Motec CNC-Technik GmbH

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 12/2008 Control system: FANUC Series 31i-Model A5 Spindle taper: BT30 Tool magazine: 21 positions Machine weight: 2,100 kg Power supply: 3-phase, 200/220 V, 50/60 Hz Power consumption: 10 kVA CE marking: yes Country of origin: Japan Travel and working ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Max. spindle speed: up to 24,000 rpm (as per nameplate) Max. table load: 300 kg Included accessories Lredpfx Aszgvwioiion The machine includes approximately 50 collets of various sizes. The rotary table / 4th axis located in the machine is not included in the sale.

Condition: used, Year of construction: 2001, machine/vehicle number: 010614780, Serial No. 010614780, travel range X/Y/Z/B/C 680 x 400 x 625 mm +65 - -110 x 360 °, 2 pallet tables, workpiece clamping device, bridge, swiveling, 40-position pallet storage, workpiece setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, 240-position tool changer, coolant system, chip container, setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, chip tank, 240-position pallet changer, coolant system, chip container. Lrjdozgvnhopfx Aiijn

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 400 mm Travel range Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool holder: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Measuring probe Tool measurement Chip conveyor Rotoclear viewing window Temperature monitoring Handling system 3R Ledpfezgt U Esx Aiiorn

Condition: used, Year of construction: 2002, x-travel 500 mm Lodpfozgimkox Aiiorn y-travel 500 mm z-travel 500 mm weight of the machine ca. 3800 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 94,204 h, travel distance X-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 8,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, number of axes: 5, This 5-axis CHIRON FZ 15K S was manufactured in 2001. It features a spindle speed of 12,000 rpm and a tool magazine with 48 positions, providing efficient machining capabilities. The machine is equipped with a Peiseler swivel rotary table and an internal through-spindle cooling system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15K S vertical machining centre we have for sale. Contact us for further details. Lrjdpfxezggb Ee Aiien - Number of Axes: 5-axis (3+2 configuration)- Axis Table: Peiseler swivel rotary table equipped with HSK 100 clamping / LANG clamping system- Cooling: Internal through-spindle cooling system (IKZ)- Chip Management: Chip conveyor system- Workpiece Measuring: Renishaw probe- Working Voltage: 400 V- Control Voltage: 230 / 24 V- Power Rating: 47 kVA- Rated Current: 67 A- Fuse: 80 A Technical Specification Taper Size HSK 100 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2009, Haas Super Mini Mill 2 vertical machining center Year: 2009 Technical data: X-Axis 406 mm Y-Axis 305 mm Z-Axis 254 mm Table size 914 x 305 mm Max. Load on table 227 kgs. Spindle taper SK40 Spindle speed 10000 RPM Spindle motor 11.2 kW Ljdpezf Ilpsfx Aiisrn Tool changer 24 station automatic Tool changer Feed rate all axes 21.2 m/min Rapid traverse feed rate all axes 30.5 m/min Accessories/options: - Control CNC Control Haas, electronic Handwheel - Accessories HRT 160 rotary table - WIPS - Coolant Standard Coolant equipment Haas, capacity 151 ltrs.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 12,000 rpm, General Refurbished Machine: Manufacturer-tested for functionality Control System: Heidenhain iTNC530 Travel in X: 550 mm Travel in Y: 400 mm Travel in Z: 425 mm Rapid Traverse Rate X/Y/Z: 60 m/min Spindle Speed: 12,000 rpm Power: 28 kW Torque: 180 Nm Tool Holder: SK40 Tool Changer: 20 stations NC Rotary Table Type: 2-axis swivel unit Rotary Table Diameter: 280 mm Lrodpezf Ia Tjfx Aiion Accessories Chip Management: Chip conveyor - scraper belt Workpiece Measurement: Blum measuring probe TS230 Coolant Supply: Coolant system, 30 bar

Condition: ready for operation (used), Year of construction: 2001, operating hours: 28,585 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 9,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2001. It features a maximum spindle speed of 9,000 RPM and an impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a turret with 16 positions and a round axis diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T vertical machining centre we have for sale. Contact us for further details. Ledpfx Aiozf Ag Ioiern • Round axis: dia 700 x 500 • Turning of the table: 360 deg • Swing zone: deg • Positions in turret: 16 Technical Specification Taper Size SK 40

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Lsdpszf Admsfx Aiiern Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: excellent (used), Year of construction: 1998, Control system: Fanuc OM Travel ranges X/Y/Z: 450 x 300 x 400 mm Table size: 600 x 300 mm Spindle speed: 8,000 rpm Ljdpfx Aiszfx Syoisrn Tool magazine for 16 tools, SK 30.

Condition: used, Year of construction: 2015, CNC machining center Manufacturer: Chiron Type: FZ 12 W Magnum Year of construction: 2015 CNC control: Siemens 840D solution line Travel distances: X/Y/Z = 550 x 400 x 360 mm Lodpfszfppcox Aiiorn Spindle: 15,000 rpm Tool holder: HSK63 Internal coolant supply Rotary table Integrated workpiece changer 32-tool capacity Glass scales Chip conveyor Laser control for break detection 23626

Condition: used, Year of construction: 1985, This Chiron CNC vertical machining center, type: FZ16L CN, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. Lsdozfid Hepfx Aiisrn You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Lrodpfxozd Dfij Aiien

