Seizmeier GmbH & Co. KG

Condition: used, Year of construction: 2024, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HHS knives Knife changing tool 6 months Polar warranty on parts (excluding labor - from date of installation) Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Lolhcowu Dkpocqrohh Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, STC-Ref:G-071-2401 Polar 92-EMC ,Year: 1985 format: 0x920 mm equipped: - safety light beam - rear table guard - datastore for programmes - side table - airtable - 1 spare knives Leljwuvycjhccqrshh --> available: 07/2025

Condition: used, Format: 780 mm Lhelhccowut Drjqreh Equipment: display Air table program

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: Lholhcewuthwjcqroh - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: good (used), Paper cutting guillotine Ideal 4305 Ideal 4305 is a basic guillotine for cutting paper in A3 format. It is ideally suited as cutting equipment in small printing, digital printing points, photographic studios, offices, etc. Full manual operation makes the device reliable and easy to use. Low purchase and operating costs make this device ideal for companies with low-volume production. The guillotine has a lever sheet pressure, cutting length adjustment with reading on the strip and manual knife drive. It allows you to cut, for example, a stack of 500 sheets of paper (70 g / m) or a 40 mm thick brochure. Additional advantages include easy replacement of the knife and backing strips (strips). The device also has a safety cover and an effective lock against accidental use. Specification: – solid metal construction – manual knife beam drive – lever paper pressure – transparent safety cover on the cutting field – SCS system (Safe Cutting System) – manual saddle feed – reading the cutting position on the strip – high-quality hardened steel knife Lelhccqewunlqershh – safe knife replacement kit – machine equipped with a base Technical data: Cutting length 430 mm Infeed height 40 mm Infeed depth 435 mm Front table depth 230 mm End cutting 34 mm Weight 54 kg Dimensions (width x depth x height) 880 x 880 x 1090 mm (with base)

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. Lhelhccqowunldorjh The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: good (used), Paper cutting guillotine Ideal 4860 The machine is 100% functional, after inspection in very good condition. This is the currently produced model, the latest model. Technical data: working width: 475mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 450mm Lelhccqjwunk Herehh 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Paper cutting guillotine Ideal 6660 The machine is 100% functional, after inspection like new. This is currently produced, the newest model. A spare knife included. Technical data: working width: 650mm stack height: 80mm minimum remnant: 25mm max. distance of the saddle from the knife: 610mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Lslhccqswud R Norjhh Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2014. Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Weight 1400kg Enlarged side tables. Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools. Lhjlhccewt Stcjqroh

Condition: good (used), Paper cutting guillotine QZYK 1370 DH-1520 The machine is fully functional, in perfect condition. After inspection, ready to work. Year of production 2022. This is the highest quality copy of the Polar Mohr guillotine. Technical data: Cutting width: 1370mm Stack height: 165mm Programmer with color display Lelhccqewt Sr Sorshh Air table Photocells Chrome table surface Ball screw drive of the rear comb Optical cutting line Enlarged side tables with aeration Weight: 4200kg 380V power supply The set includes documentation, a set of tools, a tapping block, a spare knife and one in the machine.

Condition: good (used), Paper cutting guillotine Ideal 4850-95 EP Machine in very good condition. Not used in production. Technical data: working width: 475mm stack height: 80mm minimum remnant: 35mm max distance of saddle from knife: 450mm 230V power supply Basic features: The machine has an EP programmer with the function of moving to a given dimension and saving individual steps to the device’s memory. Lhjlhcswt Srlscqreh After calling the program, the machine moves to the given and next step from memory. electromechanical knife, clamp and saddle drive automatic clamp synchronized with the knife cutting movement electronically controlled saddle adjustment knob with adjustable travel speed transparent covers on the front and rear tables two-handed cutting start, electronically controlled automatic knife return from any position optical cutting indicator Additional equipment: tapping block, cutting stick, knife replacement tools, documentation.

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface Lhslhcewt Sq Uscqrjh – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: good (used), Year of construction: 2023, Multifinisher cutting, creasing and perforating machine FKS/Multigraf TOUCHLINE CPC375 XPRO with folding machine FKS/Multigraf TOUCHLINE TF375 XPRO Lholowtqq Hjhccqreh We kindly request your binding offer Technical data: • Multifinisher FKS/Multigraf TOUCHLINE CPC375 XPRO - Double sheet detection - Barcode reader - Negative creasing tool - S&L creasing bar (negative) - Perforating tool (rotary) - Stack feeder • Folding machine FKS/Multigraf TOUCHLINE TF375 XPRO - Vacuum alignment section • 2x complete perforator head, 11 TPI, CP375; CP375DUO • Downholder Guide 2 up complete Available from: immediately Delivery conditions: ex works – EXW Wiehl Payment terms: Payment before collection Accessories without guarantee. Applies: "Item purchased as seen." The potential buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2002, Polar 78 ES paper cutting machine With large side tables with air blower Includes tools and spare knife. Lelhcjwtnwwocqrshh

Condition: good (used), Year of construction: 1995, Cutting machine Ideal 3915-95 including spare blade and tools, cutting width 39 cm Lholhjwtilcjccqrsh

Condition: used, Year of construction: 2003, The Polar 115 ED, manufactured in 2003, is a robust and well-maintained machine with a serial number of 7331088 and a size of 1150 mm. Currently dismantled and located in Germany, this machine is in good condition and has been directly sourced from production, ensuring its reliability and performance. Lhslhcjwtg Axscqrsh This model comes with a comprehensive set of equipment designed to optimize workflow and efficiency. Included is a Polar RA-4 jogger and a Polar TR90EL paper collecting station. The setup is arranged in an efficient L-shape, which enhances operational workflow. The required floor space for this setup is approximately 3,500 x 4,500 mm, making it suitable for medium to large-scale print finishing operations. The Polar 115 ED is known for its heavy-duty industrial build quality, characteristic of Polar machines. It features a complete cutting system that includes both the jogger and the collecting station, making it ready for immediate use in demanding print environments. Format: 1150 mm Equipment: Condition: Good and well-maintained ??? directly from production Equipment Included: - Jogger: Polar RA-4 - Paper Collecting Station: Polar TR90EL - Setup in efficient L-shape for optimized workflow - Required floor space (L x W): approx. 3,500 x 4,500 mm - Perfect for medium to large-scale print finishing operations Special Features: - Heavy-duty industrial machine with reliable Polar build quality - Complete cutting system including jogger and collecting station - Ready for immediate use

Condition: used, Year of construction: 2003, The Schneider SENATOR 115 SC, manufactured in 2003, is a high-quality machine with a serial number of 11-41-002-01/20-03 and a size of 1150 mm. Currently dismantled and located in Germany, this machine is designed for precision and efficiency. Lelhcowtg Arscqrohh The SENATOR 115 SC comes equipped with a program for automated operations, ensuring ease of use and consistent performance. It features photocells for accurate detection and control, enhancing its operational capabilities. Additionally, the machine includes an air table for efficient material handling, making it a reliable choice for various industrial applications. Format: 1150 mm Equipment: Program Photocells Air table

Condition: used, Year of construction: 1982, The Polar 115 EMC, manufactured in 1982, is a robust machine with a serial number of 5232596 and a size of 1150 mm. Currently dismantled and located in Germany, this machine offers several notable features. Equipped with a program for automated operations, the Polar 115 EMC includes an air table for efficient material handling. Additionally, it is fitted with photo cells for precise detection and control, enhancing its overall functionality and performance. Format: 1150 mm Equipment: Program Air table Lhjlhccewtg Aloqrjh Photo cells

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, cutting width (max.): 1,680 mm, Equipment: safety light barrier, Cutting line Perfecta Year: 2013, little used Bigger, faster, more efficient: With a cutting width of 168 (66"), the Perfecta high-speed cutters have no problems processing large formats. Consisting of: Pallet loader Perfecta/Baumann BASA 7 Paper jogger Rear loading system Perfecta 168 TS guillotine cutter - 3 color monitors with touchscreen: Cuttronic - Automatic adjustment - Cutting table, side tables and stacker continuously corrosion-free with air cushion - Protection by photo cells - Number of knives: total 6 Unloading system Perfecta BA 6, on the left side of the guillotine cutter This robust cutting line from 2013 is in very good condition and still in production. Inspection possible by arrangement. Available immediately as a complete unit: - BASA 7 pallet feeder - vibrating table - with ZTS 2750 gripper transport system automatically to the rear table of the 168 guillotine cutter - BA6 stacker. This cutting line is suitable for medium to large print runs for continuous, fast, and precise cutting. It is equipped with corrosion-free stainless steel surfaces on the cutting and side tables, a powerful blower for the air cushion system, stop angle correction, and hold-down device. Lhelhcowr Dgxjcqrsh

Condition: excellent (used), Year of construction: 2016, High-Speed Cutter - 18,5“ color display - touch screen operation Lhelhcjwrwy Secqreh

Condition: excellent (used), Equipment: safety light barrier, IDEAL 5222 Digicut with side tables. 520 mm cutting length. Electromechanical knife drive. Hydraulic drive for pressure bar. Infinitely adjustable pressing pressure (min. 200 daN, max. 1100 daN) with display via manometer. Foot pedal for pre-pressing or as a cut indicator. Pressure bar cover. Electrically operated backgauge with professional program control. Electronic handwheel with infinitely variable speed for fine manual backgauge adjustment. Optical cutting indicator with bright red LEDs. Pressure bar guided on both sides for uniform pressing force. Precision backgauge spindle. Adjustable backgauge comb with narrow pitch (32 mm) and plastic gliders. Two lateral stops each on front and rear tables. Solid steel knife carrier and readjustable knife guides. High-quality blade made of premium knife steel. Additional tables (2 pieces) included in the price. Comprehensive SCS safety package: IR safety light barrier in the working area; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut release with repeat lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic knife and pressure bar return from any position; disc brake for immediate blade stop; knife change device with covered blade edge; cutting depth adjustment from outside; easy knife change from the front, without removing any housing parts. Electronic control module for the backgauge: Digital measurement display, dimension indication in cm/inch (display accuracy 1/10 mm). Direct value input via numeric keypad. Memory mode for chain cuts, additional automatic memory. 99 programs each with up to 99 program steps (up to 9 chain dimensions can be saved as one program step). Steps can be easily deleted, inserted, or overwritten. Automatic program run during cutting. Automatic set function for reference measurement. Programmable paper feed (EJECT). Two keys for freely programmable fixed measurements. Machine self-diagnosis with error display on screen. 230 Volt / 325 kg Shipping at buyer's expense possible. Lslhewrrm Teccqrehh 3 months bring-in warranty. Our offers concern used machines, which may show signs of use (minor scratches or yellowing).

Condition: excellent (used), Horizon HT-30 – Three-Knife Trimmer Condition: Very good | Compact semi-automatic for precise trimming For sale is a Horizon HT-30 three-knife trimmer in very good condition. The machine is known for its compact design, easy operation, and precise cutting results – ideal for single or small print runs in digital or offset printing. Technical Data: • Model: Horizon HT-30 • Cutting types: Head, tail, front (three-knife trimming) • Format range: • Max. final format: approx. 310 x 220 mm • Min. final format: approx. 105 x 148 mm • Book thickness: up to approx. 51 mm • Operation: Touchscreen with program memory • Automatic single book feed • Designed for small runs and on-demand production Lholhjwri A Ejccqrsh Features: • Compact footprint – ideal for small production spaces • Short setup times thanks to fully automatic format adjustment • Perfect for digital print finishing • Quiet operation and easy maintenance Condition: Very good, well-maintained condition – fully functional and ready for immediate use.

Condition: used, Year of construction: 1993, Cutting machine POLAR 58 EM Year of manufacture 1993 Lhjlhowrc Tqjccqreh Item no. L1017

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, STC-Ref:G-071-2405 Polar 155-EMC-MON ,Year: 1986 format: 0x1550 mm equipped: - safety light beam Lslhccqewra Ryershh - Air-removing roller - jogging table - pile lift (pile hoist) - rear table guard - datastore for programmes - airtable at right side - monitor - 1 spare knive HSS --> available: 07/2025

Condition: used, Year of construction: 1995, only approx. 621,000 cuts Air table left, air table right Lolhccqjwq Rd Ijrshh 2 spare knives available at short notice