AS Maschinenhandel

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm Godpjz R D Hljfx Akyebu control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: excellent (used), Year of construction: 2015, operating hours: 55,000 h, functionality: fully functional, Equipment: documentation/manual, Type: CNC turning center Manufacturer: INDEX Model: C200 Year of manufacture: 2015 - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: AD140 - Spindle drive power: 25 / 33 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. diameter of the main spindle chuck: 160 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK SPINDLE - Spindle nose: AD140 - Spindle drive power: 25 / 33 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. machining diameter: 160 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 700 [mm] - Rapid traverse speed: 50 [m/min] - Distance between spindle / tailstock spindle: 710 [mm] LEFT UPPER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X/Z: 110 / 320 [mm] - Travel Y: 100 [mm] - Tool type: VDI 25 Gbedpoz R Ad Asfx Akyou - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] RIGHT UPPER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X: 180 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] LEFT LOWER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X/Z: 110 / 550 [mm] - Travel Y: 100 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 64 [kVA] WEIGHT AND DIMENSIONS - Footprint: 6,618 x 1,794 [mm] - Machine height: 2,139 [mm] - Machine weight: 9,000 [kg] MACHINE HOURS - Power-on hours: 59,431 [hours] - Spindle hours: 29,663 [hours] ACCESSORIES - Control: C200-4D (SIEMENS 840D) - Interface: Ethernet / USB - 3-color status indicator - Options: Transmit / Tracyl - Tool breakage detection - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Spindle cooling - Internal coolant supply (ICS): on all turrets - Chip conveyor - Part removal - Part belt conveyor - Bar feeder: INDEX MBL capacity 3,000 [mm] - Collet chuck: 2 HAINBUCH Spanntop Kombi Axfix Ø65 This offer is subject to change and is non-binding. Modifications, errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2004, Max. cutting diameter 366mm, max. cutting length 705mm, bar capacity 80mm, Y Axis +/- 50mm, Gsdpfxsz Rz Exe Akysbu Mori MSX850 -III Control, 0.001 degrees C axis, Spindle speed 4,000rpm, spindle motor power 30Hp, 12 station Turret with 6000rpm milling, Swarf conveyor, Coolant, 3 Jaw Chuck, magazine barfeed.,

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, Gjdpsz Rzzaofx Akyjbu turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret , 22KW Motor, Main spindle 4,000 rpm, sub-spindle 4,500 rpm, 3 jaw chuck, parts catcher, toolsetter,

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar Gbsdpfoz Rzh Hox Akyju • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: like new (used), Year of construction: 2009, operating hours: 1,900 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * IMPORTANT: Never used with a bar loader; only for machining aluminum prototypes. * APPROXIMATE EQUIPMENT VALUE: 34,000 - 36,000 euros. * Machine facing heads. * Center turning and milling with 9 controlled axes. * Twin heads. * Head size A2-6. * 2 Superimposed turrets. * 2 C axes. * One Y-axis turret, upper. * Two integrated 22 Kw motors. * Power of milling motors: 7.5 Kw. * Two Renishaw automatic tool measuring arms. * Mapps conversational automatic programming system 4. * Automatic stress control and tool consumption monitor. * Life management and tool consumption monitor. * Double pedal for opening and closing chucks. * Oil cooler for both heads. * 340 Nm torque. * Both turrets have 16 stations each and are fully motorized. * Option to set up with 32 tools in each turret. * Interface for installing a bar feeder. * Automatic rear part pick-up system with a special clamp for long parts. * Large quantity of indoor and outdoor tool holders. * Large quantity of axial and radial motor blocks. * APPROXIMATE EQUIPMENT VALUE: 34,000 - 36,000 euros. * MQ system for tool clamping. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Main spindle distance - countershaft max.: 1130 mm. * Speed of main spindle: 5,000 rpm. * Speed of countershaft: 5,000 rpm. * Speed of motorized tools: 6,000 rpm. * Bar diameter max.: 65 mm. * Travel X1: 210 mm. * Travel Y1: +-65 mm. * Travel distance Z1: 300 mm. * Travel X2: 210 mm. * Travel Z2: 810 mm. * Countershaft displacement: 920 mm. Gedpfez Rxmyex Akyjbu * Rapid displacement X1, X2: 30,000 mm/min. * Rapid displacement Y1: 20,000 mm/min. * Rapid displacement Z1, Z2: 50,000 mm/min. * Axis resolution C: 0.001°. * Both spindles are equipped with two high-precision chuck holders. * Lateral chip conveyor, hinged type. * Communication ports via USB, PCMCIA card, and RS 232. * Machine weight: 8,300 Kg. * Machine can be inspected while in operation. * Electrical transformer, documentation, parts list, electrical schematics, programming and operations manual. * Immediate delivery time, except in the event of an early sale.