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) Lodpozdvmxjfx Aiisrn - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS Lrsdpfx Ajzdvmroiion - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank Lrodpfozdvmlox Aiion * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle Ledpfx Aiozdvmfeiern - Chips conveyor : GAUCHE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] Ljdpfx Aiezdvl Ueijrn - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp Lsdpfxozdvl Ij Aiisrn - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, Year of construction: 2001, x-travel 600 mm Lrodpfezdvglox Aiijn y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t

Condition: new, Year of construction: 2026, MILL 400 Machining Center The MILL 400 Machining Center is an advanced vertical CNC machining center designed for precision metalworking in industrial environments. Thanks to modern technologies, high-quality components, and the professional Siemens Sinumerik 808D control system, the machine delivers reliability, high precision, and excellent productivity, making it an ideal solution for small and medium-sized manufacturing companies, prototype workshops, and industries involved in machining complex components. Key Advantages Massive machine frame ensuring rigidity and stability, eliminating vibrations during machining and enabling exceptional precision. Precision linear guideways on all axes, guaranteeing outstanding repeatability and motion accuracy. Fully enclosed working area, providing operator safety and minimizing the risk of contamination and chip dispersion. High-quality ball screws on the X, Y, and Z axes, ensuring minimal backlash and maximum machining precision. SIEMENS servo drives delivering reliability and efficiency, enabling smooth and accurate axis movement. Design and Technology 8,000 rpm spindle, ideal for machining steel, aluminum, and other engineering materials. 10-position tool magazine enabling automatic tool changes, increasing productivity and reducing downtime. Automatic lubrication system, extending machine life and reducing maintenance requirements. Pneumatic system supporting guarding systems, clamping devices, and safety functions. Siemens 808D operator panel, offering an intuitive interface and complete real-time machine control. Precision and Performance Positioning accuracy: ±0.02 mm Positioning repeatability: ±0.01 mm Rapid traverse rates: 10 / 10 / 8 m/min Feed rate: 2.6–2500 mm/min X/Y/Z axis servo torque: 6 / 6 / 7.7 Nm Technical Specifications Parameter Value Table Size 800 × 280 mm Spindle Taper BT30 (BT40 optional) X-Axis Travel 404 mm Y-Axis Travel 284 mm Z-Axis Travel 451 mm Distance from Spindle Nose to Table Surface 500 mm Rapid Traverse Rates 10 / 10 / 8 m/min Feed Rate 2000 mm/min X/Y/Z Axis Servo Torque 4.7 / 4.7 / 7.7 Nm Positioning Accuracy ±0.02 mm Ljdpfx Aiszdp Eueijrn Repeatability ±0.01 mm Maximum Spindle Speed 8,000 rpm Tool Magazine Capacity 12 tools (16-tool option available) Motor Power 2.2 kW Control System Siemens SINUMERIK 808D Machine Weight 1,300 kg Machine Dimensions 2000 × 1800 × 2400 mm Standard Equipment SIEMENS SINUMERIK 808 Advanced control system SIEMENS servo drives 8,000 rpm spindle 12-position automatic tool magazine Fully enclosed machine guarding Automatic lubrication system Pneumatic system LED work light Three-color status/alarm tower light Lathe chuck and tailstock

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Ljdpszdklpsfx Aiiern Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. Lsdpfszdkhqox Aiisrn The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details. - Control System: Siemens CNC- Spindle Taper/Chuck: SK40- Spindle Speed Range: 320 – 10,500 rpm- Tool Magazine Capacity: 2 × 12 slots (24 tools total)- Tool Change Time: approx. 1.9 s- Chip-to-Chip Time: approx. 3.9 s- Retrofit/Overhaul Date: 2021 - Complete modernization: • main spindles overhauled • ball screws replaced • tool changer overhauled, • axis systems/guides/bearings overhauled • hydraulic/pneumatic systems updated • electrical system and cabling modernized • safety elements replaced Lredpfjzcyh Eox Aiisn • geometry adjusted- Cooling System: Internal cooling (IKZ) via Knoll paper band filter and high-pressure unit (Unit Number: 646)- Chip Management: Integrated chip conveyor and swarf bin- Workholding: Hydraulic workpiece clamping on a 180-degree workpiece changing table (W-axis)- Additional Features: Prepared for 4th/5th axis integration, attached cabinet climate control unit

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We are selling a beautiful and well-maintained machining center from Fehlmann, a Picomax 60-M HSC. Machine data: Manufacturer: FEHLMANN Machine type: PICOMAX® 60-M Machine number: 14508674 Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Operating hours: 12,799 Spindle hours: 5,303 Technical details: Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Spindle speed: 50 - 20,000 rpm Number of tool positions in the tool magazine: 24 Tool holder: SK30 Ljdpszcqtrjfx Aiijrn Dimensions and weight: 2.0 m × 1.7 m × 3.0 m // 3350 kg Accessories for the machine: - Renishaw touch probe system OMP 40-2 with spindle adapter - Cold air nozzle for M-function, switchable - Direct path measurement system with compressed air supply - Thermal compensation - Compensation of spindle and thermal expansion - Ethernet interface - Laser system NT incl. blow-off nozzles for tool measurement and breakage check - 4th/5th axis FEHLMANN ATS 160 CNC automatic indexing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert - Tools in the lower cabinet - Transport securing - Operating and programming manual (also for optional equipment) Software options: - HSC-SETUP cycle (axis optimization) - Potential equalization milling spindle - Alignment cycle for automatic alignment of the ATS - Engraving of uppercase and lowercase letters and special characters - Rotary table machining (in mm/min) - Fast 3D machining, 5-axis interpolation, spline interpolation - Extended energy-saving function and warm-up spindle + axes