × 1.7 × 1.8 m Machine weight: approx. 6000 kg General: Rigid and stable construction High-speed spindle with precise motion control Suitable for both single-piece and series production Excellent choice for subcontracting and precision machining Machine comes with IEMCA bar feeder Ask quote including transporation. Verify all specifications with the seller.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm Godpfex Hpyyox Ag Djuk control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine has 8 position turret with 6 pos. live tooling. Machine has VDI 20. Machine is with tailstock !

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter over tool turret: 70 mm Travel X: 352 mm Travel Z: 250 mm Tool stations: 8 Bar capacity: 42 mm Max. spindle speed: 5,000 rpm Guedpfxjx E Uzmj Ag Djk MACHINE DETAILS Control: Fanuc Series 0i Mate-TD EQUIPMENT Power chuck D135 mm Collet chuck 173E Parts catcher Chip conveyor

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced Guodpfx Aex E Um Nsg Dsk The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1310370, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 18 m/min, total height: 2,200 mm, total length: 1,500 mm, total width: 1,500 mm, overall weight: 2,000 kg, bar diameter (max.): 35 mm, controller manufacturer: FANUC, controller model: SERIES oi-TD, bar diameter (min.): 26 mm, TAKAMAZ XL-100 CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Connected load: 23 kVA - Chuck size: 6 inches - Max. swing diameter over bed: 320 mm - Max. bar diameter: 26/35 mm Gedpfxex E T Tzs Ag Douk - Spindle bearing diameter: 75 mm - 12-position turret - Max. X-axis travel: 120 mm - Max. Z-axis travel: 280 mm Note: The item must be collected definitively between 04 and 12 March 2026 on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX 8F Control (1996) Godpjx E Tppjfx Ag Dsuk Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1996, Traub TNC 42 CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 14 Station ATC, Model TNC 42/65DGY, Collet Chuck, Swarf Conveyor. S/No. 413 (1996), IEMCA Type CNC Boss 542/32 Barfeed. S/No. 97012709 (1997) Driven Tooling Gujdpjx E Tmhsfx Ag Dsk Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1996, Traub Type TNC 30 DGY CNC Lathe with Traub System TX8F Control, Twin Spindle, Twin Turret, (2) x 12 Station ATC, Swarf Conveyor, Collet Chuck. S/No. 475 (1996), IEMCA CNC Boss 542 Barfeed. S/No. 97011301 (1997) Driven Tooling Gsdpfx Aox E Tivsg Deuk Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2018, Traub TNX 65 Sliding Head Machine with Traub System TX8i-S Control, Collet Chuck, FMB Turbo 5 - 65 Barfeed, Swarf Conveyor, Filtration System, Driven Tooling. S/No. 7060582 (2018) Gsdpfx Agsx E Th Eo Djuk Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Index ABC Lathe with IRCO ILS MUK 7012-II Bar Loader, including Knoll coolant system, chip conveyor, and extraction unit Year of manufacture Index ABC: 2017 Year of manufacture Knoll coolant system: 2017 Year of manufacture Knoll chip conveyor: 2017 IRCO ILS MUK-II bar loader: 2015 Control: Fanuc Series 32i-Model B Condition: used Availability: immediately Price: negotiable Technical data: Spindle bore: Ø42 mm Number of turrets: 2 (1 upper, 1 lower) Fixed tool holders: 3 Number of tool positions on lower turret: 6 Number of driven tool positions on lower turret: 0 Number of tool positions on upper turret: 8 Number of driven tool positions on upper turret: 8 Weight: Index ABC including coolant system and extraction approx. 3,500 kg Space requirements: Machine approx. 2.83 m (L) x 1.5 m (W) x 2.2 m (H) Gsdpfjx E Spnox Ag Deuk Chip conveyor approx. 1.6 m (L) x 1.25 m (W) x 1.78 m (H) Bar loader approx. 1.8 m (L) x 1.0 m (W) x 1.28 m (H) Complete machine with Breuning IRCO ILS MUK 7012-II bar loader, coolant system, chip conveyor, and extraction unit. Power supply Index ABC: 400V/50Hz Current Index ABC: 63A Rated power Index ABC: 37 kW Connected load Index ABC: 44 kVA Power supply IRCO ILS: 400V/50Hz Rated power IRCO ILS: 1 kW Accessories: Chip conveyor and chip container Complete machine documentation (operating manuals, circuit diagrams) Additional technical data available on request.

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Gsdpsx E Inmjfx Ag Deuk Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: repair required (used), Year of construction: 1999, functionality: not functional, Not functional machine, needs to repair or for spare parts. Spindle boring 65 mm Max. working length 120 mm 2 x head Number of tools: 2 x 8 Spindle revolutions 5.000 rpm Machine dimensions: 7560 x 1645 x 1765 mm Machine weight ca. 5000 kg Gjdpfxex Ew Hfj Ag Deuk Siemens Sinumerik 840C, oposite spindle, 2 heads, driving tools Bar feeder 3000 mm, chip conveyor, tool holders

