Werny Maschinenhandel
Werny Maschinenhandel from Marsberg
Purchase and sale of machine tools, milling machines, lathes, and column drilling machines.
Brokerage of machine tools / CNC milling machines / lathes.
Werny Maschinenhandel
Mönchstr. 26
34431 Marsberg
Germany
Nordrhein-Westfalen
Current offers from similar dealers
Success:
Your message has been sent.
Listing
Eilenburg
18,242 km
Band saw
BEHRINGERHBP360-704GA
BEHRINGERHBP360-704GA
Call
Condition: good (used), Year of construction: 2002, Machine type: Automatic horizontal bandsaw
Working range 90° (round): Ø 360 mm
Working range 90° (square): 700 x 340 mm
Hnsds Aknfyepfx Af Tjw
Working range 75° miter cut right + left:
Ø 340 mm / 650 x 340 mm
Working range 60° miter cut right + left:
Ø 340 mm / 600 x 340 mm
Working range 45° miter cut right + left:
Ø 340 mm / 400 x 340 mm
Max. cutting diameter: 360 mm
Max. cutting width: 700 mm
Max. cutting height: 340 mm
Smallest section length: 35 mm
Smallest material dimension: 10 x 10 x 10 mm
Remaining piece length (manual): from 10 mm
Remaining piece length (automatic): from 160 mm
Band tension: 85 bar
Coolant tank: 150 l
Cutting speed: 19 - 130 m/min
Motor power (saw motor): 5.5 kW
Motor power (hydraulic pump): 5.5 kW
Motor power (coolant pump): 0.12 kW
Connected power: approx. 14 kW
Current consumption: 29 A
Supply voltage: 400 V / 50 Hz
Fuse rating: 35 A
Control voltage: 24 V DC
Cable cross-section: 4 x 6 mm²
Saw band dimensions: 6300 x 41 x 1.3 mm
Saw band length: 6300 mm
Saw band width: 41 mm
Saw band thickness: 1.3 mm
Weight (net): approx. 5800 kg
Material support height (table height): 800 mm
Success:
Your message has been sent.
Listing
Babberich
18,541 km
Band saw KASTO - KASTOtec A5
KASTOKASTOtec A5
KASTOKASTOtec A5
Call
Condition: excellent (used), Year of construction: 2010, power: 9.5 kW (12.92 HP), control type: CNC control, pivoting range: 530 °, total height: 2,800 mm, total length: 5,300 mm, total width: 2,800 mm, overall weight: 5,300 kg, Roller conveyor 6000 mm
Coolant spray nivelling
Sawing pressure device
Automat End \/ Back Stop
Capacity 90°: 530°
Cutting 90°: 530 x 630
Feed single stroke: 600mm
Feed multiple stroke:1500mm
Min. cutting length:6mm
Hnsdpj Akc R Dsfx Af Tew
Cutting speed Vario:12 - 120
Circle blade size: 7675 x 54 x 1,3mm
Power: 9.5kW
Chip conveyor: Yes
Length: 5300mm
Width: 2800mm
Height: 2800mm
Weight: 5300kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Success:
Your message has been sent.
Listing
Siedlce
17,614 km
Semi-automatic band saw machine
CORMAKBS320SA
CORMAKBS320SA
Call
Condition: new, Year of construction: 2026, The CORMAK BS320SA is an automatic metal band saw designed for batch cutting of steel pipes, bars, and profiles. Automatic material feeding, hydraulic clamping, and a programmable cutting cycle reduce the need for manual intervention between successive operations. The operator sets the required cutting length and number of pieces on the control panel, and the machine performs the programmed operating sequence. This solution streamlines the production of repetitive batches of material, particularly in manufacturing plants and workshops processing large quantities of identical components.
The feeding accuracy of ±0.2 mm and 300 mm feeding stroke ensure repeatable material positioning before cutting. Another advantage is the ability to perform straight and angled cuts at angles of up to 60°, expanding the machine's applications in the preparation of steel structural components. The 2.2 kW main motor, variable-frequency drive with stepless blade speed adjustment, and cooling system allow cutting conditions to be adapted to the type of material being processed.
Key Advantages of the CORMAK BS320SA Automatic Band Saw
- Automatic material feeding – eliminates the need to manually advance successive sections of material, improving efficiency when producing repetitive batches of components.
- Feeding accuracy of ±0.2 mm – supports precise material positioning and reduces variations caused by manual length measurement.
- 300 mm automatic feeding stroke – allows material to be advanced through successive feeder cycles, facilitating the execution of programmed cutting jobs.
- Automatic cutting cycle – includes material feeding, clamping, cutting, and saw arm return, reducing repetitive operator tasks.
- Hydraulic vice and saw arm control – automatic material clamping and controlled movement of the cutting assembly streamline the cutting cycle.
- Programmable cutting length and quantity – enables the production of batches of identical components according to manufacturing requirements.
- Variable-frequency drive with stepless blade speed adjustment – allows cutting parameters to be adapted to the type of metal being processed and the characteristics of its cross-section.
- Angle cutting up to 60° – enables the preparation of pipe and profile ends for structural, welded, and assembly connections.
Hjdpfx Ao Akc Hyof Tsnw
- Stable construction and cooling system – the machine's weight of 450 kg provides a solid base for the cutting assembly, while the 0.04 kW coolant pump helps dissipate heat from the cutting zone.
