Bf Plastiques

Condition: good (used), functionality: fully functional, mileage: 102,760 km, power: 140 kW (190.35 HP), first registration: 07/2016, fuel type: diesel, overall weight: 8,750 kg, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, number of seats: 7, loading space length: 6,490 mm, loading space width: 2,100 mm, loading space height: 500 mm, Equipment: ABS, airbag, electronic stability program (ESP), power assisted steering, truck registration, Mercedes-Benz Sprinter 519 CDI Doka Mini-Semi with Trailer and Detachable Platform Engine: 6-cylinder, 2,987 cm³, 140 kW/190 hp 6-speed manual transmission Euro 6 standard AdBlue tank ASR/ABS Toll system preparation Tachograph for driver card Doka: 7 seats Fifth wheel coupling Compressor for two-circuit compressed air brake system Mini semi-trailer with trailer 1-axle semi-trailer Pagenkopf MSL 6 Air suspension with raising/lowering function BPW axles Permissible total weight of the vehicle combination: 8,750 kg (unladen weight as a unit: 4,210 kg) Cargo space dimensions: L 6.49 m, W 2.10 m, H 0.50 m Doka platform truck Detachable platform with quick-release fasteners Platform dimensions: L 2.92 m, W 2.11 m, H 0.40 m Todpfxj Ahhxme Apded

Condition: good (used), Year of construction: 2006, Channel baling press Presona LP 80 VH1 with Wirbulator, year of manufacture 2006, refurbished. Technical data: Manufacturer: Presona Sweden Type: LP 80 VH1 Year of manufacture: 2006 Pressing force: 78 t Drive power: 55 kW Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: approx. 450-600 kg Throughput capacity with a bulk density of: 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW (municipal solid waste): 20-27 t/h Tying: 5-ply vertical Weight: approx. 25000 kg Note: The press has been refurbished by us. The following work was carried out: Press cleaned and repainted Piston rod refurbished Steel structure on the press body New Hardox wear plates for the press bed Replacement of: Shaft for wire control Chain for wire pull Wire pull needles Wire guide rollers Running wheels Guide rails Hydraulic hose lines Hydraulic seals Oil temperature sensor Photo cells in the feed hopper Tsdpfx Apo Ahhxiodsd Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00728, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-60/2.05 manufactured in 2017.09. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Todo Ahhw Tspfx Apdod Model: IRB 4600-60/2.05 Model Number: IRB Year of Manufacture Robot: 2017.09 Warranty term (months): 12   Payload (kg): 60 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2017.09 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: ready for operation (used), total length: 15,000 mm, total width: 8,000 mm, total height: 4,000 mm, Capacity: 60 tons per hour. Tjdpfx Aj Ahhwlepdod

Condition: used, Year of construction: 2015, The lot consists of: Regrind dryer SCR-2500U-CE SHINI; S/N 2CR14080001; 2014; 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg Gravimetric feeder DBW-G1-350N-100 Brabender; max. pressure 2 mbar; 230/400 V; < 70 dB(A) Extruder drive motor ELIN MKH831C04 Elin Motoren; S/N 50667613001; 277 kW; 300-1,960 rpm; approx. 1,400 kg DESCH clutch PPF-142RA1-Kado08E2 Extricom; S/N 13063840; 180 kg; release torque 2,022 Nm; max. 2,500 rpm Gearbox RE5XP PGL41,5 Eisenbeiss; S/N W_K 706419/10/1; 2013; 255 kW; 1,961 rpm input / 400 rpm output; 200 l oil capacity; 2,750 kg 12-screw extruder with vacuum system Extricom; 2015; RE5 XPV-28D; 5,360 x 1,380 x 2,410 mm; 3 x 400 V; max. 400 A; 8,500 kg (technical details – download PDF in "Essential information") Melt pump GPE 90/90-03 Nordson; S/N 26837/B; 2014; 66.3 kW Continuous screen changer K-SWE180-4K/RS Nordson; S/N 26837/d; 2014; 1,500 kg/h; max. 500 bar; max. 300 C Underwater pelletizer PoDV 6 TM Gala; S/N 11430294; 2015; 740 kg Vibrating crystallizer WR 16/6-DV Vibrotechnik; S/N 5818001; 2014; 1,900 mm length; 1,600 mm diameter Bagging unit Double/Small/P R&K; S/N 100004/2014; approx. 3,153 x 1,800 x 3,180 mm Extrusion control cabinet MX Multi-Eco 4V315-S1136 Schneider Electric; S/N 1411738; control cabinet Tjdpfx Ao Ahhwdopdsd Technical Details: 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart Todpe Ahhu Uofx Apdjd + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection Tsdpfxj Ahhuus Apdsd -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: used, Year of construction: 1995, Suitable for regrinding and reworking of wood and metalworking tools of all kinds. Accessories: Software package 1 (cylindrical tools sharp-edged, corner and full radius), Software package 2 (conical-spiral tools sharp-edged, corner and full radius), Software package 3 (drill and step drill), Software package 16 (warming-up program), Heli-Flute & Cone (span layout calculation program for cylindrical and conical cutters), Pneumatic workpiece clamping, Machine light, Measuring probe, Coolant tank 180 L. X-axis longitudinal movement: 400 mm Y-axis vertical movement: 250 mm Tjde Ahhumspfx Apdjd Z-axis (transverse movement): 580 mm Z-axis (lateral movement): 580 mm C-axis swivel range: +/- 200° Workpiece holder: ISO 50 Workpiece diameter: 260 mm max. workpiece length: 270 mm Max. Workpiece length: 270 mm Grinding wheel RPM continuously adjustable: RPM. Grinding wheel drive power: 10 kW Grinding wheel speeds infinitely variable: 0-10,000 rpm. Grinding wheel diameter: Max. 200 mm Connected load: 15 kVA (400 V / 50 Hz) Dimensions W x D x H: 1960 x 2010 x 2500 mm Weight approx.: 3100 kg colour: gray RAL 7035

