Sanber OÜ

Condition: used, mileage: 58,893 km, power: 74 kW (100.61 HP), first registration: 01/2022, fuel type: diesel, empty load weight: 1,570 kg, maximum load weight: 915 kg, overall weight: 2,485 kg, wheelbase: 3,105 mm, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 4,756 mm, loading space length: 2,174 mm, loading space width: 1,714 mm, loading space height: 1,305 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Passenger double seat, interior trim, wooden load floor, L2 wheelbase, roadworthy, sun visor, partition, lumbar support, heat-insulating glass, clock & tachometer, iPad/iPod connection, 4-door, front-wheel drive, service booklet maintained, Euro 6d, green environmental badge (4), new inspection, steel rims, puncture repair kit, black, 6-speed gearbox, sliding door on the right, parking assistance, parking sensors at the rear, roof rack, traction control, electric windows, radio, radio/MP3, MP3 interface, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, comfort seats, 3rd brake light, new MOT/emission test, air conditioning, electric exterior mirrors, heated exterior mirrors, electric windows, parking sensors at the rear, 3-seater as a passenger double bench seat, driver's seat height adjustment, lumbar support for the driver's seat, 6-speed manual gearbox, central locking with remote control, driver airbag, ASR traction control, ESP/ESC electronic stability program, roof rails, fog lights, cruise control, on-board computer, immobilizer, daytime running lights, adjustable steering column, power steering, start-stop system, outside temperature display, headlight range adjustment, hill-start assist, Maxi long wheelbase L2, 3 headrests in the front, rear wing doors without glazing with 180° opening, cargo area partition, sliding door on the right, 2x 12V socket in the center console, lashing eyes for securing cargo, side turn signals integrated into the exterior mirrors, cargo area lighting, 2x sun visors - right with mirror, height-adjustable seat belts, 2x coat hooks, storage compartments in the center console, lockable glove compartment, grab handle on the interior roof frame, storage compartment in the headliner, exterior mirrors in vehicle color, Eco-Jet package, auxiliary heater, vehicle available immediately. We will gladly provide you with an individual financing or leasing offer according to your wishes. We also offer the option of paying off your existing loan and accepting your used car in trade. Nationwide registration service is available = price on request. Bledj Ahzb Nspfx Aknop

Condition: used, mileage: 58,893 km, power: 74 kW (100.61 HP), first registration: 01/2022, fuel type: diesel, empty load weight: 1,570 kg, maximum load weight: 915 kg, overall weight: 2,485 kg, wheelbase: 3,105 mm, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 4,756 mm, loading space length: 2,174 mm, loading space width: 1,714 mm, loading space height: 1,305 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Passenger double seat, interior trim, wooden load floor, L2 wheelbase, roadworthy, sun visor, partition, lumbar support, heat-insulating glass, clock & tachometer, iPad/iPod connection, 4-door, front-wheel drive, service booklet maintained, Euro 6d, green environmental badge (4), new inspection, steel rims, puncture repair kit, black, 6-speed gearbox, sliding door on the right, parking assistance, parking sensors at the rear, roof rack, traction control, electric windows, radio, radio/MP3, MP3 interface, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, comfort seats, 3rd brake light, new MOT/emission test, air conditioning, electric exterior mirrors, heated exterior mirrors, electric windows, parking sensors at the rear, 3-seater as a passenger double bench seat, driver's seat height adjustment, lumbar support for the driver's seat, 6-speed manual gearbox, central locking with remote control, driver airbag, ASR traction control, ESP/ESC electronic stability program, roof rails, fog lights, cruise control, on-board computer, immobilizer, daytime running lights, adjustable steering column, power steering, start-stop system, outside temperature display, headlight range adjustment, hill-start assist, Maxi long wheelbase L2, 3 headrests in the front, rear wing doors without glazing with 180° opening, cargo area partition, sliding door on the right, 2x 12V socket in the center console, lashing eyes for securing cargo, side turn signals integrated into the exterior mirrors, cargo area lighting, 2x sun visors - right with mirror, height-adjustable seat belts, 2x coat hooks, storage compartments in the center console, lockable glove compartment, grab handle on the interior roof frame, storage compartment in the headliner, exterior mirrors in vehicle color, Eco-Jet package, auxiliary heater, vehicle available immediately. We will gladly provide you with an individual financing or leasing offer according to your wishes. We also offer the option of paying off your existing loan and accepting your used car in trade. Nationwide registration service is available = price on request. Blodpfxo Ahzb Ts Aknsp

