IproMac e.K.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale is a MAFAC Elba as a two-bath cleaning system, year 2019 with approx. 2500 cleaning cycles, in very good condition. Features: - Rotating hot air impulse blowing - Stationary hot air drying system - Main flow fine filtration MT 1 - Main flow fine filtration MT 2 - Basket rotation speed control - Control cabinet top light Gijlhswyc Sieccqrew - Leveling set - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-norm baskets: 600 L x 400 W x 288 H mm

Condition: used, Year of construction: 2002, Functionality: fully functional, Mafac Elba, year 2002, temperature 75°C, tank capacity 775 l Gelhccoww E Ihsqrsiw

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Gelhccjwty H Doqroiw Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2018, IBS Parts Cleaning Device Type W-250 Heatable device, designed for use with aqueous IBS special cleaners, with large working surface, can also be used as an immersion bath. 2120035 By pressing the foot switch, cleaning fluid flows through the hollow brush, allowing oil- and grease-contaminated parts to be easily brushed clean. Can also be used as an immersion bath. By simply lifting the upper work surface, the parts to be cleaned can be placed in the fluid tank. ► Heatable parts cleaning machine for use with aqueous IBS special cleaners Gielhcswtpmascqrow ► Robust and stable construction ► Stainless steel version ► Suitable for cleaning especially large and heavy parts due to high load capacity up to 250 kg ► For manual brush cleaning ► Heatable up to max. 45°C ► Industrial version Accessories: washing machines, parts cleaning devices IBS Parts Cleaning Device Type W-250 05.2018 External dimensions device: 1145 x 670 x 1123 mm (W x D x H | closed) 1145 x 780 x 1490 mm (W x D x H | open) Work surface: 1135 x 660 mm (internal dimensions) Working height: 929 mm Load capacity: 250 kg Temperature: max. 45°C Min. fill volume: 45 L Max. fill volume: 100 L Heating power: 2 kW Connection: 230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 5430, System for efficient cleaning of components with water-based cleaning media Working area: 900 x 2100 mm Machine used, some sheets have rusted. Gjlhcswqpnrjcqrsiw Sale without warranty PERO ROBOMAT systems are designed for cleaning a variety of parts – whether lightly oiled or heavily soiled. In the universal working area of the robust ROBOMAT system, workpieces and parts with very different geometries are positioned and reliably cleaned using powerful spray cleaning. The PERO ROBOMAT is also available as a model with two baths for surface cleaning before painting and final assembly.

Condition: used, Year of construction: 2019, Technical data: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/frame: stainless steel Heating power: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (DxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Equipment: - Fully automatic part cleaning - Motor-driven turntable Gelhcewpq Abscqrsiw - 3-dimensional nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Year of construction: 2021, operating hours: 60 h, Condition: excellent (used), Functionality: fully functional, Optima steamer XD diesel steam cleaner used very good condition Diesel steam cleaner Giolhccqswnpkujrow With accessories 2 x steam hose 10 meter 2 x steam gun machine cleaning vehicle cleaning car wash

Year of construction: 1992, Condition: good (used), Roll cleaning machine Manufacturer: D.W. Renzmann, year of manufacture 1992, serial no. 21190, for roll widths up to approx. 2,200 mm, with storage tank, extraction, ext. cleaning systems, with distillate tank, capacity 1,000 l, with vacuum, decanting tank, capacity 1,500 l, control and switch cabinet Gijlhcewndh Ijcqrow

