Technical Service

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 Fpsdpfx Akszz Tm Ro Ujl S/N: D18451643 MFG: 2018 Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price Euro 3.590 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h Fpsdpfxezzr Nks Ak Ujl - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, For sale is a two-stage Leybold vacuum pump unit, consisting of a RUVAC WA 501 roots/rotary piston pump and an SOGEVAC SV 300 B rotary vane pre-pump. The components are mounted together on a base frame with a collection tray. Technical data and specifications: - RUVAC WA 501, catalog number 11730 - Nominal pumping speed RUVAC: 505 m³/h - Maximum pumping speed at 50 Hz: 410 m³/h - RUVAC motor: 2.2 kW, IP55 - SOGEVAC SV 300 B, catalog number 960717 Fpedpfx Aszzr Ndok Uol - Year of manufacture SOGEVAC: 2019 - Effective pumping speed SOGEVAC at 50 Hz: 240 m³/h - Nominal pumping speed SOGEVAC: 280 m³/h - Motor power SOGEVAC: 5.5 kW - SOGEVAC nameplate weight: 207 kg - Last visible service record: 08/2024 Visible scope of delivery as per the images: - RUVAC WA 501 with motor - SOGEVAC SV 300 B with motor - Direct adapter and connection assembly - Cooling/fan unit - Sensor and connection cables - Base frame with collection tray Used condition with typical signs of use and storage, as well as some minor rust on the frame. The functional condition and achievable vacuum performance have not been re-checked after disassembly; therefore, it is sold as untested. A control cabinet, external cables, or documentation are not shown in the images and are not part of the described scope of delivery. Scope of delivery as per the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an extra charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: like new (used), Manufacturer: ILMVAC GmbH Year of manufacture: 2007 Machine number: A218855 Type/Model: U4.40 Fpodpozzdzfsfx Ak Uel Vacuum: 0.5 / 1.0 mbar Motor speed: 2,920 / 3,460 rpm Connection: 230 V Suction volume: 41 / 48 m³/h Motor oil: Quantity: Condition: Presumably unused Weight: kg Dimensions: mm

Condition: new, machine/vehicle number: vt 4.40, volume flow: 48 m³/h, final pressure: 150 bar, power: 1.5 kW (2.04 HP), BRAND NEW IN BOX! Becker VT 4.40 Vacuum Pump (Oil-Free / Dry-Running) For sale is a 100% brand new and unused Becker VT 4.40 vacuum pump. It is still in its original factory packaging and has never been connected or operated (only opened for photos). The Becker VT 4.40 (Made in Germany) is an industry-standard, dry-running rotary vane pump designed for continuous, heavy-duty use, maximum reliability, and low maintenance. Ideal Applications: CNC routers and vacuum clamping tables Packaging and sealing equipment Printing and graphic arts machinery Industrial automation and robotics Technical Specifications: Brand: Becker Model: VT 4.40 Capacity / Displacement: 40 m³/h (approx. 23.5 CFM) Type: Dry-running / oil-free rotary vane vacuum pump Fodpfx Ajzy Sbqjk Uopl Voltage: [Insert 230V 1-phase or 400V 3-phase from the nameplate] Condition: 100% Brand new in factory box Price & Shipping: Asking Price: [Insert Price, e.g., €1,250 / $1,350 or "Best Offer"] Pickup / Delivery: Local pickup in [City], or insured worldwide shipping available at buyer's expense. Serious buyers only.

Condition: refurbished (used), warranty duration: 12 months, Pfeiffer DUO125 - Used - Fully refurbished - Very good condition - 1-year warranty The following work was performed on the pump: - Complete dismantling and cleaning - Replacement of the slide valve - Replacement of all faulty parts, seals and wear parts - Replacement of the valve plates and valve tongues - Professional reassembly and test run In addition, as a company with 25 years of industry expertise, we can offer you: - Advice on choosing the right pump type for your production - Installation of the pump at your facility Fpjdpfx Akezy Nbze Ujl - Provision of a suitable replacement pump for the duration of the exchange or repair - Overhaul/repair of severely damaged pumps - Worldwide delivery Thank you very much for your interest in our listing. If you have any further questions, please feel free to contact us by email or phone. You can find our contact information on our website. Best regards, Asshorn Vakuumtechnik