Condition: reconditioned (used), Year of construction: 1993, For sale is a Kaltenbach cold-cutting saw. Gearbox is free of play! Type: KKS 400 EC E Year of manufacture: 1993 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working range: 130 mm Working range for square material: 120 mm Working range for flat material: 305 x 20 mm Working range for round material: 130 mm Minimum working range: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions L x W x H: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Bodpfe Ahzb Ejx Aknolp Shipping possible upon request. Forklift available for loading.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,600 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, number of axes: 9, This 9-axis TSUGAMI HS327 swiss type turning machine was manufactured in 2017. It features a maximum machining diameter of 32 mm and includes a main spindle with 8 positions for turning tools. The machine has been completely overhauled in 2022, ensuring optimal performance. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS327 machine we have for sale. Contact us for further details. Bsdpfxs Ahzbzs Aknolp - Number of Axes: 9 axes (X1, X2, Y1, Y2, Z1, Z2, B 135°, C1, C2)- Max. Machining Diameter: 32 mm- Overhaul Status: Completely overhauled in 2022- Main Side: - Main Spindle: 1, Z1 / C1 axis - Turning Tools: 8 positions - Front Tool Holder: 4 driven cross tools (3 x AR16 and 1 x AR20) - B-Axis Tool Holder: 8 driven tools AR16 (front and back), 4 stationary boring tool positions (Ø 25 mm) - B-Axis Swivel Angle: 0° to 135° - Max. Speed Driven Tools (B-axis): 5,000 rpm- Sub-Spindle / Back Working Side: - Sub-Spindle: 1, X2 / Z2 / C2 axis - Rear Tool Holder: 4 stationary tools and 4 driven tools (Max. 8,000 rpm, AR16 collet, max. drill Ø 8 mm, max. thread M6)- Associated Bar Feeder: - Manufacturer: FMB MASCHINENBAU - Type: Turbo 3-36 / 3200 A - Year of Manufacture: 2017 - Bar Capacity: 3–38 mm (nominal 3–36 mm) - Bar Length: 3,200 mm- Optional Equipment:  - Chip Conveyor: Inclined scraper/hinged belt chip conveyor (pallet-mounted)  - High-Pressure Coolant / Filter Unit: External high-pressure pump unit with control panel mounted on pallet Technical Specification Counter Spindle Yes

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 16580, bending force (max.): 440 t, working width: 6,100 mm, stroke length: 320 mm, overall weight: 39,000 kg, total length: 7,000 mm, total width: 2,500 mm, total height: 3,410 mm, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 50 Hz, BAYKAL APHS 6112x440 Hydraulic Press Brake, built in 2010 by BAYKAL in Bursa, Turkey. A heavy-duty 440 ton CNC press brake with 6100 mm bending length, suited for bending thick and long sheet metal parts in steel construction, trailer, tank and heavy fabrication workshops. General Information - Machine Type: Hydraulic Press Brake - Manufacturer: BAYKAL (Turkey) - Model: APHS 6112x440 - Year: 07/2010 - Condition: Used Technical Specifications - Bending capacity: 440 ton - Bending length: 6100 mm - Max. stroke: 320 mm - System pressure: 240 bar - Main motor power: 30 kW - Main voltage: 400 V / 50 Hz / 3 Ph Blsdpfx Ako Ahzbwjnop - Machine weight: 39000 kg - Top tool weight: 120 kg - Bottom tool weight: 800 kg - Overall dimensions (L x W x H): 7000 x 2500 x 3410 mm Description The BAYKAL APHS series is a synchronized hydraulic press brake built on a rigid welded steel frame, designed for accurate and repeatable bending over the full working length. With 440 ton of pressing force and a 6100 mm bending length, this machine handles long and heavy parts that smaller press brakes cannot. The machine comes with upper and lower tooling as shown in the photos. Further details on control, backgauge axes and working hours are available on request. Applications - Steel construction and structural profiles - Trailer, truck body and chassis parts - Tanks, silos and pressure vessel parts - Agricultural machinery and heavy equipment - Lighting poles and long sheet metal profiles Advantages - High 440 ton capacity for thick sheet metal - Long 6100 mm bending length - Robust and proven BAYKAL construction - Wide availability of spare parts and service Photos and videos available on request. Inspection possible in Macedonia. ID: 0149

