M-Technology

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Control OSP U10 M Fpslhccqjyi Hv Njqsc total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Foljyi Eg Hjhccqqopc Machine Benefits Technical Machine Benefits • Spindle nose to table top: 145-685 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1033618, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, torque: 600 Nm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,800 mm, total length: 2,900 mm, total width: 2,600 mm, table width: 500 mm, table length: 700 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,871 h, number of slots in tool magazine: 24, mount diameter: 40 mm, tool weight: 6,000 g, MIKRON VCE 600 PRO CNC vertical machining center - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Power connection: 16 kW - Tool holder: ISO 40 - Spindle motor power: 12 kW - Torque at 100%: 600 Nm - Tool change time: 6 sec - Chip-to-chip time: 8 sec - Number of slots: 5 Fpolhjyiznajccqqoc - Slot spacing: 100 mm Note: Without the tool holders shown in the photos! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Felhccqjyipwijqjpc Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 2,038 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, Very low hour meter reading – approx. 2,038 h. FANUC system. The machine was originally purchased for demonstration purposes at a training center and was subsequently used occasionally by a tool shop. Felhccqoyin Sloqepc The machine is in excellent condition and fully operational – testing under power is possible.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, Mazak Variaxis 500-5X five-axis machining centre with twin pallet system, equipped with Mazatrol 640M 5X CNC control. Pallet dimensions: 500 mm x 500 mm (50 mm pitch). Spindle speeds up to 12,000 rpm. High-pressure coolant through spindle. Travels: X axis: 510 mm, Y axis: 510 mm, Z axis: 460 mm. Five-axis machining centre with twin pallets, Mazatrol PC Fusion 640M CNC control, 40-position tool changer, BT40 taper, 12,000 rpm spindle, TSC (Through-Spindle Coolant), spindle probe, automatic tool setter probe, chip conveyor, 3 automatic operations, 1,539 automatic tool changes. Options include: EIA, spiral interpolation, EIA 3D compensation, rotation, geometry scaling, external data I/O, high-speed processing, form compensation, threading. Inverse time, Auto TLM, Comparison Stop, spline interpolation, G54.1, Sync.tap, G00 Slope Const, Variable 600 sets, Navigation, Smart Card Operation, EIA helical tapping cycle, Mazatrol Helical, Protocol B, Mazatrol co-ordinate offset, Mazatrol planetary tapping, automatic pecking, Ethernet operation. Fpjlhccqoyigk Rsqjc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 810D Poweline, table width: 560 mm, table length: 790 mm, overall weight: 3,850 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,650 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Well-maintained DMG 635V Ecoline machining center with only approximately 2,650 spindle hours. Year of manufacture: 2013 Travel paths: X: 635 mm Fpsljyigf Uehccqqec Y: 510 mm Z: 460 mm Equipment: Control: Siemens 810D Powerline electric handwheel chip conveyor coolant system electrical cabinet cooling tool changer: 20 positions spindle speed: 8,000 rpm spindle taper: SK40 Machine available immediately! Machine can be inspected under power! Transport can be organized upon request!

Condition: good (used), Year of construction: 2018, Machine from educational institute with 200 spindle hours Quaser MV 134 C Year of manufacture: 2018, Control: Fanuc Oi - MF, Travel X/Y/Z: 650/570/560 mm, Spindle speed up to 12,000 rpm, Taper: SK 40, Tool changer with 30 positions, Table size: 940 x 500 mm, Max. table load: 500 kg, High-pressure coolant through spindle (IKZ) / unused Chip conveyor, Rapid traverse 36 m/min, Folhccqsyh U U Ieqepc

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, 3 axis CNC Machining Centre HURCO type VM10-24i PLUS CTS Year of construction: July 2024 - AS NEW - less than 100 working hours Travel X: 660 mm Travel Y: 406 mm Travel Z: 508 mm Numerical Command WinMax 5: double touch screen 19'' / Detachable electronic crank / USB ports Spindle: SA40, cooling by thermal fluid Spindle speed: 12 000 RPM Integrated tool coolant (CTS) Table size: 762 x 406 mm - 3 T-slots 18H7 - Loading capacity: 1500 kg Tool changer: 24 positions, automatic electric arm changer Foloyh Nz Aehccqqopc Spindle motor: 11,2 kW at 1450 RPM Max couple: 73,6 Nm Rapid advances: 28 m/min. on X, Y and Z Standard Functions: Ultimotion / rigid threading / helical interpolation / trochoidal machining / import STL /WinMax programmation Fanuc ISO + conversational Installed software options: Ultimonitor ESF (supervison Ethernet) Materials and tools Bookcase Files player DXF 2D/3D, SPLINE and STEP