Technical Specifications – CORMAK BS320SA
Parameter Specification
Saw blade dimensions 2680 × 27 × 0.9 mm
Blade tensioning Mechanical (manual)
Saw arm descent adjustment Stepless – hydraulic cylinder
Vice base height 950 mm
Saw wheel diameter 300 mm
Power supply 3-phase, 400 V
Main motor power 2.2 kW
Coolant pump motor power 0.04 kW
Material feeding accuracy ±0.2 mm
Automatic feeding stroke 300 mm
Conveyor length 2450 mm
Dimensions 2000 × 860 × 1500 (1900*) mm
Weight 450 kg
Machine height with the saw arm fully raised.
Success:
Your message has been sent.
Listing
Monheim am Rhein
18,573 km
Band Saw - Automatic - Horizontal
AMADAHFA-1000 C II
AMADAHFA-1000 C II
Call
Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details
cutting diameter 1000 mm
saw band length 11100 mm
cutting width 1100 mm
total power requirement 20 kVA
weight of the machine ca. 14,5 t
Hnjdpfxe Akby Rj Af Tjw
dimensions of the machine ca. 5,4 x 3,2 x 3,9 m
Additional information
AMADA BAND SAW MACHINE MODEL HFA-1000 C II
A versatile, robust, fully automatic CNC-controlled machine for cutting solid material, shaped steel, steel bars, and tubes.
Thanks to the CNC control system, the optimal saw feed rate is automatically set after entering the material dimensions and selecting the appropriate material. Both bimetal and carbide saw bands can be used.
Cutting capacity:
Ø 1000 mm,
W 1100 x H 1000 mm
min. Ø 400 mm, W 400 x 100 mm
Hydraulic band saw tensioning (with band breakage and slippage monitoring)
Face parallelism monitoring
Motor power band drive: 11.0 kW
Hydraulics: 3.7 kW
Coolant: 0.36 kW
Cleaning brush: 0.09 kW
Band speed: 15 120 m/min (infinitely variable)
Tank capacity: 115 l (hydraulics)
250 l (coolant)
Saw band dimensions: 80 x 1.6 x 11,100 mm
Space requirements: Length 5.420 x Width 3.215 x Height 3.924 mm
Table height: 820 mm
Weight: 14,500 kg no foundation required
Roller type conveyor 1000 x 1200 x 500 mm high
Success:
Your message has been sent.
Listing
Germany
18,384 km
Band saw
BEHRINGERHBM 440 A
BEHRINGERHBM 440 A
Call
Condition: good (used), Year of construction: 2013, HYDRAULIC HIGH-PERFORMANCE BANDSAW LINE
MANUFACTURER: BEHRINGER
MODEL: HBM 440 A
YEAR OF MANUFACTURE: 2013
SAWING CAPACITY ROUND: 440 mm
SAWING CAPACITY FLAT (W x H): 440 x 440 mm
MINIMUM ROUND / FLAT: 15 / 12 x 12 mm
SAW BAND DIMENSION: 6700 x 54 x 1.3 mm
Hedpfx Afs Ait Afs Tenw
DRIVE POWER: 15 kW
CUTTING SPEED: 15 – 150 m/min
MATERIAL FEED LENGTH PER STROKE: 600 mm
MATERIAL FEED LENGTH (MULTIPLE): Max. 5400 mm
MACHINE WEIGHT: 4600 kg
DIMENSIONS (L x W x H): 2650 x 4150 x 2700 mm
TRANSPORT HEIGHT: 2700 mm
EQUIPMENT (INCLUDING):
COOLANT SYSTEM, 200 L
FULL GUARDING OF THE SAW
CHIP CONVEYOR
BEHRINGER NC CONTROL
SPEED-CUTTING PACKAGE + SV AUTOFEED CONTROL
CENTRAL LUBRICATION
COOLING UNIT FOR CONTROL CABINET
POWERED ROLLER CONVEYOR WITH ADJUSTMENT MECHANISM, 4200 MM LONG – INCLUDED FREE OF CHARGE
SHORT ROLLER CONVEYOR – NO EXTRA COSTS
MACHINE AVAILABLE FOR IMMEDIATE DELIVERY – SOLD AS IS
Success:
Your message has been sent.
Listing
Litija
18,332 km
Band saw
BlinBL-B43 CNC
BlinBL-B43 CNC
Call
Condition: new, Year of construction: 2022, machine/vehicle number: 22MB0042, functionality: fully functional, power: 9.5 kW (12.92 HP), input voltage: 380 V, type of input current: three-phase, cutting height (max.): 430 mm, cutting width (max.): 430 mm, control type: CNC control, total height: 1,650 mm, total length: 2,300 mm, total width: 2,720 mm, overall weight: 2,450 kg, Equipment: CE marking, documentation/manual, lighting, Machine is still new, originally packed in the store and never used. Blade 5150x41x1.3mm, hydraulic oil 70l, emulsion tank 100l, roller table 2m long.
Hnjdps Ahrhfjfx Af Tsw
Success:
Your message has been sent.