Condition: excellent (used), functionality: fully functional, pressing force: 450 t, stroke length: 300 mm, table width: 850 mm, table length: 630 mm, distance table to ram: 860 mm, total length: 3,100 mm, total width: 3,100 mm, total height: 4,300 mm, overall weight: 20,000 kg, Equipment: documentation/manual, Ficep PFM 215 screw press, screw diameter 215 mm, 450-ton capacity. In very good condition, as shown in the photos and technical specifications attached. The press is stored in our workshops in Peschadoires, France. Technical documentation will be provided with the machine. Bljdpfx Ao Ahzbteknep Price upon request.

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB TURBO 3-36 / 3200 (2012) Technical Specification Counter Spindle Yes Blodpfx Ake Ahzbdsnjp

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 49834, Segment diameter: 560 mm Usable width of the rollers: central part 630 mm, outer part 270 mm Length of the rollers: central part 870 mm, outer part 1340 mm Bledps Ahzbajfx Aknep Roller adjustment: 20 mm Roller speed: 52 rpm Maximum rolling thickness: 25 mm Motor power: 40 hp Motor speed: 1500 rpm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, DEFUM WFM 100N CNC Horizontal Boring and Milling Machine | Siemens 828D | Rebuilt by METALEX in 2014 For sale: DEFUM WFM 100N CNC horizontal boring and milling machine with a rotary worktable and an extendable boring spindle. The machine underwent a complete overhaul, rebuild and modernization by METALEX in 2014. It is equipped with a Siemens SINUMERIK 828D CNC control and a Siemens SINAMICS drive system. Its heavy, rigid construction, 100 mm boring spindle and 1100 × 1100 mm worktable make it suitable for milling, drilling and boring housings, plates and other engineering components. TECHNICAL DATA Manufacturer: DEFUM, Dąbrowa Górnicza, Poland Model: WFM 100N Serial number: 8137 Year of manufacture: 1986 Complete overhaul, rebuild and modernization: 2014, METALEX CNC control: Siemens SINUMERIK 828D Drive system: Siemens SINAMICS Table and travels: – Table working surface: 1100 × 1100 mm – Transverse travel: 1200 mm – Vertical travel: 1000 mm – Longitudinal travel: 900 mm Spindle and drives: – Boring spindle diameter: 100 mm – Spindle motor power: 18.5 kW – Feed drive power: 3 × 4.5 kW – Total installed power: 50 kW Dimensions and weight: – Length: 4610 mm – Width: 3620 mm – Height: 3110 mm – Machine weight: 11,000 kg EQUIPMENT – Siemens SINUMERIK 828D CNC control – Siemens SINAMICS drives – Rotary worktable with T-slots – Extendable boring spindle – Operator panel mounted on a swivel arm – Coolant supply system Blodpfe Ahzavex Aknjp – Central lubrication system Key feature: complete overhaul and modernization carried out by METALEX in 2014, including a Siemens CNC control retrofit. Please contact us for further information about this offer.

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower Bljdpfx Aks Ahzarsnep - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: used, mileage: 611,234 km, power: 331 kW (450.03 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, spoiler, = Additional Options and Accessories = - Roof spoiler Bodpfxj Ahzans Aknjlp - Speed limiter - Aluminum fuel tank - Headlights - Side skirts - Stability control - Visor - Alternating current - Toolbox = Additional Information = Year of manufacture: 2020 Cab: Standard Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Alloy wheels; Steerable; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Dual tires; Alloy wheels; Tire tread depth left inner: 11 mm; Tire tread depth left outer: 11 mm; Tire tread depth right inner: 13 mm; Tire tread depth right outer: 13 mm; Suspension: Air suspension Unladen weight: 7,553 kg Payload: 11,447 kg GVW: 19,000 kg Damage: None