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 600 kg, total height: 2,500 mm, total length: 3,000 mm, total width: 2,300 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 8,000 rpm, overall weight: 3,900 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK40, number of slots in tool magazine: 20, Equipment: chip conveyor, We offer a DMG MORI DMC 635 V TNC530 vertical machining center in very good condition, year of manufacture 2008. Manufacturer: DMG MORI Model: DMC 635 V TNC530 Year of manufacture: 2008 Condition: very good CNC Vertical Machining Center DMG DMC 635 V TNC530 with Heidenhain control The machine has undergone a thorough inspection, the spindle has been overhauled with bearing replacement and taper grinding. New X-axis covers. In excellent technical condition. Technical specifications: Travel range (X/Y/Z): 635/510/460 mm Working area (travels): X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Spindle: Speed range: 20 – 8,000 rpm Spindle taper: SK40 Worktable: Dimensions: 790 x 560 mm Maximum load: 600 kg Tool magazine: Capacity: 20 tools Feed rates: Rapid traverse (X/Y/Z): 25 m/min Fpelhceyhzrmscqqoc Control: Heidenhain iTNC 530 Dimensions and weight: Weight: approx. 3,900 kg Dimensions: approx. 3.0 m x 2.3 m x 2.5 m The machine can be inspected and tested at our company site. If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2011, operating hours: 67,500 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, controller model: 840D SL, spindle speed (max.): 12,000 rpm, 5-Axis Machining Center with Pallet Changer Manufacturer: DMG Model Series: DMC-60U DuoBlock Year of Manufacture: 2011 Control System: Siemens 840D SL Power-On Hours: approx. 77,500 h Spindle Hours: approx. 51,000 h Felhcjyhp T Uocqqepc S/N: 11700XXXXX Country of Origin: Germany Technical Data: ----- - Travel X-Y-Z: 600 x 700 x 600 mm - Table size: 630 x 500 mm x2 - Rotary table: 360° - Spindle: 20-12,000 rpm, 28 kW, 40% duty cycle - Tool holder: HSK-A63 - Tool magazine: 60 stations - Coolant system (980 l) including paper band filter - ICS: 40 bar - Air blast through spindle - 3D workpiece probe - Tool breakage monitoring (mechanical) - 3D Quickset - 3D machining and transmit function - Operating mode 4 - 3D machine data model - Central lubrication - Chip conveyor - Weight: approx. 10.5 t Accessories: ----- - Manuals - Rinsing gun - Handwheel Remarks: ----- - Maintenance history available, many parts replaced in the last five years.

Condition: good (used), Year of construction: 2016, HURCO VM10i vertical machining center, 3-axis Year: 2016 MAX 5 control, 2 × 19" LCD color displays (text + graphics) TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table 762 x 406 mm Table load max: 682 kg T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose – table: 102 – 610 mm Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: SK40 Rapid traverse X,Y,Z-axis: 24 m/min Tool magazin: 20 positions Tool diameter max: 89 mm Tool length max: 250 mm Tool weight max: 7 kg Weight: 3000 kg Accessories/options: - Cooling flood through spindle with ICS (20 bar) - High-pressure cooling flood system - Spindle cooler - Chip auger - Software options as per photos Under power in our warehouse! Fpelhccqjyhb N Isqec

Condition: used, Year of construction: 2007, Fanuc Robodrill Alpha T21iEL 5-axis machine Year of manufacture: 2007 Control: Fanuc 31i Manual Guide Axis travels: -X: 700 mm Fpslhcoyg Hl Escqqec -Y: 400 mm -Z: 330 mm -C: 360 degrees -B axis 4th and 5th axis: Tsudakoma TN130 rotary table Spindle: max. 24,000 rpm Spindle taper: BT30 Tool magazine: 21 positions -documentation -coolant tank with pump

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1540501589A, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table width: 540 mm, table length: 850 mm, spindle speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 3, Equipment: documentation/manual, High Speed Spindle (18,000 RPM), Tool Standard is CAT-40, Felhcceyg Dt Toqqspc Attached Accessories: 30 pieces of tool holders, Tool Presetter

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: Fanuc O-MD, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, 3 Axis Good condition Fpjlhsyg Dizsccqqec excellent maintained Previously worked in Switzerland BT-40

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: 828D + Shopmill, total height: 2,460 mm, total length: 1,900 mm, total width: 2,160 mm, table width: 450 mm, table length: 800 mm, table load: 450 kg, overall weight: 3,400 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 630 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Including equipment such as: Robust roller guides on all axes, spindle cooling system (oil cooling), fast double-arm tool changer with preselection and vertical magazine with 24 tool stations, hinge-belt chip conveyor, coolant through the spindle with 20 bar high-pressure pump, air blast through the spindle, coolant gun, movable electronic handwheel. Fslheyglp Asccqqspc

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: CMXV1241149, Fully functional, only 2200 hours. Inspection is available at any time. Feel free to contact, will send you full specification for this machine. Was used at our production, no repairs at all. All paperwork in hands, machine is ready for export. Fpslsygdbqjhccqqsc

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm Fslhcceyf Hymjqqopc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1539000771E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, workpiece weight (max.): 1,000 kg, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,039 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2012 Fpjlhcjyf E Shocqqsc - Condition: good, used - Control: Siemens 840D SL - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm

Condition: new, Year of construction: 2025, operating hours: 671 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain TNC7, workpiece weight (max.): 1,100 kg, table width: 800 mm, table length: 616 mm, rotational speed (min.): 20 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain TNC7 Spindle HSK-A63 16,000 rpm 30 tool positions Rigid clamping table 800x616 Internal coolant supply 40 bar with paper band filter Scraper belt conveyor Handwheel BLUM LC53-Digilog for tool breakage detection/measurement Touch probe BLUM TC Machine ON: 671 h Spindle ON: 61 h Machine is approx. 6 months old. Offered for sale on behalf of customer. Inspection possible by prior arrangement. Folhccjyf E Ateqqopc

Condition: used, Year of construction: 2008, Palletized Machining Center LEADWELL FMC - 560 CNC FANUC 0i - MC Year of first installation: 2008 Table dimensions: 580 mm x 410 mm Travel: X: 560 mm Y: 420 mm Z: 490 mm Spindle speed: 10,000 rpm Fsleyft Ikjhccqqjpc Spindle power: 11 kW Tool magazine: 24 positions Chip conveyor Machine weight: 4,500 kg Complete with full documentation

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: X.0112.6528, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, controller manufacturer: Siemens, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 1,200 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering you a highly precise and highly productive machine! The machine is located at our facility in Rotenburg an der Fulda and can be inspected under power at any time. Commissioning at our facility was carried out in 2023 by the machine manufacturer. Currently, the machine is scheduled out of production because the intended product is no longer being manufactured. The machine is being sold without clamping devices and without tools. Tool holding system: HSK 63 The spindles can be adjusted independently in X, Y and Z, which greatly enhances the flexibility and accuracy of the workpieces being machined. Folhccqjyfm Tyjqepc All axes are equipped with linear drives, enabling very short processing times. The pallet changer allows you to change workpieces parallel to the machining time. Expansion by a robot cell for automatic loading of the system is possible. Very good overall condition.

Condition: excellent (used), Year of construction: 2004, CNC Machining Center DECKEL MAHO DMC 64 V 2004 Heidenhain iTNC 530 Technical data: X-axis: 640 mm Y-axis: 600 mm Z-axis: 500 mm Table size: 800 x 600 mm Workpiece weight: max. 600 kg Spindle: SK 40 Fsleydl Hpjhccqqspc 12000 rpm

Condition: excellent (used), Year of construction: 2004, Machine type: - Kondia B640 - Year of manufacture: 2004 Control: - Heidenhain iTNC 530 - Electronic handwheel Tool measurement: - Tool Eye - 3D probe Tool changer: - 22 magazine stations Travel paths: - X - 600mm, Y - 400mm, Z - 510mm Main spindle: - max. 12,000 rpm (new main spindle in 2020) - Tool holder: BT 40 Table: Fslhcoydlyiecqqspc - Clamping surface: 800 x 400mm Coolant: - Through-spindle coolant (IKZ) 20 bar - External coolant supply - Spindle cooling Equipment: - Chip conveyor - Various tool holders - Various clamping pins - Machine documentation Availability: - Immediate

Condition: excellent (used), Please read the technical specifications carefully. If you are considering this machine as an investment, we kindly ask that you submit your complete credentials with a correct phone number and email address in order to receive an offer. DMG Machining Center – CNC Milling Machine Model DMC 635 V Year of manufacture: 2009 Control system: SIEMENS 840 D Power-on hours: 7,445 h Spindle hours: 1,366 h!!! Travel range X/Y/Z: 635 x 510 x 460 mm Spindle speed: 20 – 10,000 rpm AC Main drive: 13/19 kW (40/100% duty cycle) Tool holder: SK 40 DIN 69871 Tool clamping: DIN 69872 Tool changer: 20 positions, double-arm gripper Max. tool weight: approx. 6 kg Tool change time: approx. 1.6 sec. Chip-to-chip time: approx. 6.0 sec. Rapid traverse: 30 m/min Feed rate: max. 30,000 mm/min Feed force: max. 5 kN Table size: 560 x 790 mm Number of T-slots: 4 + 1 T-slot pitch: 100 mm T-slot width: 4 x 14 H12 / 1 x 14 H7 Maximum workpiece weight: 600 kg Distance spindle nose to table: 120 – 580 mm Felhjyc U E Sjccqqopc Machine weight: approx. 4,500 kg Inclusive: - 3D control unit SIEMENS 840 D Solutionline with operating interface - ShopMill Open, DMG ERGOLine-Control; 19" display - External coolant/air blast switch via M-function - Rinsing gun for chip removal - Electronic handwheel - Machine mounts - Integrated machine light Vice shown not included Specifications subject to verification, no warranty given. Tool package available at extra cost. Specification available from stock from March. Condition: As new, with only 1,366 spindle hours from a vocational training center.