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. Gujdpex Edz Tsfx Ag Djk CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Year of construction: 2007, condition: good (used), Manufacturer: Gildemeister• Model: CTX 310• Year: 2007• Control hours: 21,803 h• Spindle hours: 3,299 h• Spindle overhaul: Spring 2025 (approx. 100 h)• Control: Heidenhain Plus iT• Origin: Germany• Availability: immediate• Delivery basis: ex works Technical details• Turning diameter: 210 mm• Turning length: 455 mm• Center height: 190 mm• Swing over bed: 330 mm• Swing over slide: 260 mm• Spindle speed: 6,000 rpm• C-axis: 0.001°• Travels X/Z: 185 / 455 mm• Turret: 12 tools VDI 30• Driven tools: 6• Tailstock travel: 400 mm• Machine weight: 4 t• Space required: 8.0 × 2.2 × 2.0 m Guedpfox Dit Eox Ag Djk Accessories• Documentation• Chip conveyor• Tailstock• Coolant system• C-axis• Driven tool stations• Various toolholders• SMW Autoblock 3-jaw chuck

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, For sale: INDEX ABC CNC automatic lathe from 2001. The machine is in good working order, ready for operation, and ideal for mass production and precision machining. Year of manufacture: 2001 Model: INDEX ABC MODEL: ABC Gedpfxox Difno Ag Djuk Application: Turning Machine type: Horizontal lathe Control unit brand: INDEX Control unit model: C 200-4 Machine weight: 2500 kg

Condition: like new (used), Year of construction: 2006, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, spindle motor power: 15 W, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Godpfxsx Dbxgo Ag Dsuk Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: good (used), Year of construction: 2007, functionality: fully functional, Machine parameters: Travel in Z-axis: 165 mm Travel in X-axis: 150 mm Max. spindle speed: 100-6000 rpm Machine dimensions (L x W x H): 1200 x 1000 x 150 mm Machine weight: 1058 kg Gusdpfxox Apquo Ag Dok

Condition: good (used), Nakamura-Tome TW-20 CNC Twin Turret Lathe With Fanuc CNC Control & Iemca TAL/AUTO 65/38 Automatic Bar Feeder Kitagawa HOH-60K Ø160mm 3-Jaw Power Chuck. (1) Ø140mm Collet Holder, Max 4,500 rpm. Maximum Turning Approx Ø290mm. Maximum Turning Length Approx 190mm. Bar Capacity Ø51mm. Driven Tool Speed Approx 5,000rpm. (2) 12-Station Turrets. S/No. W21206. Iemca TAL/Auto 65/38 Automatic Ø65mm x 3 Metre Capacity Bar Feeder with Control. Gjdpex Ah Rgefx Ag Dsuk With: Transformer, Frederick Crowther 'Cromar 6028' Swarf Conveyor, Swarf Bin, (2) Foot Switches, Coolant System, Tool Presetting Arm & Parts Catcher. This lot also includes Mobile Parts Table with Round, Hexagon, Plain & Serrated Collets Plus Bar Feeder Spares. Power Supply: 415 Volt 3-Phase.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, General Control: Fanuc 31i-B5 Chuck diameter: 160 mm Turning length: 150 mm Workpiece diameter: max. 100 mm Workpiece length: max. 150 mm Travel X: 650 mm Travel Z: 375 mm Spindle Power: max. 15.4 kW Torque: max. 7 Nm Speed: max. 6,000 rpm Tool turret: 12 stations Mounting: BMT55 Rapid traverse X/Z: 60/30 m/min AGW speed: 6,000 rpm AGW torque: max. 23.7 Nm Automation Technology: Perimeter-type workpiece storage Workpiece height (incl. workpiece pallet): max. 150 mm Workpiece weight: max. 5 kg Workpiece handling: Via spindle (pick-up) Equipment Chip disposal: Chip conveyor Coolant supply: High-pressure coolant, 15 bar Workpiece measurement: Measuring probe Gujdpfx Ajx Ahbxjg Dsk Emulsion mist separator: Mechanical Clamping cylinder: Hydraulic full clamping cylinder

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 192 mm, turning diameter: 165 mm, travel distance X-axis: 195 mm, Equipment: bar feeder, TECHNICAL DETAILS Max. turning length: 192 mm Max. turning diameter: 165 mm X-axis travel: 195 mm Gusdpox Afzijfx Ag Djk EQUIPMENT Bar feeder

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Godpfx Agjx Afvgs Dsuk

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,832 h, functionality: fully functional, turning length: 135 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 42 mm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 135 mm Maximum bar diameter: 42 mm Spindle speed: max. 5,000 rpm Spindle bearing diameter: 85 mm Power: 7.5 kW Tailstock / Turret Boring bar holder: 25 mm Travel X-axis: 162.5 mm Travel Z-axis: 450 mm Travel Y-axis: ±30 mm Travel A-axis: 475 mm Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse A-axis: 30 m/min Driven tools Tool magazine positions: 12 Max. speed driven tools: 4,000 rpm Guedjxz Audjpfx Ag Dok Drilling capacity (diameter): 13 mm Milling capacity (diameter): 13 mm Tapping: M4 – M8 Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB Dimensions & Weight Dimensions (L × W × H): 2,950 × 2,015 × 2,000 mm Machine weight: 6,700 kg Axes: 8 Simultaneously controlled axes: 4 Operating hours Power on time: 51,408 h Operating time: 17,832 h Piece counter: 670,941 pcs EQUIPMENT 2 turrets Sub-spindle Bar feeder IEMCA BOSS 545E Chip conveyor 5 driven tools 9 standard tools