Listing
Rödermark
18,557 km
Hydraulic horizontal automatic bandsaw
WAGNERWPB 420 A
WAGNERWPB 420 A
Call
Condition: good (used), Year of construction: 1992, machine/vehicle number: 43817, Offer 26319
Technical data:
- Cutting range at 90° (round): 50 to 420 mm
- Cutting range (square): 420 x 420 mm
- Saw band dimensions (approx.): 6280 x 38 x 1.3 mm
- 6 cutting speeds: 16 x 105 m/min
- Cutting pressure, continuously adjustable: 0 - 400 mm/min
- Hydraulic material clamping
- Material feed automation: 8 - 520 mm
- Multi-stroke up to: 2080 mm
- Minimum remaining piece length: 70 mm
- Pre-selection of the saw band stroke height
- Chip conveyor
- Coolant system
- Total drive power: 400 V / 7.5 kW
- Space requirement (approx.): W 2900 x H 2700 x D 2400 mm
Hodpfx Aj Agvk Ssf Tenw
- Weight (approx.): 2900 kg
- Motorized feed roller runs: 3 x 2000 mm
- Total weight of roller runs (approx.): 1200 kg
Success:
Your message has been sent.
Listing
Günzburg
18,561 km
Band Saw
MEBAMEBAeco 410 DGA 2300
MEBAMEBAeco 410 DGA 2300
Call
Condition: used, Year of construction: 2008, dimensions of saw-band 5800 x 41 x 1,3 mm
Hodpe Agclwefx Af Tjnw
capacity 90 degrees: round 410 mm
capacity 90 degrees: flat 620 x 410 mm
rest piece length man./autom. 30 /160 mm
work height max. 750 mm
sawband speed 15 - 150 m/mm
rest piece length 75 mm
total power requirement 9,0 kW
weight of the machine ca. 3210 kg
dimensions 4500 x 2800 x 2000 mm
Success:
Your message has been sent.
Listing
Siedlce
17,614 km
Automatic column band saw
CORMAKH600SA przecinarka taśmowa do metalu
CORMAKH600SA przecinarka taśmowa do metalu
Call
Condition: new, Year of construction: 2026, CORMAK H600SA Automatic Metal Band Saw
The CORMAK H600SA automatic metal band saw is designed for cutting materials intended for further machining and production processes. The maximum cutting capacity is 600 × 600 mm. As a manufacturer, we offer this machine to metalworking facilities and companies looking to incorporate automatic cutting into their production operations.
Key Advantages of the CORMAK H600SA
- Maximum cutting capacity of 600 × 600 mm – an important parameter when selecting a band saw to match the dimensions of the materials to be processed.
- Three cutting speeds – allow the operating speed to be selected according to the requirements of the planned cutting process.
- Designed for solid materials – suitable for preparing material sections for subsequent production operations.
- Saw blade dimensions of 6620 × 54 × 1.6 mm – the specified dimensions facilitate the selection of compatible replacement blades and planning the purchase of spare blades.
Band Saw for Solid Materials – Applications
The CORMAK H600SA band saw for solid materials is designed to cut raw stock into sections required for individual production orders. The cut material can then proceed to subsequent operations, such as drilling or component assembly, according to the production process used at the facility.
This metal band saw is suitable for both in-house material preparation and contract machining services. When selecting a band saw, it is important to compare the maximum cutting capacity with the dimensions of the materials to be processed and the requirements of the planned operations.
Before discussing machine selection, it is advisable to prepare an overview of typical cutting tasks, including material types, dimensions, and required cutting lengths. This makes it easier to evaluate the H600SA's specifications in relation to the specific requirements of the workstation.
Hjdpe Ad Auaefx Af Tsnw
Three Cutting Speeds and Blade Selection
The H600SA offers three cutting speeds: 27, 45, and 69 m/min. When selecting the appropriate speed, consider the requirements of the material being processed and the recommendations for the saw blade being used. The available speed settings can be compared with the planned technological requirements before purchase to assess their suitability for the tasks performed at the facility.
The band saw uses a blade measuring 6620 × 54 × 1.6 mm. When ordering a replacement blade, make sure all three dimensions match. Providing the complete blade dimensions in your inquiry makes it easier to select a dimensionally compatible replacement. It is also advisable to specify the type of material to be cut to ensure the appropriate blade is selected for the intended application.
Main Drive, Hydraulics, and Cooling System
The main motor has a power output of 5.5 kW. The hydraulic power unit motor has a power output of 1.5 kW, while the coolant pump has a power output of 0.125 kW.
Technical Specifications of the CORMAK H600SA
Maximum cutting capacity 600 × 600 mm
Cutting speeds 27, 45, 69 m/min
Saw blade dimensions 6620 × 54 × 1.6 mm
Main motor power 5.5 kW
Hydraulic power unit motor power 1.5 kW
Coolant pump power 0.125 kW
Success:
Your message has been sent.
Listing
Haut-Mauco
19,540 km
SEMI-AUTOMATIC VERTICAL BAND SAW
BEHRINGERLPS-T
BEHRINGERLPS-T
Call
Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel
Motorized duplex brushing system
5.5 kW drive motor
Centralized lubrication system
Deviation control
Operator platform (work surface height -150 mm)
600 mm
1,270 mm
510 mm
10 to 110 m/min
Ball screw
CNC measuring device, cutting width 5 to 510 mm
Linear laser
Spraying gun
Chip conveyor (scrapers), height 1,200 mm
Stainless steel collection tray with grating
Electrical cabinet air conditioning
Hydraulic oil heater
Electrical cabinet pre-heating with thermostat
Light column
Lubricant flow control
Hsdpfxs Adufwo Af Tenw
Success:
Your message has been sent.
