Kurt Leitungstiefbau GmbH

Condition: ready for operation (used), Kosz zasypowy o wymiarach 170x280x225 Lrsdpozn I Shjfx Aftop

Condition: ready for operation (used), Kosz zasypowy o wymiarach 170x280x225 Lrodpjzn I I Aefx Aftjp

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNB-32-40-PPV-A -Stroke travel: 40 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Lrsdpfoznt Dpox Aftsp -Dimensions: 255/45/H70 mm -Weight: 0.8 kg

Year of construction: 2001, condition: used, Gantry Crane MC LEVAGE Capacity: 1 T Year of construction: 2001 Height under hook: 3500 mm Distance between uprights: 4400 mm Lsdezmwm Eopfx Afterp Height under beam: 4000 mm Base width: 2300 mm Voltage: 380 V

Year of construction: 2026, condition: new, WISSMATEC scraper chain conveyor Lredpfx Aezmm Tzoftsp Overhead conveyor sturdy steel construction chain with scraper bars drive with geared motor magnetic separator

Condition: new, Year of construction: 2026, WISSMATEC sliding floor container Capacity ≈ 70 m³ Hydraulic sliding floor Hydraulic roof Ledozmm Rmopfx Aftsrp For example: for wood chips, as a storage container for boiler systems

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Lsdpfx Afjzmdl Ustorp Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Ljdpfx Aszmdlbofterp Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Lrsdpfezltwqox Aftep Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 2018, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, radial fan pressure blower from friction disc friction washing system -Type: WTG75-15-500 Lrjdezlqk Ispfx Aftjp -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Blower dimensions: 1000/820/H1100 mm -Dimensions of base: 805/1210/H1425 mm -Weight: 358 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Connecting coupling: Torsionally flexible shaft coupling -Shaft: Ø 28 mm Lrodpfxszlga Se Aftjp -Dimensions: Ø 100 x 100 mm -Weight: 3.0 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available Lodpszld Nkjfx Aftorp -Price: per piece -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor, gas pressure regulator, electrohydraulic drive, rotary actuator -Manufacturer: Deufra, electric actuator, rotary actuator -Type: AS 25 -Voltage: 400 V / 0.1 kW Ledpozkhqcefx Aftorp -Mounting: Bolt circle Ø 101 mm M10 / Ø 70 mm M8 -Dimensions: 460/310/H190 mm -Weight: 19.7 kg

Condition: good (used), Motor mount, electric motor console, motor bracket, electric motor mount, motor holder, motor support, base frame, machine support, substructure -Base frame: as a motor mount or similar use -Height 1780 mm -Receiver: Groove 68 x 20 mm, dimensions see photos -Dimensions: 1210/810/H1780 mm Ljdpfxszi R D No Afterp -Weight: 95 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan Ljdpfx Afoziz A Netorp -Manufacturer: WIPA, Radial fan pressure blower from friction disc friction washing system WTG75-15-500 -Type: Ø 600 mm -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Dimensions: 1000/800/H1100 mm -Weight: 343 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Pressure blower: Radial fan pressure blower -Type: Ø 420 mm -Motor: EMK 2.2 kW / 2915 rpm Ledpfx Afsziz Avetsrp -Volume flow rate: m³/min -Inlet connection: Ø 150 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 267.0, roll diameter: 80 mm, roll width: 800 mm, roll pitch: 500 mm, total width: 7,000 mm, total height: 5,700 mm, conveying length: 7,000 mm, input voltage: 380 V, load capacity: 3,000 kg, Fully functional, last major overhaul in 2024, since then only a few operating hours. Dismantling and transport must be organized by the buyer. We can provide contact information for qualified local companies. Rack system with 305 cassettes The individual cassette, which holds the bar material, has a clear width of 400/500 mm and a clear height of 410/600 mm. The total length is 6200 mm; it can hold 3000 kg. The rack system can be divided so that it can be stored on the left and right. With the master switch joystick, you can control the two lifting and lowering speeds and the continuously variable rail travel speeds, even in diagonal movement. Two gates at the ends of the walkway. Contact strips to secure the lowering movement on two sides below the roller conveyor and on three sides below the walkway. Horizontally acting travel contact strips, 7000 mm long, to secure the travel movement in front of and behind the rack transporter. All steel parts are sandblasted, primed, and spray-painted with a synthetic resin paint RAL 3002 chimney red. Base unit complete with 4 buffer blocks and 4 ramming blocks to be bolted to the floor. 36 m of flat rails arranged in pairs Lrodjziz Apopfx Aftjp ST 52 100 x 30 mm 36 m of cable track with suspension for 60 amps. Additional equipment Infeed and outfeed device In addition to the 3-part roller conveyor, the guide rail is screwed horizontally. At its end, there is a reversible brake gear motor that drives the carriage, which is mounted on six bearings in the guide rail, via sprockets and a high-performance chain. The roller-bearing-mounted running rollers on the carriage absorb all the forces that occur when pulling and pushing the long material. The infeed and outfeed arm is located in the working position in the middle of the roller conveyor width, approximately 200 mm above the top edge of the roller conveyor. It can be manually pivoted out of the roller conveyor area. Swiveling platform Swiveling platforms can be provided on both sides of the rack transporter. If there is an accessible rack aisle, the rack transporter must have a distance of 500 mm to the stored long material. This makes it difficult for the person standing on the operating platform to reach and pull the long material with their hands. The swiveling platform is swung into the free space in front of the rack compartment in two seconds, locked, and ready for use. In just as little time, the platform is retracted, locked, and the electrical contact releases the rack transporter for further travel. 2 complete platforms.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: CD072150, Hosokawa Solids Container Scale BSG – Batch Discharge Scale – Year of Construction 2021 For sale is a Hosokawa Solids container scale, type BSG, for the precise gravimetric batch dosing of powders and bulk materials. The system was manufactured in 2021 and is in very good used condition. It consists of the container scale with discharge, a stainless steel filter housing with cartridge filters, a weighing system, an Endress+Hauser level sensor, and Nord geared motors. An operating manual is available. The control system and switch cabinet are not included in the scope of supply. Ljdpfx Aozim D Sjftorp Technical Data Manufacturer: Hosokawa Solids Solutions GmbH Type: BSG Container Scale (Batch Discharge Scale) Year of Construction: 2021 Container Volume: 30 dm³ Container Tare Weight: approx. 75 kg Max. Product Temperature: 50 °C Max. Total Weight: approx. 150 kg gross The machine is suitable for the dosing of powders, granules, and other bulk materials in the plastics, chemical, food, and recycling industries. Inspection can be arranged at any time. Loading can be organized.

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid valve, poppet valve Ljdpjzh Hpxofx Aftjrp -Manufacturer: Ross, Control valve, Solenoid valve, Disc valve -Type: D2771B9011 -Voltage: 24 VDC -Pressure: 2-10 bar -Dimensions: 310/220/H140 mm -Weight: 6.9 kg

Condition: ready for operation (used), Design: drop through rotary valve, top connection: round flange, drive: SEW gear motor, with pneumatic air purge shaft sealing unit, filter regulator, pressure gauge, and hose connections, suitable for plastics, food products, pet food, animal feed, pharmaceuticals, infant formula, chemicals, biomass, aquaculture, dairy products, cosmetics, paints and coatings, minerals, recycling, batteries, and tires. Inspection on site is possible. The machine is not under power. Lrodpfx Afezhw Sqetsp

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: 221-0404, Please refer to the images for the description. Manufacturer: JAUDT Dosiertechnik Maschinenfabrik GmbH Type: 6305 (scraper wheel lock) Year of manufacture: 2021 Order number: 221-0404 Serial number: 0463888 Dimensions: 350 × 350 mm (according to drawing ZSR 350x350/670) Weight: approx. 350 kg Motor: SEW-Eurodrive DRN100L8, 1.1 kW, IE3 Complete documentation in German is available. Lrodpfxszhmilj Aftop If you have any questions, please do not hesitate to contact us.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Linde, double-acting hydraulic cylinders for forklifts -Item No.: 613596 -Stroke: 75 mm -Piston rod: Ø 22 mm -Hole: Ø20 mm / Hole spacing 287 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 345/68/H90 mm Lsdpezhlcqsfx Aftorp -Weight: 3.9 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 1275 mm -Piston rod: Ø 40 mm -Hole: Ø25 mm / Hole spacing 1525 mm Lrodpfxozg Ud Ue Aftjp -Quantity: 1 cylinder available -Dimensions: 1575/80/140 mm -Weight: 36 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 180 mm -Piston rod: Ø 60 mm Lsdpezg Udzjfx Aftsrp -Hole diameter: Ø25 mm / Hole spacing 400 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 455/127/164 mm -Weight: 20 kg/pc.

Condition: like new (used), functionality: fully functional, Screw diameter: 150 mm Length: 4,000 mm 1.1 kW geared motor Lrodpfxozgv Ihs Aftep Hopper: approx. 1,250 x 3,000 mm Overall height: approx. 1,770 mm unused