Condition: used, operating hours: 17,710 h, lifting height: 6,550 mm, free lift: 2,340 mm, fuel type: electric, mast type: triplex, fork length: 1,190 mm, fork width: 930 mm, total height: 2,820 mm, total length: 1,970 mm, total width: 1,180 mm, color: yellow, Year of manufacture: 2001 Empty weight: 4.090 kg Lifting capacity: 2.000 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: D807A03749Y - Operating hours: 17710 - Lifting capacity: 2000kg - Lifting height: 6550mm - Overhead clearance: 2810mm - Free lift: 2340mm - Fork length: 1190mm - Maximum fork width: 930mm - Minimum fork width: 270mm - Number of wheels: 3 Wheels - Attachment: Fork positioner, Side-shift - Options: Non-marking tires, Free-lift, Work lights - Mast: Triplex Blodps Ahzakefx Aknjp - Drive: Electric - Battery information: - └ Battery voltage: 48V - └ Tray length [mm]: 980 - └ Tray width [mm]: 630 - └ Tray height [mm]: 680 - Transport dimensions: 1970mm x 1180mm x 2820mm (l x w x h) - Transport weight [kg]: 4090kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Code: 0515 Brand: PEGIC Model: GP 350 RT - CE Standard Cut-off saw with base and roller conveyor for cutting wood, aluminium, plastics, joinery, bespoke furnishings, furniture, picture frames and various other items – CE Standard Technical data: Blade diameter 350 mm Hole 30 Revolutions per minute rpm 3000 Cutting capacity at 45° mm 115 x 110 Cutting capacity at 90° mm 160 x 110 Motor 3 Hp Blade guard with bearing Double shock-absorbing Base cabinet with door Pair of pneumatic clamps Roller table with movable stop and measuring scale 3000 mm Bsdpfxe Ahzacs Aknelp Roller conveyor complete with exit support 2000 mm Overall dimensions of assembled machine mm 6400 x 800 x 1500 h Transport dimensions: Machine mm 800 x 800 x 1500 h – Roller conveyor mm 3600 x 500 x 1000 h Weight kg 100

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SZKA 213 Jaw width 30 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 70/90/H50 mm -Weight: 1.4 kg Bjdpfj Ahy U Hjx Aknelp

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Blsdpfx Aj Ahy U Aoknjp -Interchangeable jaws: 3-piece hard attachment jaw set -Width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/135/H80 mm -Total weight: 6.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Replaceable jaws: soft attachment jaws, 3 sets = 9 pieces -Type: Jaw width 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 225/85/H45 mm Blodo Ahy Uxjpfx Aknjp -Weight: 5.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm Blodpe Ahy Uuofx Aknep -Total weight: 12.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Bjdpfxj Ahy Uqe Aknslp -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 30 mm -Shipping/Price: complete -Dimensions total: 125/180/H50 mm -Total weight: 5.9 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, operating hours: 30,000 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 12, total height: 2,900 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 4,260 kg, table length: 3,600 mm, table width: 1,360 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Year 2008, table dimensions 3600 x 1350 mm, with only 30,000 operating hours. Regularly maintained. 11 kW water-cooled 5-axis motor. 12-position tool changer. Drilling head with 30+4 spindles. 8 supports (1350 mm). Loading aids for heavy workpieces. Automatic lubrication. 250 m³/h vacuum pump. Bljdpfx Ako Ahy Umenjp

Condition: new, Year of construction: 2024, operating hours: 50 h, spindle speed (min.): 1 rpm, spindle speed (max.): 4,500 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 8, Equipment: chip conveyor, documentation/manual, Technical specifications: Control system: Fanuc 0I TF Plus, 15'' screen Main spindle Clamping device: 177E, optional (Hainbuch...) Spindle height: Spindle bore: Ø 79 mm Max. bar diameter: Ø 51 mm Spindle mounting: A2-6 Drive power: 7.5/11 kW Spindle speed: 4,500 rpm Counter spindle Clamping device: 173E, optional (Hainbuch...) Spindle bore: Ø 48 mm Max. bar diameter: Ø 32 mm Spindle mounting: A2-4 Drive power: 3.7/5.5/7.5 kW Spindle speed: 5,000 rpm Turret for counter spindle Interface: VDI 25 Stations: 8 powered tool stations Drive power: 2.2 kW Max. speed: 6,000 rpm Indexing time: 0.1 - 0.3 seconds Upper turret Interface: BMT 45 Stations: 12 powered tool stations Blodps Ahy Uiefx Aknep Drive power: 2.2/3.7 kW Max. speed: 6,000 rpm Indexing time: 0.1 - 0.3 seconds Standard equipment: Transformer Parts collector Parts conveyor Chip conveyor Coolant tank, 250L Machine status indicator: 3-color Machine dimensions: L x W x H 2,810 x 1,970 x 1,850 mm (without chip conveyor) Machine weight: 5,350 kg