Listing
Achim
18,319 km
Band saw
BEHRINGERHBE 411 A Dynamic
BEHRINGERHBE 411 A Dynamic
Call
Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A – Dynamic, NEW MACHINE! – at a top price
Manual positioning 18
Cutting monitoring 22
Saw drive 5.2 kW 50-2
Chip conveyor 100 5
Micro 250
Package clamping device 440
Bar end detection 535
Retract cylinder 550
Clamping pressure regulation 832
Line laser 940
Illumination 941
Cutting channel extension
Behringer new machines: Come, see, buy
Hedpfx Ae Adpumjf Tonw
Immediately available from stock
Warranty from date of purchase
Do you have a breakdown? Replacement in the shortest possible time
Delivery and installation on request
Immediately available from stock
Success:
Your message has been sent.
Listing
Slavkov u Brna
18,089 km
Band saw
Pegas GondaPEGAS THOR 5
Pegas GondaPEGAS THOR 5
Call
Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 30 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 620 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,600 mm, total length: 3,940 mm, total width: 2,300 mm, overall weight: 7,700 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 5 | 2025 | TCT HIGH-PERFORMANCE SAW | 32% SAVING
TOP MODEL FROM PEGAS-GONDA – CNC HIGH-PERFORMANCE BAND SAW FOR CARBIDE-TIPPED SAW BLADES!
We offer a PEGAS-GONDA THOR 5, model year 2025, directly from our showroom.
The THOR 5 belongs to the top class of our production range. It was specifically developed for highly productive sawing of solid materials with carbide-tipped saw blades (TCT technology).
The extremely robust construction, the powerful 15 kW drive, and the intelligent cutting control enable high cutting performance, precision, and low vibration.
SPECIAL PRICE – 32.3% SAVING!
New price: 127,008 EUR
Our price: 86,000 EUR plus VAT
You save 41,008 EUR!
TECHNICAL DATA
Model year: 2025 – Demo machine
Fully automatic CNC two-column band saw
Cutting range, round: 550 mm
Cutting range, rectangular: 620 × 550 mm
Straight cuts 90°
Saw blade: 7680 × 54 × 1.6 mm
Band speed: 15–150 m/min
Main motor: 15 kW
Weight: approx. 7,735 kg
SIEMENS SIMATIC S7-1200 PLC
SIEMENS TP700 Comfort Touchscreen
Servo-controlled saw feed with ball screw drive
CNC material feed: 3–750 mm per stroke
Multiple feed: up to 19,999 mm
Hydraulic material clamping and band tensioning
HIGHLIGHTS OF TCT TECHNOLOGY
Optimized for carbide-tipped saw blades
Highly productive cutting of solid materials
Low-vibration, heavy-duty construction with polymer concrete filling
Automatic cutting control ASR (ARP/RZP)
Automatic cutting path control KKR
Automatic material feed and programmable cutting cycles
Integrated chip conveyor
Ideal for industrial series production
6 MONTHS MANUFACTURER'S WARRANTY
Hnode Aa Drfepfx Af Tew
Warranty on spare parts and labor. In the event of recognized warranty claims, the buyer only bears the travel and mileage costs of the technician.
Service rates:
Travel costs: 1 EUR/km (round trip)
Travel time: 25 EUR/hour
Technician labor: 50 EUR/hour (outside the warranty)
DELIVERY AND SERVICE
Price: 86,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020).
Immediately available!
We offer transport, installation, and operator training for an additional fee, according to our service rates.
ORIGINAL ACCESSORIES
Original PEGAS-GONDA accessories and roller conveyors available. We will gladly prepare an offer for a complete high-performance sawing station.
YOUR ADVANTAGES:
TCT high-performance technology
15 kW drive for demanding cuts
Fully automatic CNC operation
Directly from the manufacturer
41,008 EUR price advantage
6 months warranty
Immediately available
Contact us for more information or to arrange a viewing!
PEGAS-GONDA – directly from the manufacturer.
Success:
Your message has been sent.
Listing
Slavkov u Brna
18,089 km
Band saw
Pegas GondaPegas 540 Horizont X-CNC-M
Pegas GondaPegas 540 Horizont X-CNC-M
Call
Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | 44% DISCOUNT
EXCLUSIVE CNC DEMO MACHINE – MATERIAL FEED FROM THE LEFT – DIRECTLY FROM THE MANUFACTURER!
We are selling a fully automatic, two-column band saw, the PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom.
M = MIRROR (MIRROR VERSION)
This special version of the 540 HORIZONT X-CNC features a mirror-image material feed: the material is fed from the LEFT, rather than the usual right.
The perfect solution for production halls where space limitations prevent material feed from the right!
The machine offers full CNC control for angular positioning, material feed, and cutting.
Demo machine that has not been used in regular production. It is being sold due to the renewal of our showroom equipment.
SPECIAL PRICE – 44% DISCOUNT!
List price: 105,299 EUR
Our price: 49,000 EUR plus VAT.
You save 56,299 EUR!