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Gbodpfxez Rt Dtj Akyou Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2025, 2025 Takisawa EX-2000YS Turn Mill Model EX-2000YS Twin Spindle CNC Lathe With Fanuc Series OI-TF Plus Control With Dual Toptek BL-3000 Bar Feeders 2 Power Collet Chucks. Maximum Swing Ø800mm. Standard Turning Ø250mm. Maximum Turning Ø390mm. Maximum Turning Length 510.5mm. Distance Between Centres 787mm. Maximum Bar Capacity Ø65/52mm. Axis Travel 'X'=250mm, 'Y'=±50mm, 'Z'=590mm, 'B'=570mm. Rapid Traverse 'X'=30m/min, 'Y'=10m/min, 'Z'=36m/min, 'B'=36m/min. Maximum Main Spindle Speed 4,500rpm (15/11kW Motor), Maximum Sub Spindle Speed 5,000rpm (15/11kW Motor), Maximum Rotary Tool Spindle Speed 4,000rpm (15/11kW Motor). 12 Position Turret. Turning Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. Run Hours 1,085. Bar Feeder Lengths 4.35m. S/No. CZ02EX2153 (2025). With Coolant System, Chip Conveyor, Foot Switches, Signal Tower & Oil Skimmer. Overall Dimensions L2,600 x W1,932 x H1,800mm. Weight 5,900kg. Please note this asset is located at No. 718, Sec. 2, Yanghu Rd., Sanhu Vil., Yangmei Dist., Taoyuan City 326, Taiwan. Deadline for collection is December 11th 2026. Gjdpfsz Rqm Sex Akyjbu

Condition: used, Year of construction: 2008, 2008 MAZAK QTN-450M-II Nexus CNC Turning Centre with MAZATROL Matix Nexus CNC Control Gbjdoz Rqlbjpfx Akyju Maximum Swing Ø845mm. Maximum Machining Diameter Ø584mm. Distance Between Centres 1,000mm. Axis Travel 'X'=340mm, 'Z'=1,070mm. Maximum Spindle Speed 2,000rpm (37kW Motor). Maximum Rotary Milling Speed 4,000rpm. 12 Position Turret. S/No.201914 (2008) Any Bidder MUST and CAN ONLY USE the Baker Hughes Approved Contractors to Work Onsite. Please see the Essential information tab for more details. With Coolant System, Chip Conveyor, Traveling Steady & Oil Mist Extraction Unit. Weight 13,000kg.

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Doosan S280N, year 2006 Fanuc Oi Mate TB control Godpfx Aez Rpg Djkyobu Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Max. turning diameter: 280mm 10-tool turret Tailstock Parts catcher Chip conveyor with tank and pump Machine documentation

