VOLZ Werkzeugmaschinenhandel GmbH & Co. KG

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor. Pgjdpfxsz Ha H Sj Af Sst

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Machine Benefits Technical Machine Benefits Psdpjz E Ramsfx Af Ssgt • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * High-torque motor power: 18.5 kW. * Cutting force: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool consumption tracking. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. Pgodpfxez E Dytj Af Sot * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinge-type rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 30019513, CNC machining center Hedelius RS 505 K18 Magnum, Year of manufacture: 2012 with - Heidenhain control system - AME chip conveyor - Machine cooling system - Hedelius KM500 lubricant filtration system Pgodpfx Aoz E A Shsf Sjt The machine is available for purchase via online auction (due to insolvency) on our website. You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, starting at 6:00 PM.

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Pjdoz Er Hhspfx Af Ssgt Clamping devices: 6 clamps Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Thread cutting aluminum: up to M12 Thread cutting steel: up to M8

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Pgsdez Epg Eopfx Af Sot Blum laser 2 extraction systems Machine hood

Condition: excellent (used), Year of construction: 2012, operating hours: 78,733 h, functionality: fully functional, DMG / DECKEL MAHO DMF 360 linear Machine was overhauled in 2025 for approximately 60,000 EUR. 21,000 spindle operating hours Year of manufacture: 2012 Working area X: 3,600 mm Y: 1,100 mm Z: 900 mm Sliding table design 2 working areas for pendulum machining Removable working area partition Direct measuring systems Dynamics / Axes Linear drive X-axis Rapid traverse X/Y/Z: 80 / 60 / 60 m/min Psdpfxez Elfks Af Segt Acceleration X/Y/Z: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Swiveling head / Main spindle CNC swiveling head B-axis Speed range: 20–18,000 rpm Tool holder: HSK-A63 Holder according to DIN 69893 Power: 35 / 25 kW at 40 / 100 % duty cycle Tool magazine 60 tool positions Magazine design compatible with HSK-A63 / SK40 Chain magazine Double gripper Chip-to-chip time: 7.5 s Control system HEIDENHAIN iTNC 530 3D control smarT.NC ERGOline Control 19" screen Table / Rotary table Fixed table: 4,200 × 1,100 mm Integrated rotary table Rotary table Ø 1,050 mm Arranged on the left Max. load capacity: 1,200 kg Hydraulic clamping Hydraulic clamping 30–240 bar 2 circuits Coolant / Production Through-spindle coolant (TSC) 40 bar Coolant system 980 liters Chip conveyor Cooling nozzle Rotary union for spindle Compressed air for linear measuring systems Blow-out air through the spindle center Blow-out air selectable via M-function Maintained compressed air with low oil content Measuring technology Infrared measuring probe HEIDENHAIN TS 649 DMG Laser tool breakage measurement Additional standard equipment Automatic working area doors 2 rotating viewing windows 4-color signal light Electronic handwheel Operating mode 4 / Process monitoring Safety package in case of power failure Overvoltage protection Undervoltage monitoring Fast brake control Torque support HSK-A63 / SK40 / CAT40 Tool package for aluminum machining DMG Messenger Web DMG Netservice Client

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Pgsdpjz D Erusfx Af Sot Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Pgedpfx Aez D A Umef Sjt Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, Manufacturer: MAZAK Model: VTC-820/20 HD Year: 2017 Table size: 2500 x 820 mm X-axis travel: 2000 mm Y-axis travel: 820 mm Z-axis travel: 860 mm Control unit: Smooth G Spindle connection: Din-69871 Tool magazine capacity (automatic tool changer): 36 Chip conveyor: Yes, belt type High-pressure system through the spindle: 20 bar Spindle power (milling): 30 Kw Psdpfsz Dt E Nsx Af Sjgt Spindle speed (milling): 10,000 rpm Renishaw system: Yes, complete Automatic tool presetting: Yes, complete

Condition: excellent (used), Year of construction: 2018, operating hours: 1,700 h, functionality: fully functional, travel distance X-axis: 3,370 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, feed length X-axis: 90,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Osai, controller model: Open, spindle speed (max.): 24,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 12, type of input current: three-phase, Equipment: documentation/manual, ATHENA 3015, a 5-axis machining center for the processing of composite and plastic materials. Pedpfx Afsz Dtx Ae Sogt

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 2,200 – 100 • Continuous work table • Lateral and bottom reference stops • Gantry machine with Gandry system – Dual motorization • Milling unit with 4-axis electrospindle, HSD brand • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software Psdpfx Aez Dp Rbsf Ssgt

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 2,200 mm • Continuous working table • Lateral and bottom reference stops • Gantry machine with Gandry system – Dual motorization • Milling unit with 4-axis electrospindle, HSD brand Pjdpfx Afsz Dp Exo Sogt • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 2,500 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, overall weight: 19,000 kg, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details. - Voltage (Spannung): 400 V- Frequency: 50 Hz- Connected Load (Gesamtanschlußwert): 40 kVA- Machine Structure: Moving column / dual-workspace setup with central splash guard partition- Additional Equipment: Chip conveyor, hydraulic/coolant unit Pgodpfx Afez A Ugxs Set

