Ambrosi

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Kdodpoy Twkmefx Aa Djl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR Kdsdpfx Aoy Twkaja Del SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical Details Measuring range X-axis: 300 mm Measuring range Y-axis: 250 mm Measuring range Z-axis: 600 mm Tool diameter: mm Table size: mm Control: Weight: 700 kg Machine dimensions: 2600 x 1400 x 1900 mm Coolant tank: 800 x 600 x 920 mm Additional information Combined setting, shrinking, and measuring device, induction coil with tailstock and cooling system CNC control Software: Saturn 1 Zoller Multivision II Automatic length stop system in the Z-axis for setting and shrinking to the target dimension Cooling system with water for cooling times of max. 40 seconds Kdedpjy Twi Ajfx Aa Del Setting to the target dimension, shrinking, and inspection measurement for one tool in max. 2 minutes, including cooling Without tool holders (attachment holders). On May 30, 2022, the machine was inspected by a technician from ZOLLER. Shrinking is currently not possible. The induction coil and drive unit would need to be replaced. The purchase price of a comparable new machine (including software) from ZOLLER is approximately EUR 100,000.00, with a current delivery time of approx. 52 weeks!

Condition: ready for operation (used), Year of construction: 2016, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control Kodjy Twhxspfx Aa Dsdl • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: ready for operation (used), machine/vehicle number: YS2P6X20009207888, mileage: 362,192 km, first registration: 05/2016, fuel type: diesel, empty load weight: 14,181 kg, overall weight: 26,000 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 9,300 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, electric window regulation, onboard computer, retarder, tachograph, Dear Sir/Madam, The subject of this advertisement is a Scania P320 truck with a FAUN refuse collection body. VIN: YS2P6X20009207888 First registration date: 18/05/2016 EURO 6 Mileage: 362,192 km Power: 235 kW Engine capacity: 9291 cm3 Fuel: diesel Drive: 6x2 Gearbox: Scania automatic Suspension: leaf spring and pneumatic GVWR: 26,000 kg Payload: 11,819 kg Curb weight: 14,181 kg Body: FAUN VR5 LEV Factory number: 80299-2 Capacity: 18.5 m3 Dimensions: Length: 9.3 m Width: 2.5 m Kdjdpfx Aajy Twhfo Dsl Height: 3.4 m Equipment: ABS Differential lock Central lubrication system Electric windows Electric, heated mirrors Hydraulic power steering Engine brake Hydraulics Immobilizer Retarder On-board computer Manual air conditioning Rear view camera Fog lights Sun visor Speed limiter Radio Adjustable suspension Reversing signal LED lights Rotating lights Tachograph Cruise control Multi-function steering wheel Dual rear wheels Lane departure warning system We offer: Vehicle service after purchase Maintenance and repairs for equipment purchased from us Transportation to any location worldwide Upon your request, we will perform: Filter and oil changes in the vehicle Filter and oil changes in the body Additional service: As a leader in the Central European market, specializing in the sale of municipal vehicles and equipment, we would like to offer you the opportunity to benefit from our many years of experience in this field and sell your surplus municipal equipment through us. On your behalf, we will take care of: - Contact with the customer in several foreign languages - Preparation of sales and after-sales documentation - Organization of road and sea transport - Organization of customs documentation (customs clearance, Eur 1, T1) - Preparation of the vehicle for sale Leasing options are available for older vehicles, even those up to 18 years old. If you would like to know more, please contact us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING Kdodjy Twg Uspfx Aa Djl RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm Kodpfjy Twg Isx Aa Dsdl - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 160 t, stroke length: 150 mm, overall weight: 19,000 kg, Equipment: CE marking, Single-point hydraulic knuckle press, complete with accessories. Uncoiler, straightener, feeder, and safety guards. Manufactured by HANIL KNUCKLE PRESS CO LTD, South Korea – 2018. Model HKCA-160. Pressing force: 1600 kN. Maximum pressing point (R.T.P.): 4.0 mm before the lower dead center. Slider stroke: 180 mm. Working speed: 80 strokes/minute. Maximum die height: 450 mm. Slider adjustment: 100 mm. Work table: 1300 x 700 mm x 14 mm thick. Working slider: 900 x 600 mm. Air pressure: 5 bar. Kdodoy Twgzepfx Aa Dol Dimensions (Width x Length x Height): 2100 x 1800 x 3450 mm. Weight: 19 tons. Main motor: 15 kW.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127094, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, total height: 2,000 mm, total length: 7,200 mm, total width: 2,000 mm, overall weight: 7,000 kg, spindle nose: JIS A2-S, controller manufacturer: OKUMA, controller model: OSP-P 200 L, operating hours of spindle: 5,000 h, number of slots in tool magazine: 12, OKUMA LB 300-M CNC lathe - Turning diameter over bed: 530 mm - Turning diameter over cross slide: 530 mm - Turning diameter over tool rest: 420 mm - Distance between centers: 1020 mm - Spindle bore: 100 mm - Feed range Z-axis: 0.001 to 1000 mm/min - Rapid traverse Z-axis: 25,000 mm/min Kdodpjy Twghofx Aa Djl - Feed range X-axis: 0.001 to 1000 mm/min - Rapid traverse X-axis: 20,000 mm/min - Speed range of driven tools: 45 to 4500 rpm (infinitely adjustable) - C-axis adjustment: 360° - Rapid traverse of the C-axis: 200 rpm - Diameter of the tailstock: 90 mm - Including the tools located on the turret, two foot switches, operating manual (if available) - With chip conveyor and bar feeder SAMSYS, type: MULTI-3000 Note: the item must be collected between July 14th and 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, MANUFACTURED IN 2015 MS MACHINE (THERMOSTABILIZED) FIXED TABLE TRAVEL: X 350, Y 250, Z 220, U 350, V 250 MM MAXIMUM TAPER: 30°/220 MM Kedpfx Aoy Twf Rea Dsdl LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Kdjdpey Twfwofx Aa Dol Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data Kdsdpey Twfqsfx Aa Djl 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, IVECO Trakker Tway 540, Construction vehicle, New, 540 hp, Automatic transmission, Retarder-intarder, Towing capacity, Power take-off, Radio/navigation system, Sun visor, Differential lock, Electrically heated mirrors, Euro 6, Air-suspended driver's seat, Air conditioning, Leaf spring suspension, Fully equipped, complete with EMILCAMION S5 tipper body with a round container, 8 mm Hardox steel bed, 6 mm Hardox steel sideboards, Hydraulic tailgate with gull-wing design, Marcolin cover and uncover system with remote control. Kdjdpfx Ajy Twfkja Djl