TECHNICAL DATA
Model: 540 HORIZONT X-CNC-M (MIRROR)
Fully automatic CNC two-column band saw
Material feed from the LEFT
CNC-controlled angle adjustment: ±45°
Circular cut at 90°: 540 mm
Rectangular cut at 90°: 750 × 490 mm
Saw blade: 6880 × 41 × 1.3 mm
Blade speed: 15–150 m/min
Main motor: 5.5 kW
Weight: approx. 3,875 kg
SIEMENS SIMATIC S7-1500 PLC
SIEMENS TP700 Comfort Touch Screen
CNC-controlled
Material feed, Feed stroke: 2,000 mm
Multiple feeds: up to 19,999 mm
Servo-driven
Saw feed
Automatic cutting control (ASR)
Up to 100 cutting programs
6 MONTHS MANUFACTURER'S WARRANTY:
Warranty on parts and labor. In the event of a justified claim, the buyer only pays travel costs.
Hjdpfxe Aa Dmvj Af Tonw
Service charges:
Travel costs: 1 EUR/km (round trip)
Travel time: 25 EUR/hour
Technician's labor: 50 EUR/hour (outside of warranty)
DELIVERY AND SERVICE
Price: 49,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020).
Available immediately!
We offer delivery to the customer, commissioning, and operator training for an additional charge to our service fees.
ORIGINAL ACCESSORIES:
A wide range of original accessories is available (see accessories price list). For material feed from the left, we recommend suitable PEGAS-GONDA roller conveyors.
We will be happy to prepare a price offer for a complete cutting station.
YOUR ADVANTAGES:
Special MIRROR version with left-hand material feed.
Fully automatic CNC operation.
Directly from the manufacturer.
Price advantage of 56,299 €.
6-month warranty.
Original manufacturer's service.
Available immediately.
Contact us for a viewing or further information!
PEGAS-GONDA – directly from the manufacturer.
This advertisement was automatically translated. Translation errors may occur.
Success:
Your message has been sent.
Listing
Slavkov u Brna
18,089 km
Band saw
Pegas GondaPegas 540 Horizont A-CNC
Pegas GondaPegas 540 Horizont A-CNC
Call
Condition: new, Year of construction: 2025, machine/vehicle number: 5402612012, functionality: fully functional, operating hours: 12 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: PLC-controlled, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 2,500 mm, total length: 4,700 mm, total width: 6,000 mm, overall weight: 3,850 kg, table height: 810 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT A-CNC | 2025 | ONLY 12 HOURS OF OPERATION | 38% SAVING
CNC DEMO MACHINE DIRECTLY FROM THE MANUFACTURER – AVAILABLE IMMEDIATELY!
We are selling a fully automatic, two-column band saw PEGAS-GONDA 540 HORIZONT A-CNC, manufactured in January 2025, directly from our showroom.
Only 2 hours of operation! The machine was used exclusively for demonstration purposes and was never used in production. Selling due to replacement with a new showroom machine.
SPECIAL PRICE – 37.8% SAVING!
New price: 89,964 EUR
Offer price: 56,000 EUR plus VAT
You save 33,964 EUR!
TECHNICAL DATA
Year of manufacture: 01/2025
Hours of operation: 12 h
Fully automatic CNC two-column band saw
Bilateral miter cuts up to 60°
Round cut at 90°: 540 mm
Rectangular cut at 90°: 750 × 490 mm
Saw band: 6880 × 41 × 1.3 mm
Band speed: 15–150 m/min
Main motor: 5.5 kW
Weight: approx. 3,845 kg
MITSUBISHI PLC control
Automatic material feed with ball screw drive
Feed length per stroke: up to 2,000 mm
Multiple feed: up to 9,999 mm
Hydraulic material clamping and saw band tensioning
Automatic cutting cycle
6 MONTHS MANUFACTURER'S WARRANTY
We provide a 6-month warranty on spare parts and labor. In the event of a valid warranty claim, the buyer will bear the travel and transportation costs of the technician.
Service rates:
Travel costs: 1 EUR/km (round trip)
Travel time: 25 EUR/hour
Technician labor: 50 EUR/hour (outside the warranty)
DELIVERY AND COMMISSIONING
Price: 56,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020).
Machine available immediately!
We would be happy to offer transport to the customer, professional commissioning, and operator training for an additional fee, according to our standard service rates.
Hnjdpj Aa Dkhofx Af Tew
ORIGINAL ACCESSORIES
A wide range of PEGAS-GONDA accessories is available (see attached price list).
We particularly recommend our original roller conveyors for efficient material handling and automated sawing operations.
We will gladly prepare an offer for a complete sawing station.
YOUR ADVANTAGES:
Only 2 hours of operation, never used in production
Fully automatic CNC operation
Directly from the manufacturer
33,964 EUR price advantage compared to a new machine
6 months warranty
Original manufacturer service
Available immediately
Contact us for more information or to arrange a viewing!
PEGAS-GONDA – directly from the manufacturer.
Success:
Your message has been sent.
Listing
Lemmer
18,478 km
Bandsaw ø420 mm
BEHRINGERHBP420
BEHRINGERHBP420
Call
Condition: good (used), functionality: fully functional, cutting height (max.): 420 mm, cutting width (max.): 420 mm, control type: manual, Equipment: documentation/manual, motor brake, Cutting capacity 90° flat: 420 × 420 mm
Cutting capacity 90° round: ø 420 mm
Blade speed: Vario 17 – 110 m/min
Blade dimensions: 5800 × 38 × 1,3 mm
Hedpfx Afjz Tdgdo Tenw
Country of origin: Germany
Motor power: 5,5 kW
Machine (L×W×H): 300 × 220 × 190 cm
Machine weight: 3200 kg
Success:
Your message has been sent.