Operating hours: 8,250 h, Condition: used, Functionality: fully functional, machine/vehicle number: 102172, Perfect for cleaning small parts made of steel/stainless steel/aluminum, etc. "CeBeCo" spray washing system with Rhön wheel T R O W A M A T Type "XL", size 40100/40 WST (completely overhauled in 2020) - Loading table with rollers included free ===== - with 6-nozzle system - with direct, electric heating, with digital thermostat display, with insulation of the heating zone, with Rhön wheel, with door flap, with vapor extraction, with submersible pump, with coarse filter basket, with level monitoring, Golhcjwm Ap Uscqreiw with drying device, with control cabinet, with crane lugs, with leveling feet, with exterior coating. TECHNICAL DATA: ===== Rhön wheel internal dimensions: approx. 1,020 x 400 x 400 mm height designed for * one large basket: External dimensions: approx. 1,000 x 400 x 400 mm height * two standard baskets (with adapter): External dimensions: approx. 470 x 370 x 240 mm height Operational weight: max. 100 kg with evenly distributed load Detergent filling quantity: approx. 400 l Power requirement for heating: approx. 18 kW Power requirement for pump: approx. 5.5 kW Rinse agent filling quantity: approx. 250 l Power requirement for heating: approx. 12 kW Power requirement for pump: approx. 3 kW Fine filter bag: 50 µm fineness Thermostat: digital Insulation: approx. 25 mm Enclosure: galvanized sheet steel Power requirement for extraction: approx. 0.25 kW Power requirement for drive: approx. 0.25 kW Power requirement for hot air: approx. 3x 4.4 kW Power requirement for blower: approx. 2.3 kW Power requirement for emptying and pumping function: approx. 0.45 kW Compressed air: at least 6 bar, ½" supply line Voltage: 230/400 V, 50 Hz Control voltage: 24 V Control: Siemens with panel Total dimensions: approx. 2,740 x 2,255 mm Input height: approx. 1,240 mm Total height: approx. 2,550 mm Labeling: German

Condition: used, Cleaning washing defatting PERO type ROBOMAT 7A Useful length: 1600 mm Gslhccqjwl Dzieroiw Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: 240656490, Professional steam cleaner with diesel heating for cleaning with dry, moist or wet steam up to 185°C. The device is developed for the highest industrial demands and is intended for the toughest use in almost all industrial areas for uncompromising cleaning of production machines and equipment, presses, milling machines, CNC centers, robot lines, etc. It is excellently used in mechanical engineering, the paper industry, plastics production, foundries, shipyards, the aerospace industry, the automotive industry and a wide variety of other operations. Thanks to the use of small amounts of water, machine overhauls and repairs of equipment can be carried out directly on site in the production hall, eliminating the need for expensive dismantling and costly interruptions to operations. The compressed air compressor is included in the price! Product parameters: CONDITION: UNUSED - Original price: €16,528 excluding VAT STEAM STOP function: YES Max. operating pressure (bar): 10 bar Max. dry steam temperature: 165-185 °C system. Max. dry steam output: 900 g/min Power input: 3 kW Heating output: 62 kW diesel heating Rated voltage: 1 ~ 230V / 50Hz Pump: Diaphragm dosing Compressed air consumption: 500 L/min. Dimensions LxWxH (mm) : 1300x800x900 Weight : 160 kg Giolhcjwlfkfocqrew Diesel tank : 20 L (or 2x 20L) Standard equipment: Stainless steel cover Stainless steel base frame, glass bead blasted Diaphragm metering pump • Burner with fan Dosing pump for combined oxygen binder and anti-scaling product Diesel tank 20 l (or 2x 20L) Safety device in case of lack of water, lack of diesel, burner failure Steam safety valve Safety temperature limiter Compressor for controlling pneumatic valves Control box with PLC control and 3.5" touch screen for the following functions: The high-pressure pump is protected against dry running by a low water level switch and a guard flow Service instructions are displayed graphically and in text via the touch screen Errors are displayed graphically and in text on the touch screen DAZDS1510 Frequency converter for increasing steam humidity for increasing water volume up to 75.6 L/h (1.26L/min) Key benefits Low water consumption saves the environment and costs Very low proportion of contaminated water reduces recycling costs Minimization of service and maintenance intervals Production equipment and machines can be cleaned on site directly in the halls, so expensive dismantling and shutdown of production lines is not necessary Very fast cleaning result thanks to dry steam up to 185 ° C Industrial output of 900 g/min. dry steam Application in all industrial areas Low operating costs No material erosion Simple fault diagnosis using color diodes

