Habusch Maschinen GmbH

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Hfsdoxn Itropfx Afien Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: used, Year of construction: 2012, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat 240 x 150 mm capacity 45 degrees: round 240 mm capacity 60 degrees: flat 150 x 180 mm capacity 60 degrees: round 150 mm turning speed range: 35 + 70 m/min saw band length 3100 x 27 x 0.9 mm weight of the machine ca. 540 kg range L-W-H 1800 x 950 x 2100 mm Features: - Robust electro-hydraulic band saw (INDUSTRY) - Large mounted rotary table * For miter cuts from 45° left to 60° right - Automatic saw frame lowering * With continuously adjustable feed Hjdpfjxiyzkjx Afiefn * End stop at end of cut - 2x saw blade speeds - Manual vice clamping - Control panel - front right - Coolant device - Operating instructions in German

Condition: new, Year of construction: 2025, Standard Equipment of the MEBAbase 32A Band saw automatic machine with partial enclosure for safe, clean, and quiet operation Torsion-resistant welded construction for high stability and long service life Lateral band guide combining preloaded carbide slide guides and band twist rollers Hydraulic saw feed Infinitely adjustable saw feed speed from 1–300 mm/min Continuous monitoring of cutting pressure and feed, with automatic adjustment if cutting pressure is too high Infinitely variable cutting speed 10–80 m/min Large capacity coolant tank (approx. 90 liters) Automatic band breakage monitoring with automatic shutdown in case of band break Hydraulic saw band tensioning Powered round brush for optimal cleaning of tooth edges Automatic material feed with hydraulic full-stroke material clamping Stable, linear-guided feed vise for maximum positioning accuracy Integrated material end detection Feed vise can be opened on both sides Enclosed roller conveyor with precision, ball-bearing rollers Hjdpsxdv Rdefx Afiofn Convenient parts disposal via inclined cut-off chute with coolant return Robust panel controller with touchscreen, menu-guided, intuitive symbols Fully automatic sawing cycle for any length and quantity Simple program creation and management Chip conveyor included as standard equipment Technical Data Type: Straight cut saw 90° Max. Cutting Area Width ↔ (mm): 320 Max. Cutting Area Height ↕ (mm): 320 Max. Cutting Area Ø (mm): 320 Material: Pipe, Round Solid Material, Square Pipe, Square Solid Material Motor [kW]: 5 Saw band [mm]: 4115 x 34 x 1.1 Band speed [m/min]: 10–80 Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700 Weight [kg]: 2000 Working height [mm]: 830 Feed length per stroke [mm]: 500 Degree of automation: Series cutting Options / Additional Equipment Additional chip conveyor or custom chip brush solutions Expanded coolant systems Customizable cutting line indicator (laser) Mounting elements (as required) Technical modifications reserved. The machine is sold under statutory warranty. Details regarding the exact delivery time will be provided in your order confirmation.

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Hodpfx Afoxdbzboiofn Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm Hodpexc Nwujfx Afiofn cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut. Standard Features: - Saw frame made of a robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left - Movable vise with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling Hfsdpfx Aoxcnqasfisn - Mechanical bandsaw blade tensioning with electrical blade tension monitoring - Precise blade guidance via adjustable, ground carbide plates and ball bearings - "Push&Pull" controller for adjusting the lowering speed - Rotating swarf removal brush - Precision angle scale for angles from 60° right to 45° left - Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting motor and pump (dead-man function in manual mode) - Safety switch on the saw frame guard and blade tensioning carriage - Limit switch for automatic motor shutoff after cutting - Length stop for repeat cuts - Material support on the infeed side - Bi-metal saw blade - Tools and user manual Technical Data: - Pole-changeable 400 V three-phase motor, 1.1/1.5 kW - 2 cutting speeds (33/66 m/min) - Vise clamping width: 305 mm - Working height: 940 mm - Saw blade dimensions: 2750x27x0.9 mm - Weight: 380 kg Cutting capacity in mm: 90° 255 250x250 300x200 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Condition: used, Year of construction: 2013, cutting diameter 250 mm capacity 90 degrees: flat 250 x 450 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 250 x 190 mm table height ca. 650 mm saw band length 3300 mm dimensions of saw-band 3300 x 27 x 0,9 mm cutting speed 21 - 62 m/min Hfsdpfsxab Efsx Afion total power requirement 1.5 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1739 x 571 x 1130 mm very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: ?machineno=1008-9173350

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable Hedpfxexabpwj Afijfn - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 150 x 150 mm capacity 45 degrees: flat 150 x 210 mm capacity 60 degrees: round 90,0 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: flat 90 x 100 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. ca. 900 mm total power requirement 1,2 kW weight 240 kg range L-W-H 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) * for sawing solid material and profiles - miter cuts up to 60° left possible Hodpfx Afoxabbgoisfn - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut 3. high-speed lowering of the saw frame - without saw cut

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off Hedoxaa Tbspfx Afisfn

Condition: new, cutting diameter 250 mm Hodpfxexaa H Io Afiofn capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 1.530 x 900 x 1.720 mm Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base with - coolant device Hfsdpexaa Dyjfx Afisn - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm Hfedpfx Aoxaarkefijn capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 0,7 / 0,81 kW weight of the machine ca. 265 kg Equipment: - compact / robust manual band saw - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut Hfsdpfoxaacijx Afisn - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Hodpfxjw U Skvo Afiofn Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1991, machine/vehicle number: 1430 91, Technical data Cutting diameter: 260 mm Saw band length: 3660 mm Cutting width: 0.9 mm Cutting range - square - 260 x 260 mm Feed length: 500 mm Feed length: multiple 5,999 mm Cutting speed: 17 - 106 m/min Saw blade dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Hfedpew Eua Ajfx Afien Machine weight approx. 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories Coolant Information according to manufacturer

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Hjdpfxjwzzgno Afisfn Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: new, Year of construction: 2022, 230 mm 2730 mm Hfjdswp Tmiepfx Afien 320 mm 230 mm 320x130x mm

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Hsdpswl Ea Tofx Afiefn Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: used, Year of construction: 2020, cutting diameter 250 mm saw band length 3100 x 27 x 0,9 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 280 x 190 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter - Material detection during lowering Hfodpjwkvq Hjfx Afisn

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Hfjdswirpvspfx Afion Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm Hsdewiqpzspfx Afijfn rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request

Condition: new, cutting diameter 260 mm saw band length 2455 mm cutting width max. 260 x 200 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting angle 0 - 60 ° power capacity 0,75 / 1.1 kW cutting speed 34 / 68 m/min table height over floor 900 mm weight of the machine ca. 220 kg dimensions of the machine ca. 1,45 x 0,72 x 1,05 m - Automatic lowering device with control valve Hfsdpfewc D Azsx Afisn - Quick-clamping vice - Bar stop with material stop - Quick-release angle clamp - Angle scale - Oil bath for permanent lubrication - Cooling system with electric pump - Saw blade wheels with precision bearings - Saw blade track adjustment - Saw blade tensioner - Saw blade guide adjustable - Adjustable tensioning bearing front/rear - Chip brush - Saw blade guard with limit switch - Saw frame with tapered roller bearings - Sheet steel base with chip tray

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Integrated coolant system Hfsdpfowbfhcsx Afion Ideal for workshops and industrial use

Condition: new, Year of construction: 2025, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system Hfjdewa Ui Tepfx Afijn