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Gbodpoz Rl Dxefx Akyju Year: 2012 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Godpfx Ajz Ri U Iskyjbu Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Gbjdpfoz N H Enex Akysu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 Gbsdpfx Aez N E Arekyou max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is primarily characterized by its linear motor technology in the X-axis, which, compared to conventional ball screws, ensures extremely high dynamics, rapid positioning, and wear-free operation. Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Control system: -Heidenhain Accessories: Gbjdoz N Etkjpfx Akyeu -Workbench, under-mounted telescopic drawer unit (7 drawers) Contents: Hand tools, analog and digital measuring instruments, indexable cutting inserts.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NL301GL1022, travel distance X-axis: 280 mm, travel distance Z-axis: 1,370 mm, overall weight: 11,500 kg, The Mori Seiki NL3000MC/2000 is a high-precision, robust CNC turning and milling center designed for heavy-duty machining and the processing of long workpieces. The model designation indicates the NL series (class 3000), and the MC version signifies that the machine is equipped with driven tools (milling) and a C-axis for milling operations. Equipment: -Single spindle, three-jaw chuck, 10-station tool turret, chip conveyor Control: -MSX-850 III (NL301GL1082) Special features: Gbjdpfjz N Emwsx Akyeu -BMT technology (Built-in Motor Turret): The tool motor integrated directly into the turret minimizes vibrations and heat generation, resulting in significantly improved milling performance. -High stability: The massive flat-bed design provides excellent damping properties for hard materials and deep cuts. Accessories: -Work bench (1-door, 4 drawers), telescopic drawer cabinet (7 drawers), standing table, shelf Contents: various hand tools, various tool holders, machine accessories

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 615, overall weight: 8,700 kg, The Mori Seiki SL-303 BMC/1500 is a robust, high-precision 3-axis CNC inclined-bed turning and milling center. The model designation indicates a system with driven tools (BMC), C-axis, milling function (MC), and an extended distance between centers of 1500 mm for machining long workpieces (e.g., shafts). Equipment: -Single spindle, three-jaw chuck, automatic tailstock SMW Autoblock, 12-tool turret, automatic steady rest, chip conveyor Control: Gbsdpfx Ajz N Dkbjkyou -MSG-501 (SL303-615) Key Features & Advantages: -Complete machining (Multi-Process): By using driven tools and C-axis control, milling, drilling, and threading operations can be performed directly after turning without re-clamping. -High rigidity: The massive cast iron inclined bed effectively dampens vibrations, which contributes to excellent surface finishes and a long tool life. -Thermal stability: Comprehensive cooling and oil circuits around the spindle minimize thermal expansion during long and heavy roughing operations. Accessories: -Workbench with partition (1 door, 3 drawers), containing: hand tools -Telescopic drawer cabinet (7 drawers), side shelf, containing: various turning tools and tool holders

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM Gjdpfjz N Dfljx Akyjbu MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Godpfx Asz N A Avekyebu Toolholders, Transformer

Condition: good (used), Year of construction: 2013, operating hours: 1,561 h, functionality: fully functional, General Information Description Specification Manufacturer MAZAK Model Quick Turn Smart 200 CNC Control Mazatrol Smart Year of Manufacture 2013 Serial Number 249187 Total Operating Hours 11,755 hours Cutting Hours 1,561 hours Network Connection LAN Condition Very good technical condition, clean, accurate and exceptionally well maintained 2. Machining Capacity & Working Area Description Specification Maximum Swing Diameter 530 mm Maximum Swing Over Cross Slide 343 mm Gsdpfx Aez Nyn Nskyjbu Bar Capacity 65 mm Spindle Bore 76 mm X-Axis Travel 195 mm Z-Axis Travel 560 mm X-Axis Rapid Traverse 30,000 mm/min Z-Axis Rapid Traverse 33,000 mm/min 3. Spindle & Tooling Description Specification Maximum Spindle Speed 5,000 rpm Spindle Motor Power 15 kW Selectable Thread Start Position Yes Through-Tool Coolant Yes Tool Turret 12 stations Turret Indexing Time 0.17 seconds per station Tailstock Automatic, MT5 Tool Measuring Arm Included Parts Catcher Included Robot Interface Additional M-function (1 pair) Smartshift BASE Quick-Change System Included Chuck SMW AUTOBLOK Collet Chuck 4. Integrated Automation – Universal Robots UR5e Collaborative Industrial Robot (Cobot) Description Specification Manufacturer Universal Robots Model UR5e Year of Manufacture January 2021 Robot Type Collaborative Robot (Cobot) Usage Demonstration use only Payload 5 kg Reach 850 mm Repeatability ±0.03 mm Working Envelope 2.6 m³ Maximum TCP Speed 1,000 mm/s Joint Speed 180°/s Robot Weight 21 kg Mounting Options Floor, ceiling, wall or angled mounting Power Supply 100–240 V AC Power Consumption Approx. 200 W Controller UR e-Series Control Box Programming URScript and graphical block programming Safety Standards ISO 10218-1, ISO/TS 15066, PLd Category 3 Fieldbus Communication PROFINET, EtherNet/IP, Modbus TCP Digital I/O 16 inputs / 16 outputs Analog I/O 2 inputs / 2 outputs Tool Flange ISO 9409-1-50-4-M6 5. Robot Integration with Mazak Smart 200 The UR5e robot is fully integrated with the Mazak Quick Turn Smart 200, providing a complete automated machining solution. - Smartshift BASE quick-change coupling system - Additional M-function for robot interface - Pre-programmed automation sequences - Quick switching between manual and robotic operation - Video available showing the robot and machine operating together - Fully tested and used in production - Complete robot and machine integration 6. Machine Condition The machine is reported to be in excellent technical and operational condition. - Fully operational and functioning correctly - No active alarms or critical faults - Smooth movement on all axes - Spindle runs smoothly without abnormal vibrations - Linear guides and ball screws in good condition - Hydraulic and pneumatic systems functioning normally - Regular in-house maintenance performed - Lubrication system operating correctly - Primarily used for light machining of aluminium and plastic components - Robot and CNC machine fully integrated and tested 7. Documentation Available - Machine photographs - Video of machine operation - Complete machine manuals - Electrical diagrams