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, Crates, KLT inserts, and lids – Continuous Wash System. KLT wash machine, crate washing machine Automatic washer for KLT containers, tray washer, washer for various parts - Washing - Rinsing - Degreasing - Drying - 2 tracks - 600 KLT/hour - External heating - Transport, dismantling and installation at the customer’s site available Crates, KLT inserts, and lids – Continuous Wash System. Throughput: 600 units/hour per lane Maximum passage width: 300 mm Maximum passage height: 650 mm Contamination: dust, mineral grease, mineral oil, metal chips System description The system, including all piping, is made of high-quality stainless steel, ensuring a long service life. The machine is a double-lane chain-type continuous washer. The unique modular design allows extension of an existing system at any time, ensuring that the installation can grow with your business needs and is not undersized. Hot water heating: Heat exchanger in the wash tanks for the heating circuit. Recommended supply temperature: 90°C Spray pipes: Screwed fittings Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter in all tanks. Part counter on both tracks. System features: • Stainless steel entry module • Stainless steel wash module 1 • Stainless steel wash module 2 • Stainless steel cold air blower • Stainless steel warm air drying module • Stainless steel warm air drying module (second) • Stainless steel exit module • Transport system • Variable-speed drive for transport speed • Heating via tubular heat exchangers in wash tanks • Control cabinet with electronic control system • Access doors for assembly and cleaning on both sides • Heat insulation on wash tanks and sound insulation on fans Technical Data: Overall dimensions: Length: 12,350 mm Width: 1,950 mm (2-lane) Height: 2,800 mm (total height incl. fans) Electrical power – washing: Wash pump 1: 7.50 kW Wash pump 2: 7.50 kW Cold air blower: 5.50 kW Warm air blower 1: 2x Warm air blower 2: 2x Warm air heating coils: 4x Drive: 0.55 kW Fume extraction fan: 3.00 kW Voltage: 400 V Frequency: 50 Hz Gelhjwi Nl Ioccqreiw Protection class: IP 55 The control system is placed next to the machine. The control cabinet includes all necessary components for operation and monitoring of the system. Equipment layout and wiring are in accordance with current VDE regulations. The electrical supply cable to the control cabinet must have at least 2 m of extra length. Emergency STOP switches are installed in the loading/unloading area. Hot water supply at approx. 90°C is required for heating the wash tanks.

Year of construction: 2025, Condition: new, Spray Cleaning System - Parts Washing System - NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround Giolhjwitvqsccqrew - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Gelhcewhc Sxjcqrsiw ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2014, Condition: good (used), Serial no. 2.930, wire mesh loop belt, pass-through width 250 mm, pass-through height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (rinse tank 500l + wash tank 800l), heating, Siemens PLC control with touch display, control and switch cabinets, stainless steel drip tray Gislhowg E Nwjccqrjw +++ Attention: Machine is part of an online sale! +++

Year of construction: 2008, Condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm Gelhowgi Epeccqroiw weight of the machine ca. 300 kg

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 10.152.82L, load capacity: 350 kg, empty load weight: 400 kg, water pressure: 2.4 bar, Feet need to be adjusted a bit. Heatable for aqueous cleaning agents. For removing oil and grease contamination in the shortest time. Universally usable for fully automatic cleaning of small parts from production, manufacturing, maintenance, such as bolts, bushings, ball bearings. 2129908 Easy handling thanks to a fully automatic cleaning process. This allows professionals to concentrate on other important tasks. The washing tank is filled with a mixture of water and water-soluble IBS special cleaner (washing lye). The dirty items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the lye is heated in the tank. In the closed device, the basket rotates at a constant speed around its own axis. The pump units draw the washing lye from the washing tank and convey it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are intensively sprayed with the hot lye from all sides during the even rotation of the motor-driven basket. After the cleaning process is finished, the device switches off automatically. ∙∙ 2 pumps arranged horizontally ∙∙ 6 three-dimensional nozzle pipes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel ∙∙ rotating wash basket made of stainless steel, V-belt drive via separate motor ∙∙ steam extraction ∙∙ stainless steel sieve plate with filter basket above the washing tank ∙∙ water shortage safety ∙∙ individually height-adjustable feet Gislhcjwfgl Decqrsw WxDxH to 1970 x 1790 x 1500 mm WxDxH open 1970 x 2090 x 2425 mm Useful height: 800 mm Load capacity: 350 kg / optionally 500 kg Basket diameter: 1293 mm Washer tank volume: 340 liters Pump pressure: 2.4 bar Spray rate: 2 x 10,800 L/h Power requirement: 15.1 kW / 400 V / 50 Hz, 32 A Weight: 400 kg Temperature: 0-60°C

