AS Anttrom

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm,

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22012A, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32-i MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 Gusdpfx Agex Hxy Ae Dok - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. cutter diameter (tool spindle): 45 mm - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min; in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Gjdpfx Asx Hxk Uog Djuk Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge Lathe Guodpox Hw Ursfx Ag Dsk Model TT-66 Year 2004 CNC GE Fanuc Series 18i-T Twin Spindle Twin Turret Chip Conveyor Iemca Bar Feeder Driven Tools

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. Godjx Hwgujpfx Ag Deuk FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe Gujdpex Hwfqefx Ag Djk - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 360 mm, turning diameter: 360 mm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, EMCO TURN 360 Gsdpfx Agjx Hwa Uj Deuk TURRET 12 CONTROL : SIEMENS SINUMERIK

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe Gujdox Hwanopfx Ag Dok - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 183261, turning length: 470 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 2,200 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 CNC lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 31 A - Connection: 24 kVA The machine is equipped with a 12-position tool turret, a chip conveyor, a tailstock, and a main spindle. Gedpfjx Hv Hgjx Ag Douk Attention: Supplied without the tool holders pictured! Note: The item must be collected between 04 and 12 March 2026 on a binding, to-be-agreed date. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 170618, turning length: 470 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,400 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 CNC lathe Guodpfxsx Hv Epo Ag Dok - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 36 A The machine is equipped with a 12-station tool turret, chip conveyor, coolant tank, tailstock, main spindle, and a high-pressure pump. Note: The item must be collected definitively between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 219013, turning length: 409 mm, turning diameter: 280 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 187 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 33 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, torque: 162 Nm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL MATRIX NEXUS, number of slots in tool magazine: 12, MAZAK QUICKTURN NEXUS 100 - II MSY CNC Lathe Note: Technical specifications are provided without guarantee! - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 31 A - Connection load: 23.2 kVA - Equipped with sub-spindle, tool turret and main spindle, with driven tools Guodox Hv A Ispfx Ag Djk - Main spindle chuck size: 6" - Sub-spindle chuck size: 5" - Tool shank height: 20 mm - Boring bar shank diameter: 32 mm - Max. speed for driven tools: 5000 rpm - Max. torque: 47 Nm The machine is equipped with a bar feeder from manufacturer LNS, a coolant tank, and a high-pressure pump. Attention: The item must be collected on a binding appointment between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Gedpfx Agex Hp Hgj Deuk Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Many tool-holders and live-tools included Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Turret type: 12 stations Godpox Hp E Nefx Ag Dsuk Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: good (used), Year of construction: 2007, functionality: fully functional, Fanuc control, two turrets, Y-axis, sub-spindle, short bar loader, Godpex Hpiuefx Ag Deuk

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Gjdpjx Hhm Esfx Ag Dsuk Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details turning diameter 170 mm turning length 330 mm control Fanuc System Oi-TD total power requirement 27 kVA weight of the machine ca. 6,0 t Additional information Precision CNC turning center with main and sub-spindle, driven tools and Y-axis Fanuc Oi-TD CNC control 6 controlled axes 4 simultaneously controlled axes Gjdpex Hgnuofx Ag Dsuk Maximum workpiece (diameter x length): 170 x 330 mm Bar capacity: 65 mm Travels: X-axis: 211 mm Z-axis: 400 mm Y-axis: ± 50 mm A (counter spindle): 506 mm C-axis: 0.001 deg Rapid traverses: X-axis: 24 m/min Z-axis: 27 m/min Y-axis: 12 m/min A-axis: 27 m/min Main Spindle: Spindle diameter at front bearing: 100 mm Spindle head: A 2-6 Spindle motor: AC 7.5/11 kW (30 min./100% duty cycle) Speed range: 4500 rpm Sub-spindle: Spindle diameter at front bearing: 100 mm C-axis: 0.001 deg Speed range: 4500 rpm Drive power: 5.5/7.5 kW (30 min./100% duty cycle) Spindle flushing with integrated pneumatic ejector Turret: 12 stations Tool taper 25 x 25 mm Internal machining 40 mm diameter Max. speed: 5000 rpm Drive power 1.5/3.7 kW (30 min./100% duty cycle) Drilling/milling up to 13 mm diameter Tapping up to M8 Total connected load 27 kVA Dimensions: Machine length without chip conveyor 2690 mm Machine width without chip conveyor 1865 mm Machine height 1900 mm Net weight 6000 kg Equipment and accessories: Bar feeder Chip conveyor Various accessories such as collets and tool holders