Condition: excellent (used), mileage: 413,012 km, power: 132 kW (179.47 HP), first registration: 01/2013, fuel type: diesel, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,050 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 4,000 kg, permissible axle load (axle 2): 6,800 kg, loading space length: 3,760 mm, loading space width: 2,120 mm, loading space height: 2,250 mm, Equipment: ABS, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Alarm system - Leaf spring suspension - Speed limiter - Speed limiter - Air conditioning - Air suspension - Air-suspended driver's seat - Radio/CD player - Mirror heating - Stability control - Automatic heating system = Notes = MAN TGL 10.180 CHEREAU refrigerated body + tail lift 760 kg Carrier XARIOS 500 413,012 km 2013 Euro 5 4x2 Truck, Belgium Blodpfx As Ahy Ufeknop Chassis number: WMAN15ZZ0DY292616 Video of the truck (YouTube): EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit permit/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands

Year of construction: 2016, condition: used, Used industrial ammonia refrigeration system from Johnson Controls / YORK, manufactured in 2016, complete with a machine container, three compressors, refrigerant separators, control system, and gas detection system. According to the technical documentation, the system includes screw and reciprocating compressors, as well as components for refrigeration and recooling. Manufacturer / System Builder: Johnson Controls Systems & Service GmbH Year of Manufacture: 2016 Refrigerant: Ammonia (NH3 / R717) Design: Containerized industrial refrigeration system Screw Compressor: 1 × SAB 193L Reciprocating Compressors: 2 × CMO 28 Compressor Control: Danfoss frequency converter FC 102 Refrigerant Separator: EM-Polar KBA 900/10-22, manufactured in 2016 Separator Volume: 1,440 liters Permissible Separator Pressure: -1 to +16 bar Separator Test Pressure: 22.9 bar Permissible Separator Temperature: -10 to +100 °C Other System Components: Oil Separator OS 324/5, Alfa Laval AlfaNova 76-126H plate heat exchanger, Grundfos pumps, refrigeration valves Recooling: Thermofin condensers and recoolers Gas Detection System: Dräger REGARD 3900 Gas Monitoring: NH3 sensors and ExTox measuring devices Operation: Siemens SIMATIC HMI touch panel Bledpfxe Ahy Ubs Aknsp Frequency Converters: 3 Danfoss VLT, as shown in the photos Extensive documentation is available. Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, *SEPRO SUCCESS 11 S3 – Linear Servo Robot* Year: 2014 | S/N: P20629 Previously installed on: Netstal Elion 1750 (175 t) *Strokes* • X (traverse): 2,500 mm • Y (demoulding): 500 mm • Z (vertical): 1,000 mm *Performance* • Payload: 5 kg • 3 servo axes (brushless) • Max. speed: X 2 m/s | Y 2 m/s | Z 3 m/s • Repeatability: ±0.1 mm • Pneumatic wrist: R1 0–90°, R2 0–90° / 0–180° *Control* • SEPRO Visual 2 • 10.4" touchscreen pendant • EUROMAP 67 interface • USB and Ethernet *Options* • 16 I/O extension module • Conveyor control (400 V, 3-phase) • Digital vacuum switch • PC program editor • Access door safety interlock kit *Technical data* • Power: 3 x 400–480 V, 50/60 Hz, 1.5 kVA • Air: 6 bar • Robot weight: 243 kg • Control cabinet weight: 43.5 kg • Dimensions: 3,410 x 1,200 x 1,500 mm Bjdpfx Ake Ahy T Tonjlp CE declaration and layout drawing available. *Price:* on request *Location:* [doplniť] *Availability:* [doplniť]

Condition: excellent (used), Year of construction: 2015, operating hours: 10,001 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 3,850 kg, Operating hours: 10,001 h Spindle hours: 3,621 h Control system: SIEMENS Sinumeric 840 D Spindle speed: 12,000 rpm Tool changer with 20 positions Table size: 790 x 560 mm Bsdpo Ahy T Njfx Aknslp Max. workpiece weight: 600 kg Tool holder: SK 40 Includes tools (see images)

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm Bjdpj Ahy Tzefx Aknelp - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)