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00731, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Tedpfxo Ahhuie Apdod Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, mileage: 588,400 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, empty load weight: 14,930 kg, maximum load weight: 11,070 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 7,700 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGX 26.500 6x2-4 flatbed truck with crane First registration: 9/2018 588,400 km with documentation Powerful 500 hp engine with 12,419cc displacement Euro 6 emission class Long-haul driver's cab with 2 beds Automatic transmission Retarder Air conditioning, auxiliary heater Lane keeping assist Adaptive cruise control Trailer coupling 6x2*4 drive Full air suspension 3rd axle steerable and liftable Tires 315/80 R22.5, approximately 50% tread on aluminum rims Wheelbase 4800mm Flatbed 7700mm Side walls 1000mm Unladen weight 14,930 kg Crane MKG HLK 195 HP a3 High-seat control (top seat control) Including rotator! Including gripper! 2-point support 3 hydraulic extensions 4.25m / 4290kg Tsdps Ahht Nsfx Apded 6.20m / 2800kg 8.15m / 2110kg 10.10m / 1670kg Hook height approx. 14 meters German vehicle, first owner, in good condition. Export/net price: 34,900 Euro All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 588,400 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, empty load weight: 14,930 kg, maximum load weight: 11,070 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 7,700 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGX 26.500 6x2-4 flatbed truck with crane First registration: 9/2018 588,400 km with documentation Powerful 500 hp engine with 12,419cc displacement Euro 6 emission class Long-haul cab with 2 beds Automatic transmission Retarder Air conditioning, auxiliary heater Lane keeping assist Adaptive cruise control Trailer coupling 6x2*4 drive Full air suspension 3rd axle steerable and liftable Tires 315/80 R22.5, tread depth approx. 50% on aluminum rims Wheelbase 4800mm Flatbed length 7700mm Side boards 1000mm Unladen weight 14,930 kg Crane MKG HLK 195 HP a3 High seat control Including rotator! Todps Ahht Tofx Apded Including grab! 2-point support 3 hydraulic extensions 4.25m / 4290 kg 6.20m / 2800 kg 8.15m / 2110 kg 10.10m / 1670 kg Hook height approx. 14 meters German vehicle, first owner, in well-maintained condition. Export / net price: 34,900 Euros All information without guarantee, errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, power: 8,000 kW (10,876.96 HP), rotational speed (min.): 1,493 rpm, input voltage: 10,000 V, input frequency: 50 Hz, input current: 539 A, type of input current: three-phase, overall weight: 18,330 kg, protection type (IP code): IP54, Siemens motor, 10 kV Year of manufacture: 1988 (rewound in 1998) Tsds Ahht Espfx Apdjd