Listing
Mindelheim
18,568 km
Band saw
KASTOKASTOpos GA 4
KASTOKASTOpos GA 4
Call
Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4"
Fully automatic miter bandsaw machine – KASTO
Type/Model: KASTOpos GA 4
Condition: Used, partially overhauled in 2026
Year of manufacture: 2002
Work performed / partial overhaul
• Machine thoroughly cleaned and technically inspected
• Machine housing and machine body repainted
• Mechanical, hydraulic, and electrical functions checked
• Saw blade, material clamping device, and feed system checked and adjusted
• Band guide and all machine movements checked for proper function
Hodpjz Sqlkjfx Af Tenw
• Safety and control elements checked
• Necessary repair work carried out as part of the partial overhaul
• Final complete functional test performed
• Roller conveyor disassembled, cleaned, technically inspected, and repainted
• Rollers and bearing points of the roller conveyor checked
• Roller conveyor then reassembled and functionally tested
The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul.
Technical data
Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm
Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm
Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm
Cutting speed, stepless: 16 to 160 m/min, frequency-controlled
Material feed (single stroke): max. 750 mm
Shortest remaining piece length: Automatic: approx. 100 mm
Single cut: approx. 10-30 mm
Saw motor power: approx. 4.4 kW
Total connected load: approx. 7.4 kW (380 V / 50 Hz)
Machine weight: approx. 3,000 kg
Inquiry item: Shipping costs will be provided in a separate quote.
Success:
Your message has been sent.
Listing
Kirchardt
18,597 km
Band saw
Behringer GmbHHBM540A
Behringer GmbHHBM540A
Call
Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A
SpeedCutting Technology (optional)
By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used.
Prepared for Automation
A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals.
Servo Feed System
The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life!
Sensitive Behringer Cutting Pressure Control
increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely.
Optimal Chip Removal
The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers.
Economical Use of Carbide Saw Bands
due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal.
Precise Guide System in Portal Design
The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw.
Band-Guiding Parts Made of Gray Cast Iron
are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life.
Hodpfez Rzq Ijx Af Tenw
Automatic Guide Arm Adjustment
This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.
Success:
Your message has been sent.
Listing
Kirchardt
18,597 km
Band saw
Behringer GmbHHBE411A
Behringer GmbHHBE411A
Call
Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton
Band guide components made of gray cast iron
are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades.
Auto-Feed Control
Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed.
Hnsdez Rwx Iepfx Af Tsw
Energy efficient
The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model.
Precise guide system in portal design
The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw.
Electrically driven chip brush
with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected.
Servo feed system
The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life!
Automatic guide arm adjustment
This provides optimal sawing results without any adjustment effort - even with frequently changing material widths.
Easy operation
Quick and easy operation of all functions of the bandsaw via touch control.
Double clamping device
offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.
Success:
Your message has been sent.
Listing
Veldhoven
18,615 km
Band saw
KASTOMicut AE4.6
KASTOMicut AE4.6
Call
Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 6165011005, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 335 mm, cutting width (max.): 460 mm, pivoting range: 60 °, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,932 mm, total length: 2,763 mm, total width: 2,502 mm, overall weight: 2,100 kg, table height: 700 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, This machine has never been used in production and has only served as a demonstration model in our showroom.
New price: €50,900,- excl. VAT
Fixed selling price: €39,500,- excl. VAT
Fully hydraulic production band saw machine, heavy-duty design, for machining light to heavy materials, profiles, tubes, and solid stock in all grades. For both 90° and miter cuts.
The smooth swiveling of the sawing unit allows for stepless and quick adjustment of any desired miter angle, using a clearly readable adjustment scale: one-sided up to 60° (acute angle 30°). Straight cuts and miter angles up to +45° can be cut automatically. Angles larger than 45° up to 60° are cut in a semi-automatic cycle.
The stepless adjustable band speed and feed rate ensure the best results in terms of cutting performance and tool life.
The standard Advanced Control system offers optimal machine operation. 99 sawing programs (length/quantity combinations) can be easily programmed in advance. After the programmed number of pieces has been reached, the machine switches off automatically.
Hedpfx Afez I Tgzj Tenw
When used automatically, the minimum non-cutting time ensures maximum output. The precise ball screw drive in the material feed guarantees exact material length positioning.
Success:
Your message has been sent.
Listing
Oberweis
18,345 km
Industrial panel saw machine
BEHRINGERVPS60-220A
BEHRINGERVPS60-220A
Call
Condition: used, Behringer VPS60-220A - Industrial Plate Sawing Machine
The BEHRINGER VPS60-220A is a fully automatic industrial plate sawing machine / vertical bandsaw. It is designed for sawing large metal plates, slabs, and blocks across the grain – in particular, steel, aluminum, and other metals.
