Do-ca

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 100308, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz,

Condition: excellent (used), CATALOGUE NUMBER 7393 TECHNICAL DATA Njdpfxo Af Izcj Adxswn Crosscut saw: max. saw blade diameter 350mm spindle 30mm blade adjustable left/right, up/down motor 1.5kW Router: dovetail spindle: spindle diameter 40mm spindle working height 145mm max. router bit diameter 400mm motor 3.7kW side carriage adjustable up/down clamping device on the carriage tabletop + fence with angle adjustment 600x400mm dimensions L/W/H 1700x2050x1260mm weight approximately 500kg ADVANTAGES – made in Germany – very good condition – used router Net price: 7900 PLN Net price: 1840 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions Nsdpfx Ado Af Hdhexown • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm • Spindle speed: 4,400 rpm • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: used, Free swinging chip screen manufactured by Bruks in Sweden. Suitable for producing cellulose chips. Technical data: Average capacity 250 m3 of ready screened chips per hour. Momentary peak capacity 300 m3 of ready screened chips per hour. Chips screening area, top deck 11 m2 Fines screening area, bottom deck 13 m2 Nwodps Afx Rajfx Adxsn Power 7.5 kW Net weight 4500 kg

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200067, type of input current: three-phase, overall weight: 445 kg, input voltage: 380 V, input frequency: 50 Hz, power: 1.1 kW (1.50 HP), We offer this used Omec SBM1200 Manual hydraulic clamp, year of construction 2020. Construction year: 2020 Nwjdpfx Ads Afn Easxon Power: 1.1 kW Voltage: 380 V Frequency: 50 Hz Weight: 445 kg Phases: 3 phases If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008805, X axis working area: 5920 mm Y axis working area: 1660 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 33 Nedpfx Ads Ad U Aisxewn

Condition: ready for operation (used), Transport dimensions: Length: 650 cm Width with trolley: 190 cm Width without trolley: 110 cm Height: 180 cm Height with trolley: 230 cm 6 cutting heads Saw motor: 5 kW Working height: 20 cm Ability to cut at an angle Nsdpj Ad I Dtsfx Adxswn Pneumatic clamping Two lasers Mortising cutters: 15 cm

Year of construction: 2016, condition: used, Shrink film packaging line Manufacturer: LCR Group Year of manufacture: 2016 Packaging line consisting of: Infeed table 3000 x 1800 x 880 mm Film station with film cutting 1000 x 3000 x 2150 Buffer conveyor table 5500 x 1500 x 880 mm Side sealing and trimming of excess film Nwsdpfe Ad If Rsx Adxjn 1200 x 3000 x 1300 Shrink tunnel 4600 x 2300 x 1900 Outfeed table 3000 x 1800 x 880 Note: Vacuum lifters at the infeed/outfeed are available as an option for an additional charge. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Nwsdpfx As Adz I Sedxsn Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Year of construction: 2025, condition: new, CAP PRESS: - Manufacturer: Zhenjiang Boye Machinery Equipment Co. - Year of manufacture: 2025 Njdpfx Ao Abylkjdxewn - Model: BYJDJSCX-4 - New machine - Price: €30,000 DRYER: - Manufacturer: Zhenjiang Boye Machinery Equipment Co. - Year of manufacture: 2024 - Model: YE2-160M-2 - New machine - Price: €10,000 GRINDER: - Manufacturer: Shanghai Wannuo Mechanical & Electrical Co - Year of manufacture: 2025 - Model/Type: YE3-225M-4 - New machine - Price: €30,000 GLUE MIXER: - Manufacturer: Zhenjiang Boye Machinery Equipment Co - Year of manufacture: 2024 - Model: YE3-160M-6 - New machine - Price: €5,000 CAP CUTTING MACHINE: - Manufacturer: Shanghai Wannuo Mechanical & Electrical Co - Year of manufacture: 2017 - Model: YE3-90S-4 - New machine - Price: €8,000

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. Nwedpfx As Aayi Hodxen DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: used, machine/vehicle number: 005447, Max. panel width: 3000 mm Nodpfo Aax Risx Adxewn Max. panel length: 1350 mm 180 degree panel tilt system: yes

Condition: used, machine/vehicle number: 008785, Max width workable: 800 mm Max length workable: 2300 mm Max height workable: 200 mm Working capacity: 7 cicli/min Nwjdpfez S T Twox Adxjn

Year of construction: 2002, condition: ready for operation (used), This 3-axis HOMAG CHF 51/32/32 was manufactured in 2002. It features a cutting width of 3200 x 3200 mm and a saw projection of 102 mm, ensuring efficient cutting capabilities. The machine includes three tables with an air curtain and a main motor of 11.2 kW. If you are looking to get high-quality woodworking capabilities, consider the HOMAG CHF 51/32/32 machine we have for sale. Contact us for further details. • Cutting width: 3200 x 3200 mm • Tables: 3 tables with air curtain • Saw projection: 102 mm • Cutting height: 85 mm • Main blade diameter: 400 mm Njdsz Sz Hfopfx Adxswn • Main motor: 11.2 kW (15 HP) • Scoring saw (Incisor blade): Included, with independent motor Additional equipment • Cut-Rite software optimization