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2003, loading space length: 16,580 mm, loading space width: 2,550 mm, loading space height: 2,200 mm, total length: 16,580 mm, total width: 2,550 mm, total height: 2,200 mm, suspension: air, tire size: 245/70-R17.5, Equipment: ABS, = Additional Options and Accessories = Todj Ahhtzspfx Apdjd - Sideboards - EBS - Air suspension - Drum brakes = Notes = Very nice (recently renovated) 2003 FAYMONVILLE MULTI STZ-2A 2-axle low-bed trailer with ABS/EBS, SAF axles with drum brakes, hydraulic steering, air suspension, extendable by 500 cm, loading platform height: 85 cm, 3 x 2-inch twist locks, 2 x 6-inch stake pockets + 8 stakes, various lashing points, 4 x width markers, unladen weight: 9,140 kg, permissible total weight: 38,000 kg, tires 245/70-R17.5 (tread depth left: 6/10, 7/9 mm; tread depth right: 8/8, 10/9 mm), Belgian registration with a valid main inspection until 26.11.2026. = Further Information = General Information Year of manufacture: 2003 Axle Configuration Tire size: 245/70-R17.5 Axle brand: SAF Drum Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 40%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered; Tire tread depth left inner: 55%; Tire tread depth left outer: 45%; Tire tread depth right inner: 55%; Tire tread depth right outer: 60% Weights Unladen weight: 9,140 kg Payload: 28,860 kg GVWR: 38,000 kg Functional Body brand: FAYMONVILLE STZ-2A Loading platform height: 85 cm Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2024, For sale is a used MIDI PRO bench lathe set in demonstration condition. The machine has been used only sparingly and is in very good technical and optical condition. This compact, yet extremely stable, bench lathe is perfect for bowls, boxes, small vases, and precise turning work. Thanks to the rotatable and adjustable headstock, it offers particularly versatile applications and ergonomic working. Ideal for ambitious hobby turners as well as professional users looking for a powerful and space-saving lathe. Technical data: - Center height approx. 178 mm (turning diameter approx. 355 mm over bed) - Center distance approx. 450 mm (extendable) - Speed ranges 60–1000 / 150–1900 / 350–3700 rpm - Motor 1 HP / 0.7 kW – 230 V - Spindle connection M33 x 3.5 (MK2) - Tailstock MK2 with 100 mm quill travel - Forward and reverse operation - Stable construction, machine weight approx. 67 kg - Incl. machine stand (legs) Advantages: - very compact, stable bench lathe Tedpo Ahhtwjfx Apdod - ideal for precise turning work - versatile due to rotatable headstock - perfect for hobby and professional workshops The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, turning lathe, wood turning lathe, turning, turning tools, wood turning, machine

Condition: used, total height: 1,990 mm, overall weight: 3,300 kg, total length: 3,559 mm, total width: 2,280 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, SPALECK SELO 1600 × 3000 Vibrating Screen – Used Industrial SPALECK vibrating screen, model SELO 1600 × 3000, designed for screening and separating materials. Technical specifications: - Nominal screening area: 4.8 m² (1600 × 3000 mm). - Screening system using 3D panels. - One screening deck. - Inclination: 8°. - Drive system with two 7 kW motors. Tjdps Ahhtpofx Apdod - Total installed power: 14 kW. - Electrical supply: 400 V / 50 Hz, three-phase. - Rated motor speed: 750 rpm. - Motor protection: IP66. - Dimensions: 3559 × 2280 × 1990 mm. - Weight without structure: 3300 kg. - Construction in S235 JR G2C steel. - CE marking. Technical documentation and operation and maintenance manual available. Please inquire about availability, operating condition, and sales terms.

Year of construction: 2026, condition: used, Suitable for measuring tooth tips and tooth back on circular saw blades of all kinds within 1 minute. Equipment: Tjdpfx As Ahhtlepdjd Saw blade cone mount, bore from 15 to 50 mm Digital display Circular saw blade diameter: 80 - 650 mm Zoom factor: 10x Distortion:

Condition: good (used), functionality: fully functional, Internal article number: 26102 Universal tool grinding machine Deckel S1 Tsdo Ahhtaopfx Apdod The machine is fully functional and can be inspected under power by arrangement in our heated warehouse, which covers an area of over 500 m².

Condition: good (used), For sale: Precision table saw ULMIA 1711 with cross-slide carriage. Ideal for model makers, workshop use, or ambitious DIY enthusiasts. Rip fence extendable up to 250 cm and adjustable in both directions up to 45°. Saw blade can be tilted up to 45°. Equipped with a feeding mechanism. Tjdpfxo Ahhrys Apdod Features an integrated dust extraction fan that automatically switches on when the saw is turned on.

Year of construction: 2026, condition: used, Suitable for measuring tooth tips and tooth back on circular saw blades of all kinds within 1 minute. Todpfxs Ahhrro Apded Equipment: Saw blade cone mount, bore from 15 to 50 mm Digital display Circular saw blade diameter: 80 - 650 mm Zoom factor: 10x Distortion:

Condition: new, functionality: fully functional, machine/vehicle number: NM0KCTP68XSK97607, mileage: 791 km, power: 375 kW (509.86 HP), first registration: 10/2026, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/65 R22.5 + 315/80 R22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 1,050 l, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: air, number of beds: 1, total length: 5,877 mm, total width: 2,540 mm, total height: 3,962 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, trailer coupling, Ford F-MAX 510 – 4x2 tractor unit – Moondust Silver Technically new: first registered 26/10/2026, 791 km. Available immediately in Geel, Belgium. EQUIPMENT ▪ Ecotorq 12.7 L – 375 kW / 510 hp – 2,600 Nm – Euro 6 ▪ Ecotorq 16-speed automated gearbox + hydraulic retarder (intarder, 450 kW) ▪ Luxury Pack: LED projector headlamps, front air suspension, wireless charger, ambient lighting, Security Lock, air horn ▪ Technology Package 4: adaptive cruise control (ACC) ▪ 4-bellow rear air suspension – side skirts – exterior sun visor ▪ NH4C gearbox PTO ▪ Continental wide-base tyres 385/65 R22.5 front, 315/80 R22.5 rear – steel wheels ▪ Wheelbase 3,600 mm – fifth wheel height 1,200 mm – 1,050 L diesel – 78 L AdBlue ▪ Extra-high-roof sleeper cab – Moondust Silver metallic paint ▪ Navigation, 12" digital cluster, 12.4" touchscreen with Apple CarPlay and Android Auto, parking heater, 38 L fridge ▪ Safety: emergency braking, blind spot information (BLIS), MOIS, lane keeping alert, traffic sign recognition, Predictive Cruise Control WARRANTY 3+2 YEARS INCLUDED 3 years on the complete vehicle + 2 years on the driveline, up to 150,000 km per year, from 26/10/2026. ConnecTruck included for the duration of the warranty. PRICE 90,940.80 € excl. VAT Hire-purchase available for Belgian customers: from 2,125 € excl. VAT per month over 60 months, including maintenance, liability insurance and road tax. Tsdpfx Apo Ahhrnsdsd Ford Trucks Belux – authorised Ford Trucks dealer and repairer – Antwerpseweg 66, 2440 Geel, Belgium

Condition: used, The lot consists of: Todps Ahhqbefx Apdod (1) 5 m3 buffer tank FV310T; Foras; 2.2 kW; 3 x 400 V; 200-900 l/min (1) Flocculant mixing system CHU-F 0.5; Vodatech; Serial No. 683; 2014; 0.5 m3 solution tank; 1 m3 storage tank (1) Chemical dosing pumps TR 63B4; Bonani; Acid and coagulant dosing pumps (1) Air blower 1015; Vodatech; Serial No. 014-14; 2014; Max. 6 bar; operating temperature 40°C (1) DAF wastewater flotation unit UF-60; Vodatech; 2014; 15 m3; 15.25 kW; approx. 5.7 x 2.9 x 2.8 m; 2,600 kg empty / 17,600 kg filled

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 51308589, overall weight: 205 kg, total width: 772 mm, total length: 1,695 mm, total height: 1,090 mm, power: 118.5 kW (161.11 HP), Instruments protected from damage by a special housing. Oil hose connections with quick-release couplings (on both sides). Devices can be stacked and lifted with a crane. Todpfx Aj Ahhppjpdod Localized heating for outdoor workplaces and winter construction sites. Heating and ventilation for tents and trade fair events. Heating of workshops, warehouses, craft businesses, and storage rooms. Heating of greenhouses, livestock sheds, and farm buildings. Drying of grain, fruit, etc.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,822 h, functionality: fully functional, machine/vehicle number: P2414C718, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, total height: 1,970 mm, total length: 2,120 mm, total width: 1,970 mm, wire diameter (max.): 0.253 mm, workpiece height (max.): 250 mm, workpiece width (max.): 630 mm, workpiece length (max.): 730 mm, type of input current: AC, table width: 440 mm, overall weight: 2,200 kg, table length: 626 mm, input voltage: 400 V, tank capacity: 520 l, travel speed (max.): 2,000 mm/min, input frequency: 50 Hz, input current: 32 A, positioning accuracy: 0 mm, Equipment: cooling unit, documentation/manual, The machine has undergone a general overhaul, and the water system has been cleaned. The machine is equipped with new, original precision diamond guides (0.253), new feeders, all bearings, cutting contacts, encoder batteries, parameter backups, filters and a detection unit. The system has been updated to the latest version. The machine comes with a complete set of standard accessories: flushing nozzles, wire alignment jig, clamps, etc. Tedpfx Aj Ahhn Iepdjd

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,700 kN, Hydraulic injection moulding machine manufactured in 2005. This SANDRETTO 2480/270 features a clamping force of 270 T and includes a complete 16-cavity mold. The preform weights are 53 g or 66 g with a neck finish of 36/29. The machine is currently connected and operational, ensuring reliable performance. If you are looking to get high-quality PET preform production capabilities, consider the SANDRETTO 2480/270 machine we have for sale. Contact us for further details. • Condition: Currently connected and in operation; fully operational and running Tedpj Ahhnnofx Apdsd Additional equipment • Complete 16-cavity preform mold: • Neck finish: 36/29 • Preform weights: 53 g or 66 g • Piovan dryer • EISBAR mold temperature conditioner

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Okuma Type: FUB-P4R2 Version 2.0 Article number: 1911-2242 Opus 7000 Tjdpfs Ahhngox Apdsd Condition: Used, but in good condition and fully functional.