Geserco

Condition: good (used), Year of construction: 1989, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: EBU, Single-column eccentric press type EBU H100F -Pressure capacity: 100 tons -Clutch: hydraulic -Drive: 4.5/6.9 kW 1440/2890 rpm -Stroke rate: 66/100 rpm -Stroke: adjustable 20-140 mm -Pushrod adjustment: 100 mm -Table size: 890 x 620 mm Bwsdpfx Aoz Hyvgemrju -Table cutout: Ø 290 mm -Protrusion: 320 mm -Punch holder: Ø 50 mm -Insertion height: 480 mm -Dimensions: 1500/2200/H2770 mm -Weight: 6500 kg

Condition: used, Year of construction: 2001, pressing force: 60 t, 60-ton eccentric press with lower die clamp Additional safety fuse Bodoz Hlf Tjpfx Amrswu Non-material barrier to be checked.

Condition: like new (used), Year of construction: 1984, functionality: fully functional, pressing force: 50 t, stroke length: 54 mm, total length: 1,750 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7,500 kg, year of last overhaul: 2022, DGUV certified until: 12/2027, ram adjustment: 80 mm, KAISER V50W high-speed stamping press, year 1984, extensively mechanically and electrically overhauled and modernized in 2022. The machine is in very good working condition and ready for operation. Technical data: Press force: 500 kN / 50 t Table size: approx. 800 × 550 mm Stroke: 54 mm Ram adjustment: 80 mm Speed: up to 400 strokes/min Main motor: SEW-EURODRIVE, 59 kW Year of manufacture: 1984 Retrofit / modernization: 2022 Equipment / modernization: Bwedpfx Amjz D Dq Njrou New electrical equipment Siemens SIMATIC PLC control Siemens SIMATIC HMI touch panel New 59 kW SEW-EURODRIVE main motor SEW drive/inverter PILZ safety system UNIDOR LVCpro press-force monitoring system Two UNIDOR piezoelectric force sensors on the connecting rods Separate monitoring of left/right and total press force on the HMI New electrical cabinet and modern safety components

Condition: used, Year of construction: 1997, Press force: 1000 t Stroke: 315 mm Bsdpfxozypx Tj Amrewu Strokes per minute: 21 - 42 /min Frame width: 1260 mm Side frame opening: 830 mm Shut height (max. stroke, top position, adjustment upwards): 1295 mm Table area: 1250 x 800 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Table height above floor: 670 mm

Condition: used, Year of construction: 1957, Press force: 100 tons Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Shut height (max. stroke, adjustment up): 460 mm Bsdpfszymurox Amrewu Table area: 910 x 680 mm Table opening: 400 mm Table height above floor: 800 mm Ram area: 630 x 400 mm

Condition: used, Year of construction: 1987, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,500 kg, Eccentric press EBU H16 Year of manufacture: 1987, 1500 kg, 1.1 kW Bodezv Sl Iepfx Amrewu Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us. Bwodpfx Aszv Skdomreu

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm no. of strokes 80 Hub/min ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection - hydraulic ram adjustment - cam-operated shift mechanism - enlarged table Bwsdezupkfspfx Amrou The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm Bwodpfx Amjzrprderju hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm Bwjdpfx Amjzrpqmsreu hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation Bwodpfxezrpp No Amrju

Condition: used, Year of construction: 1977, pressure 080 t Bwsdpfjzrpppex Amrju throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Bjdpfx Amozrpn Sorjwu Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested . Bwedpfx Amozq Sp Aoreu

Condition: excellent (used), Eccentric press Inventory no. 3919 Manufacturer: Weingarten Type: XOR 2 Bodpjzpbviofx Amrswu Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm * Overhang: 270 mm * Table area: 630 x 600 mm * Foot-operated * Machine weight: approx. 4500 kg In very good condition.

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V Bodpfezlgz Nsx Amrswu If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Bedpfxozbvvve Amrswu Machine weight: 3700 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, operating hours: 45,000 h, pressing force: 80 t, stroke length: 30 mm, table width: 780 mm, table length: 880 mm, ram plate width: 650 mm, ram plate length: 800 mm, Equipment: CE marking, documentation/manual, Balconi press 80 tons strokes 100-400 adjustable stroke 30 mm Bodjy Ulbvjpfx Amrewu die opening 350 mm machine weight 15,000 kg includes soundproof cabin

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Bwjdjy Hqz Sjpfx Amrju Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Bwsdjy D R N Ropfx Amreu Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic Bwjdpfx Ajywzh Remrou -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use Bsdpeyvzzzjfx Amrswu This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, Table size: 600 x 900 mm Maximum pressing force: 800 kN Stroke length: 0–110 mm Maximum tool size: 400 x 580 mm Bwjdpfeyr Nv Rsx Amrou Motor power: 7.5 kW Voltage: 380 V Weight: 5700 kg Dimensions L x W x H = 1600 x 1500 x 2750 mm Accessories, Equipment - Oil-bath gearbox - Pneumatic clutch-brake combination - PLC control for safety - Photoelectric sensors - Motorized adjustable slide - Mechanical overload protection - Two-foot and hand pedal control - Adjustable stroke (inverter) - Automatic central lubrication

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 77000 € 1455.3 € 70 to 4 mm 920 mm 500 mm 180 mm 12 - 120 mm 50 - 80 1/min 8 80 mm 260 mm 560 mm 7.5 kW 1225 mm 1865 mm 3060 mm 7000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Bwodeyq Snmjpfx Amrju Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view - overload protector

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Bwodpfeyn Sdpsx Amreu Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR