Rudolf Fassbender GmbH & Co KG

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Refurbished BRUDERER Stamping Press BSTA250-75B incl. new PCS-100 Press Control Technical Specifications Pressing force: 250 kN Tool area (L-R x F-B): 750 x 530 mm Adjustable stroke lengths: 13, 16, 19, 25, 32, 38, 44, 47 mm Speeds: 13 mm stroke: 1,500 spm 16 mm stroke: 1,350 spm 19 mm stroke: 1,240 spm 25 mm stroke: 1,075 spm 32 mm stroke: 950 spm 38 mm stroke: 810 spm 44 mm stroke: 700 spm 47 mm stroke: 650 spm Power supply: 76 kVA Kwjdpfxsyb Etqj Ad Net Servo motor rating: 47 kW Shut height: 175.5 - 239 mm (stroke-dependent) Slide adjustment: 51 mm Strip feed width: 210 mm Strip feed height: 50 – 120 mm Additional Information · Completely refurbished eccentric high-speed press · Highly dynamic, adjustable stroke design · Equipped with modern, high-performance modular PCS-100 press control · Energy-efficient drive technology for reduced CO₂ emissions · Industry 4.0 ready via OPC-UA interface · Integrated tool monitoring · Integrated servo feed system

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system will be built according to the customer's requirements (Siemens control). Ksdpex U Ur Refx Ad Nswt

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine has been completely overhauled and finished, including a new press control Siemens S1500/MTP1000. Kjdpfx Ajx U Ucpsd Njwt Column gap: 830 mm Distance table – ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes per minute: 30-120 Delivery time: immediate

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8923, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 650 mm, total width: 3,100 mm, total length: 2,000 mm, pressing force: 320 t, clearance between the columns: 1,530 mm, overall weight: 38,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 320 t, The machine is completely overhauled and finalized. The control system is built according to customer requirements (Siemens control). Distance between uprights: 1530 mm Distance table - ram: 650 mm Kedpfx Asx U Tudsd Nowt Ram adjustment: 100 mm Stroke adjustment: 20 - 160 mm Ram strokes per minute: 30 - 120 Delivery time approx. 3 - 4 months after configuration of the new control system according to customer specifications.

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg Kjdpjx Triwjfx Ad Njwt . . Ongoing purchase of used German machines without NV or CNC control

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Year: 1978 Levelling straightner RASTER 12 180/19.150-1 New 1986 incl. Decoiler  incl. Feeder  Kwodpfx Adsx S H Ilo Njt Capacity Kg: 40000 Table Length:590mm Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: new, functionality: fully functional, Pressure: 125 t Ksdpfx Ajx Sq Hljd Nswt Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Kwsdpfxsx Ex Dxo Ad Not Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Ksdpfsxz Ugxjx Ad Nswt Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Kwedpfx Adsxz Hxaj Nst Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: Kodpfxjxzr Ruo Ad Nowt L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Stroke: 50 mm, Clutch: pneumatic, Power supply: 380 V, Machine weight: 2,200 kg, additional ejector, factory version with reinforced design Kwodpfoxx T Hfox Ad Not

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 Kedpfx Adexwp Nyj Nowt - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Kwodpfx Ajxwk Tgsd Net Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Condition: used, Year of construction: 2000, operating hours: 18,686 h, functionality: fully functional, For details, see the description Kedpjxvx Tlofx Ad Njwt

Condition: good (used), Year of construction: 2018, functionality: fully functional, You will find all details in the exposé. Kwjdpfx Aoxvx R Djd Nst

Condition: good (used), FOR SALE BRUDERER BSTA 50 PRESS Automatic precision press by Bruderer Model: BSTA 50. Max. press force: 500 kN (50 t). Speed range: 100 – 1,200 spm. Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 mm. Equipped with Bruderer BBV 202/120 feed unit. Kedpfjxvri Tox Ad Newt Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feed length: 120 mm.

Condition: used, IMV Punching Press Kodpfexnxlxex Ad Njwt Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Condition: used, ROVETTA Transfer Press Type: S4-15000-5500x2500 Press force: 1,500 t Strokes: 8–24 spm Stroke length: 763 mm Slide adjustment: 400 mm Shut height: 1,200 mm Table area: 5,500 x 2,500 mm Slide area: 5,500 x 2,500 mm Opening between uprights, lateral: 3,400 x 1,900 mm Kwodjxnxlfopfx Ad Not

Condition: ready for operation (used), Year of construction: 1991, pressure 25 t stroke 7 - 62 mm no. of strokes 120-600 Hub/min total power requirement 4 kW Ksdpfjxiy Absx Ad Newt weight of the machine ca. 2,5 t

Condition: used, Year of construction: 1992, pressure 10 t stroke 8-40 mm no. of strokes 120-600 Hub/min ram - range of adjustment 40 mm table surface area 380x240 mm ram surface 220x140 mm hole in the table 220x110 mm table height 910 mm tool hole in ram Ø 30 mm throat 135 mm weight of the machine ca. 1,2 t dimensions of the machine ca. BxTxH 1000x1500x2000 mm Kwodpfx Aoxh Szasd Net

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm Kedpfxsxh Sype Ad Nowt hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: new, Year of construction: 2025, pressure 75 t stroke 8-80 mm no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm Kedpfx Aexh Swuod Newt hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Kjdpfexg Rvaox Ad Njwt Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: used, Year of construction: 2005, functionality: fully functional, OMERA-ROSS 500-R2-M2P8 Eccentric Press Description: Capacity (Tons): 500 Table Size: 2300 x 1400 mm Ram Stroke: 300 mm Minimum Number of Strokes: 12-44 SPM Kodpfx Aoxfk E Esd Nswt Subtype DM Cdc: DM2B CE Marked: Yes Eccentric Drive Linkage System: Knuckle-joint flywheel with screw, eccentric type Ram Width: 2300 x 1300 mm Ram Mounting: 200 mm Number of Pressure Points: 2 Number of Guides: 8 Ram Adjustment System: Guided wedge ball seat Daylight (Slide Opening): 1150 mm Side Window (Between Uprights): 1020 mm Weight: 66 tons (66,000 kg) Foundation Depth: 1000 mm Motor Power: 76 kW Electrical Panel Connections - Operation - Condition - To be overhauled Front/Rear Photocells: Yes Front/Rear Safety Guards: Yes Mechanical/Hydraulic Overload Protection: Yes Accessories / Other data: Compact Feed Line Presses 600x4 Motor Power: 76 kW Table Length: 2300 mm Table Width: 1400 mm Strokes per minute: up to 44 spm Distance between uprights: 1020 mm Total Weight: 66,000 kg