Condition: good (used), Year of construction: 2021, Functionality: fully functional, total length: 2,120 mm, total width: 2,670 mm, total height: 1,910 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 90 °C, power: 32 kW (43.51 HP), maximum load weight: 500 kg, workpiece weight (max.): 500 kg, cage diameter: 1,380 mm, frequency: 50 Hz, usable height: 700 mm, Industrial washing machine for cleaning and degreasing workpieces using an alkaline detergent up to pH 14. Machine made entirely of stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts with detergent sprayers at the top and bottom. Built-in filter for coarse dirt. Equipped with a detergent pump and a drain pump to pump away the used cleaning fluid. Level switches in the tank for detecting the liquid level. Monitoring of any leaks. Control cabinet with digital temperature display. PLC Siemens S7-1200. Control cabinet equipped with signal lamp for status indication. Machine is in very good condition and can be used immediately. Gielhccqswfdpmsrow

Condition: good (used), Year of construction: 2021, Functionality: fully functional, total width: 2,000 mm, total length: 1,770 mm, total height: 1,650 mm, pressure: 6.1 bar, input voltage: 400 V, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, cage diameter: 1,100 mm, compressed air connection: 6 bar, frequency: 50 Hz, heating capacity: 7.5 kW (10.20 HP), injection pressure: 6.1 bar, temperature: 75 °C, type of input current: three-phase, usable height: 600 mm, Industrial washing machine for cleaning and degreasing workpieces by means of an alkaline cleaning agent. Machine made entirely of stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts with sprayers for detergent at the top and bottom. Built-in filter for coarse dirt. Equipped with a detergent pump and a drain pump to be able to pump away the used cleaning fluid. Level switches in the tank for detecting the liquid level. Monitoring of any leaks. Switch cabinet with digital temperature display. Cabinet equipped with signal lamp for status indication. Machine is in very good condition and can be used immediately. Gslhccqowfdbcorsiw

Year of construction: 2022, Condition: used, machine/vehicle number: 220900907, Technical data: Basket diameter (mm) 1500 Usable height (mm) 500 Tank capacity (l) 500 Pump capacity (l/min) 200 Spray pressure (bar) 5 Heater power (kW) 12 Maximum power (kW) 8-15 Power supply 3-400 V Basket load capacity (kg) 350 Work time programming (min) 0-99 Temperature control 0-60 Depth (mm) 2000 Gelhccswb Dbzeqrsiw Width (mm) 2000 Closed/open height (mm) 1500/2500 There are visible operational scratches and signs of use on the external casings. During the inspection, it was not possible to connect to a power source and check its operation. There is no information on the intensity of use of the machine, as well as repairs and maintenance activities performed