- Chip conveyor
- Safety device consisting of a safety fence and light barriers
- Staircase
- Operating manual and technical documentation
- Year of manufacture: 2015
Technical Data
- Cutting range (W x H): 2250 x 600 mm
- Minimum flat (W x H): 500 x 20 mm
- Maximum round: 500 mm
- Minimum remaining piece length in automatic operation: from 40 mm
- Minimum remaining piece length in manual operation: from 30 mm
- Saw band dimensions: 11080 x 54 x 1.6 mm
- Cutting speed: 17 – 120 m/min
Hsdpfx Afez H Ac Ne Tsnw
- Material support height: approx. 1650 mm
- Quantity of coolant: approx. 250 l
- Motor power – sawing drive: 7.5 kW
- Motor power – hydraulic pump: 2.2 kW
- Motor power – coolant pump: 0.33 kW
- Motor power – chip conveyor: approx. 0.25 kW
- Connection value: approx. 15 kW
- Voltage: 400 V, 50 Hz
- Control voltage / hydraulic valve voltage: 24 V = (DC)
- Current consumption: approx. 35 A
- Fuse rating: 50 A
- Minimum cable cross-section: 35 mm²
- Machine dimensions W x H x D: 17793 x 9817 x 4500 mm
- Weight (net): approx. 19000 kg
Success:
Your message has been sent.
Listing
Oberweis
18,345 km
Vertical metal band saw
BEHRINGERLPS60-T
BEHRINGERLPS60-T
Call
Condition: used, Year of construction: 2017, Behringer LPS 60-T - Vertical metal bandsaw
- Year of manufacture: 2017
- Operating hours of the saw drive: 32441 h
- Rigid saw frame in C-design, minimizing torsion and vibration
- Robust gearbox with appropriate gear ratio and drive with higher power (saw drive 5.5 kW / band speed 10-110 m/min)
- Designed for saw blades with the dimensions 54 x 1.6 mm, primarily for cutting difficult-to-machine materials and larger dimensions
- 2 saw blade wheels with wear-resistant running surface
- Combined roller and hydraulically pre-tensioned carbide sliding guide for the saw blade
- Hydraulically controlled saw blade tension, electrically monitored with automatic pressure reduction when the machine is at a standstill
- Automatic shutdown in case of saw blade breakage
- Saw blade drive with frequency converter
- By opening the door, the blade change can be carried out effortlessly and without tools by one person. Blade change time approx. 2 minutes
- Saw blade cleaning by rotating double brush Ø100 mm
- Cutting deviation for normally machinable materials within 0.1 mm per 100 mm cutting height
- Heavy-duty, torsion-resistant machine stand in box design
- Chip conveyor with separate electric drive
- Hydraulic system designed in a block construction
- The material support table is mounted on linear guides and can be moved via servo drive
Technical data
- Working area L x W x H: 1260 x 720 x 600 mm
- Minimum material height: 10 mm
- Minimum section width: 5 mm
- Inner table support area: approx. 1260 x 680 mm
- Inner table max. load: 3000 kg
- Outer table support area: approx. 1260 x 680 mm
- Outer table max. load: 3000 kg
- Material support height approx.: 1050 mm (including base pan)
- Cutting speed: 10 - 110 m/min
- Saw blade dimensions: 5400 x 54 x 1.6 mm
- System or band tension pressure: 85 bar
- Quantity of coolant: approx. 100 l
- Motor power - saw drive: 5.5 kW
- Motor power - hydraulic pump: 2.2 kW
- Motor power - coolant pump: 0.15 kW
- Motor power - chip conveyor: approx. 0.26 kW
Hnedpsz H Ac Ajfx Af Tsw
- Connected load: approx. 11.5 kW
- Voltage: 400 V, 50 Hz
- Control voltage / hydraulic valve voltage: 24 V = (DC)
- Current draw: approx. 31 A
- Fuse rating: 35 A
- Conductor cross-section: min. 10 mm2
- Machine dimensions W x H x D: 3150 x 2970 x 2500 mm
- Weight (net): approx. 3200 kg
Success:
Your message has been sent.
Listing
Oberweis
18,345 km
Band saw
BEHRINGERLPS40-4
BEHRINGERLPS40-4
Call
Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw
- Year of manufacture: 2014
- Hydraulic band tensioning
- Servo-controlled feed
- Robust C-frame
- Cutting monitoring system
- Coolant cleaning gun
- Coolant spray and lubrication device
- Guide arm
- Material stop with mm graduations
- Laser for cut line projection
- Material table base unit (external table)
- Manual material stop (internal table)
- Platform for operator
- Roller conveyor segment, raising
- Roller conveyor segment, raising with drive
Technical data
- Working area (L x W x H): 4000 x 680 x 400 mm
- Minimum cut height: 10 mm
Hnodoz H Acpjpfx Af Tsw
- Minimum cut width: 15 mm
- Internal table support area: approx. 680 x 4000 mm
- Internal table max. load: 7500 kg
- External table support area: approx. 680 x 4000 mm
- External table max. load: 9500 kg
- Material support height: approx. 1385 mm
- Cutting speed: 17 - 120 m/min
- Saw blade dimensions: 5400 x 54 x 1.6 mm
- System / band tension pressure: 85 bar
- Coolant quantity: approx. 250 l
- Motor power - saw drive: 5.5 kW
- Motor power - hydraulic pump: 2.2 kW
- Motor power - chip conveyor: approx. 0.26 kW
- Connected load: approx. 11 kW
- Voltage: 400 V, 50 Hz
- Control voltage / hydraulic valve voltage: 24 V = (DC)
- Current consumption: approx. 25 A
- Fusing: 35 A
- Wire cross-section: min. 10 mm2
- Machine dimensions W x H x D: 6450 x 2870 x 2350 mm
- Weight (net): approx. 10000 kg
Success:
Your message has been sent.