Condition: ready for operation (used), functionality: fully functional, Biglia 510 2T lathe with hydraulic spindle and automatic tool changer turret, designed for fitting production. Gedpfez Nwmcjx Akyobu Included with the machine is a second chip conveyor and spare drive components for the numerical control, previously removed from an identical machine.

Condition: used, Year of construction: 2007, Gildemeister CTX 520 linear CNC turning machine Gildemeister Type/Model: CTX 520 linear Condition: Used Year of manufacture: 2007 Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis guide: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Gbjdpfxjz Ng R Ds Akysu Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Spindle speed range: 4500 rpm Tailstock Tailstock stroke: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill stroke: 120 mm Coolant system Capacity: 250 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx.: 10 t + 0.65 t Dimensions approx.: 6000 x 3050 x 2270 Equipment - Chip conveyor Inquiry item: Transport costs will be provided in an individual offer.

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Gjdpfez Ndu Ejx Akyjbu Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 665 mm turning dia. over face-slide: 530 mm turning length: 750 mm max. turning diameter: 395 mm longitudinal traverse (z-axis): 500 mm facing movement (x-axis): 600 mm control: TX8H spindle passage: 80 mm revolution per minute: 60 -12.000 U/min tool turret - number of stations: 24+1 operating hours - idle run: 26466 h operating pressure: 6 bar diameter of quill: 85 mm quill stroke: 140 mm Gsdpfxoz Ndq Ts Akyebu tool taper: ISO 40 total power requirement: 36 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 4,8 x 3,5 x 2,8 m The TRAUB TNA 400 is a high-performance CNC turning machine designed for the precise complete machining of turned parts. Equipped with the proven TRAUB TX8H control system, the machine is suitable for both single-part and series production. It features a hydraulic chuck, tailstock, and a fully enclosed working area with a coolant system. Its robust design ensures high precision and reliable process stability in continuous industrial operation. Equipment: ·TX8H CNC control ·Swivel table ·Central lubrication system ·Coolant system ·Spindle cooling ·Spindle air blow function ·Working area lighting ·Chip flushing nozzles ·Electronic handwheel ·Leveling elements ·Signal tower light ·Manual wash gun ·Macro programming ·NAVI-MILL workshop programming ·Programming cycles ·Program runtime calculation ·Parts counter ·Intelligent handwheel ·Tool magazine with 24 + 1 tool positions *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. Gbedoz Nc Svspfx Akyou * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.