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, YUKON DAD 2BL (built in 2014) For clean components on a continuous basis Stainless steel continuous cleaning system with oil separator for continuous material flow. The items to be cleaned pass continuously, in cycles if necessary, through the consecutive treatment zones. Cleaning is achieved by passing the items past the permanently installed nozzle systems. For parts with a maximum dimension of 400 x 100 mm Gslhccewbt H Heqrsiw A wire-link conveyor conveys the components horizontally or vertically through the cleaning system • Circumferential nozzle frame - the offset nozzle arrangement enables cleaning on all sides • Separation of the treatment zones reduces mixing • Adaptation of the nozzles and nozzle frames to the component • Adaptation of the usable dimensions, load capacities, and pump outputs is possible The process steps take place in consecutive treatment zones: • Spray cleaning, cascading of different wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volume: Wash tank: 800 liters Rinse tank: 500 liters Heating capacity: Wash tank: 48.0 kW Rinse tank: 30.0 kW Wash tank pump: 3.0 kW Rinse tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature min. 45°C to max. 60°C WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 2022, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 33330 052022, BOUS parts washer – little used, top condition – with oil separator & control panel Location: 53840 Troisdorf Price (net): €33,529.41 plus VAT (€39,900 gross) Condition: Used, very well maintained New price: approx. €60,000 Description: For sale is a robust and powerful parts washer from BOUS in Cologne. The system was only used 2-3 times a day, is in excellent condition, and is designed for continuous operation. Due to a relocation, the machine cannot be transported. Features & Benefits: Control panel for safe system operation Large drip tray included Separate oil separator for solids filtration and extending the service life of the cleaning fluid Quality components from brand manufacturers: Siemens control system with panel Grundfos high-pressure pumps Very robust construction, ideal for industrial applications Low operating hours, well-maintained Weight: approx. 2,800 kg Dimensional drawing and wiring diagram available upon request Maintenance and spare parts service provided by Vapic GmbH Technical Specifications: Power: 230/400 V, 50 Hz, PE/N Control voltage: 24 V Connected load: 57/51 kW, 99/85 A Power requirement: Heating: approx. 18.0 kW Wash pump: approx. 5.5 kW High-pressure centrifugal pump: approx. 15.0 kW Oil separator: approx. 0.25 kW Water filling: Approx. 500 liters Compressed air: min. 6 bar, ½" line (filtered, unoiled, dry) Exhaust piping required Transport & Handover: Machine will be handed over disconnected and ready for operation. Transport is the responsibility of the buyer. Giolhccqswavwrjrsw We are happy to recommend a reputable freight forwarder for pickup. Service & Support: Upon request, we can put you in touch with a specialist who is very familiar with the BOUS machine and can assist you with questions or commissioning. 📩 Contact us now and arrange a viewing! The parts washer is available and ready for use immediately.

Year of construction: 2020, Condition: excellent (used), Parts cleaning system / spray cleaning system type CM19, 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,870 mm (octagonal) Max. load weight: 1,000 kg The basket is moved in and out by the operator onto the feeder trolley parked/positioned in front of the system (detachable/mobile). Usable height: 1200 mm Wash tank: Volume: 750 liters, spray pressure: 5.0 bar Rinse tank: Volume: 600 liters, spray pressure: 3.5 bar Total connected load: approx. 70 kW Control system: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + 1 filter basket in the tank return line (washing/rinsing) for filtering coarse particles + Weekly timer for the electric heater + Steam extraction including condensate return + Automatic water refilling of both tanks + Inspection hatch/cleaning hole cover in the tank area of both tanks + DPS 75 plate phase separator for oil separation + Feeder trolley in front of the system; including extendable basket + Automatic Basket position after the end of the cleaning cycle + Manual intervention - additional manual cleaning using high pressure (up to 60 bar, continuously adjustable; including foot switch / compressed air blow-off gun / LED lighting in the chamber) + Side channel blower (5.5 kW) for blowing off the parts using an air knife + Medium filtration via bag filters (Eaton, Topline) in both circuits (washing and rinsing) + Optimized spray system with horizontal nozzle pipes on the side wall of the wash booth + Special spray system (can be optionally connected) for small components (= electric spray system) + Automatic chemical dosing 0.5-4% Gislev Tm Ebehccqrjw + Tank emptying pump using a compressed air diaphragm pump + Conductivity monitoring in the rinse tank + Remote maintenance including modem + Tanks separated into two modules; Fully insulated (various temperatures possible) + Vacuum suction gun for manual suction of scooping parts + Removable filter baskets in the return line + Stainless steel circulation pumps including mechanical seal and soft starter System has been used very little, as it was purchased for a special project. Condition: As new Price excludes VAT, transport, assembly/commissioning This offer is subject to change and non-binding. Subject to changes, errors, and prior sale. Used system, therefore no guarantee/warranty is provided.

Year of construction: 2025, operating hours: 10 h, Condition: as good as new (ex-display),

Year of construction: 2025, Condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Gijlhcsv S Dk Sscqrew Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.