Listing
Ahaus
18,488 km
Band Saw
MEBA - VollautomatE-CUT 400 A
MEBA - VollautomatE-CUT 400 A
Call
Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm
capacity 90 degrees: flat 500 x 400 mm
saw band length 6220 x 41 x 1.3 mm
speed 15.0 - 150 m/min
work height max. 750 mm
workpiece weight ca. 250 - 300 kg/m
Control MEBA NC
coolant tank capacity 80.0 ltr.
oil volume 30.0 ltr.
power capacity 5.5 kW
weight of the machine ca. ca. 2250 kg
range L-W-H 3100 x 1620 x 2150 mm
Current list price: approx. 50.000 euros
Special price available upon request
Features:
- MEBA - Fully automatic "two-column linear guide system"
* Fully automatic machine for 90° cuts only
- User-friendly NC dialog control
* With plain-text display 5.7-inch CE panel
* Program memory with 50 programs, each with 20 steps
- Automatic material feed
* Minimum cutting diameter .. Ø 5.0 mm
* Residual piece length without bundle clamping .. manual 25.0 mm
* Residual piece length without bundle clamping .. automatic 110 mm
Hedpfx Afoz Dkzus Tenw
* Automatic movement of the clamping blocks
- Rapid-feed lowering of the saw frame
* With automatic material detection
- Band saw speed via frequency-controlled AC drive (15-150 m/min)
- Automatic cutting pressure and feed monitoring
- Driven chip-clearing brush via friction wheel
- Hydraulic full-stroke material clamping
- Saw blade angled 3° relative to the material support surface
- Saw blade idler rollers with carbide guides
- Manual saw blade tensioning
- Removable coolant tank for easy cleaning
- Operating instructions
Success:
Your message has been sent.
Listing
Emmendingen
18,735 km
Band saw
KaltenbachKBS 400 DG-NA
KaltenbachKBS 400 DG-NA
Call
Condition: used, Year of construction: 2009, type of input current: three-phase, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, cutting range round steel at 90°: 360 mm, feed length X-axis: 2,600 mm, opening width: 400 mm, saw band length: 5,730 mm, saw band width: 34 mm, saw drive: 3,000 W, working height: 720 mm, For sale is a fully automatic horizontal metal bandsaw from the manufacturer Kaltenbach, model KBS 400 DG-NA, manufactured in 2009.
The machine is suitable for sawing steel, cast iron, non-ferrous metals, as well as pipes, profiles, and solid material. The automatic material feed and hydraulic workpiece clamping enable efficient and precise series production. The cutting speed and hydraulic saw feed are continuously adjustable. Miter cuts are also possible.
Technical data:
Manufacturer: Kaltenbach
Model: KBS 400 DG-NA
Year of manufacture: 2009
Machine number: 305285
Cutting range, round, at 90°: 360 mm
Cutting range at 90°: 400 × 350 mm
Cutting range at 45°: 280 × 350 mm
Saw band dimensions: 5,730 × 34 × 1.1 mm
Cutting speed: 15 to 90 m/min
Working feed: continuously adjustable up to 400 mm/min
Feed length per single stroke: 2,600 mm
Saw drive: 3 kW
Working height: 720 mm
Dimensions: approx. 2,710 × 1,200 × 2,150 mm
Hnodpfjzmf Uqjx Af Tow
Weight: approx. 2,300 kg
Success:
Your message has been sent.
Auction
Auction ended
Nordrhein-Westfalen
18,578 km
Band saw
KALTENBACHKBR 460 NA
KALTENBACHKBR 460 NA
Condition: good (used), Year of construction: 2002, machine/vehicle number: 122668, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 600 mm, saw band length: 7,470 mm, saw band width: 54 mm, section length (max.): 760 mm, section length (min.): 8 mm, TECHNICAL DETAILS
Saw Blade
Dimensions: 7,470 x 54 x 1.3 mm
Cutting speed: infinitely variable (approx. 1:7)
Working Area
Material diameter - round material: max. Ø 460 mm
Material dimensions - square material (w x h): max. 600 x 460 mm
Cut-off length - single stroke: min. 8 mm, max. 760 mm
Cut-off length - multiple strokes: min. 8 mm, max. 9,999.9 mm
Minimum part length in automatic mode: 90 mm
Working Height
Working height: 720 mm
MACHINE DETAILS
Dimensions & Weight
Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm
Width with chip conveyor (option): 4,650 mm
Weight: approx. 6,000 kg
Hedpfx Aezmdrnjf Tsnw
Electrical Data
Main motor: 7.5 or 9.2 kW
Hydraulic motor: 2.2 kW
Saw drive motor: 0.18 kW
Coolant pump: 0.19 kW
Chip conveyor (option): 0.18 kW
Roller conveyor drive (option): 0.8 kW
NC positioning drives (option): 0.37 kW








































































































































































