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 220 297-0151, travel distance X-axis: 2,030 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller manufacturer: Heidenhain, table width: 780 mm, table length: 2,200 mm, overall weight: 11,600 kg, Equipment: chip conveyor, CNC vertical machining center TAJMAC-ZPS MCFV 2080 NT, year of manufacture 2001, Heidenhain control. Pgedpfxez A Uf Us Af Sjt Type MCFV 2080NT P26.00, No. 220 297-0151, weight 11,600 kg. Travel ranges X/Y/Z: 2,030 x 810 x 810 mm, table area 2,200 x 780 mm with 5 T-slots. Equipment: Full protective enclosure, chip conveyor with chip cart, electronic handwheel. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Condition: good (used), Year of construction: 2016, functionality: fully functional, DOOSAN VCF-850LSR – 5-Axis CNC Machining Center with Moving Column – Year 2016 – HEIDENHAIN TNC-640 X/Y/Z Travels: 3,000 / 850 / 800 mm B-Axis: +110° / -110° C-Axis: 360° continuous X/Y/Z Rapid Traverse: 40 m/min Main Table: 3,500 x 870 mm Table Load Capacity: 3,500 kg Integrated Rotary Table: Ø 800 mm Max. Workpiece Size: Ø 1,050 x H 680 mm Spindle: ISO-40, 12,000 rpm Spindle Power: 32/24 kW Torque: 126.27 Nm Tool Changer: 60 positions Dimensions: 5,440 x 3,795 x H 3,205 mm Weight: 24,000 kg Pgedpfx Afsz Atyms Set Machine is complete with chip conveyor, coolant tank with washing pumps, high-pressure through-spindle coolant system (CTS), linear scales on X/Y/Z axes, spindle cooling unit, Renishaw tool presetter and workpiece probe, mist extractor, three magnetic tables with zero-point clamping system, a set of tool holders and various tools, manuals, electrical diagrams, and EC/CE Declaration.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, overall weight: 20,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis FPT DINO was manufactured in 2002. It features an impressive X-axis travel of 2800 mm, Y-axis travel of 1600 mm, and Z-axis travel of 800 mm. The machine is equipped with a HEIDENHAIN TNC 530 control unit and a spindle speed of 20000 rpm. If you are looking to get high-quality machining capabilities, consider the FPT DINO vertical machining centre we have for sale. Contact us for further details. • Head type: Continuous 2-axis universal head • Power rating: 68.7 kW • Voltage: 380 V Pgsdpfoz Ar Ayox Af Sjt • Frequency: 50 Hz • CE mark: Yes Additional equipment • High-pressure coolant system (included) • Chip conveyor (included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2011, operating hours: 500 h, travel distance X-axis: 4,300 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 300 mm, overall weight: 1,950 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details. Pedpfsz Arucsx Af Ssgt - Operating Hours: Max 500 hours- Voltage: 400/3 V- Frequency: 50 Hz- Current: 16 A

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65086, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC530, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,900 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 700 mm Spindle speed: 6,000 rpm Tool interface: SK40 Number of tool magazine positions: 24 MACHINE DETAILS Pgsdpfx Afoz Apdnj Sjt Control system model: Heidenhain TNC530

Condition: used, Year of construction: 2001, functionality: fully functional, Mazak VTC-200C vertical machining center Year: 2001 Control unit: Fusion 640 Table size: 2000x510 mm X-axis travel: 1660 mm Pgodpfsz Akunsx Af Sot Y-axis travel: 510 mm Z-axis travel: 510 mm Maximum spindle speed: 10,000 rpm Maximum tool magazine capacity: 30 Automatic tool presetting Chip conveyor with belt Center partition

Condition: good (used), Year of construction: 2004, functionality: fully functional, Mazak vertical machining center Model: VTC 300 C Year: 2004 X-axis travel: 1740 Y-axis travel: 760 Pgedpfx Ajz Akpxof Sst Z-axis travel: 660 Table size: 2000 x 760 mm Spindle connection: ISO 40 Chip conveyor: Yes, belt type High-pressure system through the spindle: 15 BAR Number of tools (ATC magazine): 30 Rapid traverse rate, X-axis: 36,000 m/min Rapid traverse rate, Z-axis: 36,000 m/min Control unit: Mazatrol 640M Spindle speed (main spindle): 12,000 rpm Center partition: Yes

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, MAZAK moving column machining center VTC 530 Year 2021 Control unit: SMOOTH G X-axis travel: 1740 Y-axis travel: 530 Z-axis travel: 660 Table length: 2300 Table width: 760 Distance between the top of the table and the spindle nose: 180 Maximum workpiece size (length x width x height): 4100x905x790 Table surface: T-slot Maximum workpiece weight: 1400 Spindle speed: 12,000 rpm Spindle mount: ISO 40 Din Rapid traverse rate, X-axis: 42000 Rapid traverse rate, Y-axis: 42000 Pgodpszz Sutefx Af Sst Rapid traverse rate, Z-axis: 42000 Number of tools: 30 Coolant pressure: 25 Bar, additional tank Machine with 8,000 spindle hours, primarily used for aluminum machining.

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z: 2134 x 813 x 762mm, Table 2134 x 711mm, Spindle Speed 0 – 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 30 Station ATC, coolant, WIPS, low volt light, and 4th axis. Pgodpfxozzppuo Af Sst

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel distances: X-axis 2,600 mm Psdpozzl Ugsfx Af Ssgt Y-axis 750 mm Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,263 h, functionality: fully functional, machine/vehicle number: 1704080210, travel distance X-axis: 2,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,200 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 900 mm Pedpszy Ny Defx Af Ssgt Spindle speed, max.: 6,000 rpm Spindle mount: SK50 Spindle drive: Geared spindle / ZF gearbox Internal cooling through the spindle available Table load, max.: 3,000 kg Table size: approx. 2,350 × 850 mm T-slots: 5 × 22 mm Number of tool magazine positions: 40 Tool mount: SK50 Machine weight: approx. 23,000 kg Operating hours: approx. 5,263 h EQUIPMENT 3 tool carts with tools