Condition: used, machine/vehicle number: 008737, Overall length: 7200 mm Njdpjz Spaajfx Adxewn Overall width: 1000 mm Loading compartment length: 6600 mm Loading compartment width: 330 mm Cutting shaft power: 5.5 KW

Condition: used, machine/vehicle number: 008736, Overall length: 1850 mm Nodpfxjz Sn U Ns Adxjwn Overall width: 1450 mm Loading compartment length: 800 mm Loading compartment width: 800 mm Cutting shaft power: 11 KW

Condition: used, machine/vehicle number: 008735, Overall length: 1800 mm Overall width: 1500 mm Loading compartment length: 1000 mm Loading compartment width: 800 mm Nwsdpfx Adoz Rwhioxsn Cutting shaft power: 11 KW

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14 Njdez N Swiepfx Adxown

Condition: used, machine/vehicle number: 006639, X axis working area: 2600 mm Y axis working area: 900 mm Nwodpoz N Swcofx Adxjn Total number of drilling spindles: 22

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDGING,DRILLING LINE Nwjdpfjz Nx Hkjx Adxen Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDGING,DRILLING LINE Position 6: Robot IMA-CUTTING,EDGING,DRILLING LINE

Condition: used, machine/vehicle number: 008792, Position 1: Panel Feeding and Loading LCR-FLEXPACK Position 2: Roller Conveyors LCR-FLEXPACK Position 3: Roller Conveyors LCR-FLEXPACK Njdpfjz Nx E Hex Adxown Position 4: Cardboard Closing Stations LCR-FLEXPACK Position 5: Robot LCR-FLEXPACK

Year of construction: 2013, operating hours: 50 h, condition: excellent (used), functionality: fully functional, bar diameter (max.): 180 mm, cutting diameter: 180 mm, WOOD CHIPPER. ELECTRIC DRIVE (7.5 kW MOTOR) OR TRACTOR-POWERED. MAXIMUM WOOD DIAMETER FOR CHIPPING: 180 mm. Nwodpfx Aez Ngddsdxjn CHIP SIZE ADJUSTABLE FROM 20 mm TO 150 mm.

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Nwjdpez I Rfzofx Adxen Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Year of construction: 2017, condition: ready for operation (used), Other (Wood) machine manufactured in 2017. This SCM Superfici Mini features a working width of 1,300 mm and a maximum workpiece thickness of 90 mm. It operates at a feed speed of 1–3 m/min and includes a hybrid conveying system with a paper protecting device and lacquer reclaiming unit. If you are looking to get high-quality woodworking capabilities, consider the SCM Superfici Mini machine we have for sale. Contact us for further details. • Working width: 1,300 mm • Max. workpiece thickness: 90 mm • Working height: 900 mm Nwedoz Izpkepfx Adxen • Feed speed: 1–3 m/min • Conveying system: Hybrid with paper protecting device and lacquer reclaiming unit • Electronic control: Standard PLC

Year of construction: 2005, condition: ready for operation (used), overall weight: 5,500 kg, total width: 4,500 mm, total height: 2,000 mm, product length (max.): 9,500 mm, This 3-axis Windsor SMC Windor 20 was manufactured in 2005. It is an angle plant machining center designed for single-sided transversal and lengthwise processing of wooden window and door components. The machine features a maximum workpiece length of 2,800 mm and includes a full board Euro tool set in very good condition. If you are looking to get high-quality woodworking capabilities, consider the Windsor SMC Windor 20 machine we have for sale. Contact us for further details. Njdpfx Adoz Iryasxown • Machine description: Angle plant machining center for single-sided transversal and lengthwise processing of wooden window and door components • Status/condition: In working condition, under power; can be seen and tested • Line: 1088 • Workpiece length: 200–2,800 mm • Workpiece width: 40–200 mm • Workpiece thickness: 30–140 mm • End-cutting/tenoning unit motor: 4 kW • Tenoning saw blade diameter: 400 mm • Tenoning spindle length: 620 mm • Tenoning spindle diameter: 50 mm • Max. outer tool diameter (tenoning): 320 mm • Max. tenoning diameter: 370 mm • Profiling spindles: Minimum 2 spindles (shaft Ø 50 mm, length 320 mm) • Max. outer tool diameter (profiling): 240 mm • Profiling power capacity: Typically 10 HP (7.5 kW) • Auxiliary units: Dedicated shaft for fittings groove milling; integrated glazing bead recovery/trim saw group • Tenoning carriage speed: 4–25 m/min (electronically controlled automatic two-speed carriage) • Profiling feed speed: 3–15 m/min • Angle adjustment: Electronic tilting rule ±60° via automatic SCM “Rotaten” system • Control & handling: Multi-stroke spindles managed via CNC axes; CNC length stop; powered belt workpiece return system for one-man operation • Overall dimensions (L × W × H): 6,700–9,500 mm × 4,200–4,500 mm × 2,000 mm • Total weight: Approx. 4,500–5,500 kg • Electrical supply: 380 V Additional equipment • Full board Euro tool set (2009), very good condition