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Gusdsx Hgl Hepfx Ag Djk Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: used, Year of construction: 2021, turning length: 1,519 mm, turning diameter: 670 mm, total height: 2,715 mm, total length: 6,110 mm, total width: 2,700 mm, CNC Turning Milling Centre with 2nd Spindle Control Mazatrol Smooth Ai Turning diameter 670 mm Turning length 1519 mm Spindle bore diameter 102 mm Spindle nose A 2-11 Spindle nose sub spindle A 2-8 Turning speed 35-3.300 R/min Turning speed sub spindle 4.000 R/min Milling head speed 12.000 R/min Gsdpfxjx E Uide Ag Djuk Movement X-axis 695 (+570/-125) mm Movement Y-axis 300 mm Movement Z-axis 1585 mm B-Axis travel -30/+210° C-Axis indexing 0,0001° Tool Taper Capto C6 Tools in tool magazine 112 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Guedpfx Aox E Ugvog Dok Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Guodpfx Agox E Ubmj Djk Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Guedpfxex E T Npo Ag Djk Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Guedpfx Agox E Tzrj Dek

Condition: excellent (used), Year of construction: 1994, CNC Lathe Automatic Index GS42 Control: Index C200-8 (Sinumerik 880) Spindle bore: 42 mm, two machining turrets Turret 1 – X=120 mm, Z=220 mm, 12 tool stations (6 driven), part handover Turret 2 – X=120 mm, Z=80 mm, 8 tool stations (4 driven) Dynamic C axis Bar feeder with magazine INDEX MBL 3500 mm, including complete set of reduction sleeves Gujdpfx Asx E Sqlsg Dsk Set of clamping collets – 10 pcs Driven tool holders – 5 pcs Standard VDI20 tool holders – 5 pcs The machine is 100% operational and in excellent condition (maintains tolerances up to 0.001 mm)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Gujdpfex E Eamsx Ag Dsk Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY (Year 2022) featuring Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Equipped with integrated spindle motors, water-cooled counter-spindle (preloaded roller guides), and Y-axis for both main and sub-spindle operations. Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0-5,000 rpm Counter-spindle: - Power output: 22 kW - Max. torque: 130 Nm - Speed range: 0-7,000 rpm Tool turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Gedpfx Asx E Dncog Deuk Y-axis: - Travel: +/- 40 mm Additional features: - Hollow clamping cylinder incl. drawtube - C-axis for main/counter spindle - Sinumerik ONE / OPERATE control - 22" multi-touch display - SHOPTURN - 3D simulation - Residual material detection - USB interface - Electrical cabinet air conditioning - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Parts ejector and flushing via the counter spindle - Hydraulic unit - Interface for chip conveyor - Full documentation and CE certificate Control languages: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the sub-spindle with a live center for supporting workpieces, enabling shaft machining even on machines without a tailstock. Maximum contact force limited to 50% of axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for adding robots (HARTING connector; signal exchange via Profinet; safety signals 2-channel/potential-free). Digitization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connecting to MDE/BDE systems Included standard information: • Machine ON/AUX ON • Automatic mode • Production mode – program active • Program running and override between 95–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 - 3D data model of the machine - Pneumatically operated finished part catcher for gentle unloading; finished parts can be transported to a collection box (standard) or conveyor belt (option) - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 - For connecting the EMCO SL1200 short bar feeder. ...and more. The machine is immediately available!