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,502 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details. Kdodpfx Aajy Twd Te Djl - Travel X-Axis: 1000 mm- Travel Y-Axis: 500 mm- Travel Z-Axis: 500 mm- Rapid Traverse: 20 m/min- Spindle Speed: 8000 rpm - Tool Capacity: 24 slots- CNC Control: Heidenhain iTNC 530- TE Electronic Unit Type: TE 520B- Control On Hours: 17849 h- Machine On Hours: 11292 h- Program Run Hours: 2726 h- Spindle Run Time: 2502 h- Total Power Installed: 37 kW- Year of Manufacture: 2011- Machine Weight: 6000 kg- Voltage / Frequency: 400 V / 50 Hz- Air Pressure: 6 bar- Scope of Delivery: touch probe

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-travel 2800 mm y-travel 2200 mm z-travel 800 mm Control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 12000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Kdjdpfxey Twdmj Aa Dol Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: good (used), mileage: 58,895 km, power: 121 kW (164.51 HP), first registration: 10/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 105 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,850 mm, total width: 2,090 mm, total height: 2,400 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, central locking, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Co-driver's bench seat - Euro 6 emission standard - Driver airbag - Remote-controlled central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Front center armrest - Rain sensor - Engine immobilizer - Partition = Additional Information = General Information Number of doors: 2 Cab: single Registration number: V-78-PLN Technical Information Kodoy Twdgopfx Aa Djdl Number of cylinders: 4 Engine displacement: 2,299 cc Front axle: Max. axle load: 1850 kg; Steered Rear axle: Twin tires; Max. axle load: 2800 kg Weights Unladen weight: 2,570 kg Payload: 930 kg GVW: 3,500 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 01/2027 Technical condition: good Optical condition: good

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm Kdodpjy Twc Nsfx Aa Djl • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 246,900 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 14,100 kg, overall weight: 32,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 8x4, wheelbase: 4,300 mm, energy efficiency: C, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, Equipment: ABS, AdBlue, EBS, cruise control, differential lock, navigation system, traction control, Urea tank (AdBlue) Engine displacement: 12,809 cc Hydraulics (auxiliary drive) Low noise Euro 6 C Payload: 17,900 kg Short-haul cab Automatic climate control Dautel (brand name, likely referring to a specific type of equipment) Tie-down rings Foldable underrun protection Sun visor Rotating beacon Kdjdpfsy Twc Aex Aa Djl Cooler box VIN: 10194736 Errors and omissions excepted.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 141643, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: MAZAK, controller model: MAZATROL M PLUS, total height: 2,250 mm, total length: 4,400 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,460 mm, table load: 500 kg, overall weight: 6,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 8,000 g, Equipment: chip conveyor, MAZAK VTC-20 B Vertical Machining Center - Tool holder: SK 40 - Max. distance from the spindle face to the clamping surface: 690 mm - Cutting feed rate X/Y/Z: 1 - 5000 mm/min - Max. tool diameter: 80 mm with an occupied adjacent position - Max. tool diameter with a free adjacent position: up to 110 mm Kdjdpfxsy Twcvj Aa Djl - Incl. chip conveyor MAYFRAN - Incl. the tool holders located on the tool changer - Note: the machine vise clamped on the table is not included in the scope of delivery! Note: the item must be collected between July 14th and July 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 29092021, T-503 PAPER SLITTER REWINDER MACHINE GENERAL INFORMATIONS: Machine weight : ≈ 2000 kg Number of Knives : 12 Units Ksdpfxey Twcie Aa Djdl Bobbin Loading Stand : Yes Air Shafts : Yes Tension Control System : Yes Brake System : Yes Speed Control System : Yes Trucker motor power : 5,5 KW Top rewind motor power: 7,5 KW Bottom rewind motor power : 7,5 KW Unwind: 1250mm Rewinder: 920 mm Width: 1200 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WPC, YEAR OF MANUFACTURE 2012 Kdsdpey Twccefx Aa Djl EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVELS X 600 Y 450 Z 450 B +45º/-120º C n x 360º SPINDLE 20,000 RPM, 36 KW, HSK-A63 (NEW) SCALES ON X, Y, Z 220-TOOL CHANGER 7-PALLET CHANGER DYNAFIX 280 x 280 MM TOOL MEASUREMENT PROBE PART MEASUREMENT PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), mileage: 192,337 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, fuel: diesel, color: white, Year of construction: 2021, operating hours: 889 h, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, General information Model year: 2021 Registration number: 321560 Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Drive: Wheel Battery: 12 V Weights Empty weight: 3.184 kg Carrying capacity: 316 kg GVW: 3.500 kg Functional Mast: sliding Mast length: 10 m Lifting capacity: 120 kg Lift height: 1.250 cm Clearance lift height: 200 cm Environment Emission class: Euro 6d Condition Technical condition: very good Visual appearance: very good Product safety Manufacturer: France Elevateur FR Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - 230V power connection - Climate control - DAB Radio - Electric folding mirrors - Flashing lights - Heated door mirrors - Immobilizer - Inverter 12/230V - Keyless Go - Lane assist - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - PTO - Radio/Cd/Audio system - Reversing camera - Roof rack - Roofracks - Side Door Right = Remarks = Kdedpfxey Twb Sj Aa Del Video of working vehicle: Mercedes Sprinter 316 CDI year 2021 2.1 CDI Rear-wheel drive Aerial work platform France Elevateur Working height 12.5 m Category N1 GVW 3500 KG Manual transmission Remote control present 230V inverter present 889 operating hours Tow bar present 2,000 KG towing capacity Air conditioning Cruise control 192,000 KM verifiable

Condition: new, Year of construction: 2026, Modern and compact gatekeeper / security cabin in high-quality insulated design, delivered directly from the manufacturer VASG Composites. --- ### Technical Data * External dimensions: 1.50 m x 1.50 m x 2.40 m * Internal height: 2.35 m * Design: Monoblock, fully assembled delivery --- ### Insulation * Wall insulation: 50 mm PUR (polyurethane) * Roof insulation: 50 mm PUR (polyurethane) --- ### Floor Construction * 14 mm fiber cement board * PVC floor covering * Available in wood-look or anthracite pattern --- Kdjdpsy Twb Esfx Aa Djl ### Equipment * 1 entrance door with half-glazed thermal window * PVC door frame in white * 2 insulated glazed windows: * 1 fixed window * 1 sliding / guillotine window (openable) * PVC window frames in white --- ### Color * Exterior facade and steel frame: * RAL 7016 Anthracite Grey --- ### Electrical Installation * Surface-mounted electrical installation * 1 socket outlet * Light switch * Fuse box * Residual current device (RCD / FI protection) * 32A / 5-pin external power connection (plug) * LED ceiling light --- Manufacturing location and shipping: Direct delivery from VASG LTD Turkey to your address Invoice: VASG KFT Hungary --- ### Additional Features * Lifting hooks on the roof for easy loading and relocation --- ### Optional Equipment * Forklift pockets * Foldable indoor table * Additional guillotine window * Additional fixed window * Roller shutter per window (white) * Door in anthracite * Window frames in anthracite (per piece) * Roller shutters in anthracite (per piece) --- ### Ideal for: * Gatekeeper cabin * Security cabin * Cashier booth / container * Reception container * Porter container --- Europe-wide delivery available. Please send us the delivery address for a quotation including transport. VAT is not included.

Year of construction: 2017, condition: excellent (used), Aerzen GM50 blower unit + 90kW motor Aerzen GM50L, serial number 1579396, 89.90kW, 55.16 m3/min, year 2017, 340kg Siemens 1LC4 283-2AB60-Z motor, 90kW, serial number 08653001IM B3, 2975 rpm, 540kg Kdedpfx Aajy Twbxo Djl

Condition: new, functionality: fully functional, first registration: 12/2024, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, fog lights, onboard computer, sliding door, soot filter, traction control, Fiat Doblò 1.5, 130 hp New, unused vehicle (0 km) Tekno package Available for immediate delivery Kodpfx Aasy Twbro Dodl €18,000.00 + VAT