Condition: refurbished (used), machine/vehicle number: 11552, warranty duration: 12 months, Leybold Rootspump WAU2000 - Used - Fully refurbished - Very good condition - 1-year warranty The following work was performed on the pump: - Complete dismantling and cleaning - Replacement of piston rings and roller bearings - Replacement of all defective parts, seals and wear parts - Professional reassembly and test run In addition, as a company with 25 years of industry expertise, we can offer you: - Advice on choosing the right pump type for your production - Installation of the pump at your facility Fpjdpozy I R Iefx Ak Ujl - Provision of a suitable replacement pump for the duration of the exchange or repair - Overhaul/repair of severely damaged pumps - Worldwide delivery Thank you very much for your interest in our listing. If you have any further questions, please feel free to contact us by email or phone. You can find our contact information on our website. Best regards, Asshorn Vakuumtechnik

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: C0737000714, overall weight: 250 kg, total length: 1,011 mm, total width: 581 mm, total height: 410 mm, volume flow: 250 m³/h, final pressure: 0 bar, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 1,500 rpm, The pump is used but it works well. We can change the oil if you want. The price does not contains the shipping cost. The pump works in a pump stand, with an Aerzener booster (500m3/hour). We can sell it together if you want that. More info, please contact us, and send an inquiry. Fpedezw D Sispfx Ak Usl

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 241 kg, total length: 1,144 mm, total width: 644 mm, total height: 528 mm, volume flow: 244 m³/h, final pressure: 200 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, warranty duration: 12 months, BECKER VTLF 2.250 – Dry-running vane vacuum pump, oil-free BECKER VTLF 2.250 industrial vacuum pump, designed for continuous operation and completely oil-free. The composite graphite self-lubricating vane technology allows for operation without oil in the compression chamber, reducing maintenance and operating costs. Fpedpjzwwaysfx Ak Uol Capacity: 244 m³/h, ultimate vacuum: 200 mbar absolute, motor: 5.5 kW, power supply: 400 V three-phase – 50 Hz, air-cooled, noise level: 77 dB(A). Equipped with an integrated air filter and a regulating valve. Suitable for CNC machines and vacuum tables, woodworking, packaging, printing and paper, plastics, pick & place handling, vacuum clamping, and industrial automation. Condition: new.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, volume flow: 44 m³/h, input voltage: 400 V, input frequency: 50 Hz, type of cooling: air, Vacuum pump PVR Type RP 40 AV/BP Capacity 44 m³/h Absolute pressure 0.01 mbar 400V / 50Hz Year of manufacture 2000 Price €2500 Fedpfszwvb Njx Ak Uspl

Condition: used, Year of construction: 1999, functionality: unexamined, volume flow: 200 m³/h, input voltage: 400 V, input frequency: 50 Hz, type of cooling: air, PVR Vacuum Pump Type PVL 200 Capacity 200 m³/h Absolute pressure 0.5 mbar Year of manufacture 1999 Fpjdpfezwva Sex Ak Ujl Price €3,000

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, volume flow: 600 m³/h, type of cooling: air, PVR vacuum pump Type RP 41 AV/BP Fodpfjzwu Twex Ak Uepl Capacity 600 m³/h Absolute pressure 0.01 mbar Year of manufacture 2000

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, volume flow: 300 m³/h, input voltage: 400 V, input frequency: 50 Hz, Vacuum pump PVR EU 300B PVR vacuum pump Type EU 300B Capacity 300 m³/h Absolute pressure 10 mbar Year of manufacture 2004 Price € 3500 Fpjdpfxszwu R As Ak Ujl

Condition: used, functionality: fully functional, volume flow: 250 m³/h, Used, fully functional pump unit/pump combination from Edwards, consisting of a rotary vane pump E1M40 (40 m³ pumping capacity) and a roots pump EH250 (250 m³ pumping capacity), as well as the corresponding solenoid shut-off valve. Both pumps were in combined operation until they were removed and were installed in an industrial plasma nitriding system, achieving a final pressure of approximately 20 Pa. The pumps are sold as a package. However, individual sales are also possible by arrangement. Fjdpfszwdvzex Ak Uepl The pumps can be inspected and collected on site. Shipping via a freight forwarder is possible by arrangement and at the buyer's expense. Sale is subject to exclusion of liability for defects and warranty.

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M Fodpszwchvefx Ak Ujpl (see technical details on photos) + 1 cable Used, functional, untested equipment

Condition: used, functionality: unexamined, input voltage: 345 V, input frequency: 87 Hz, input current: 4 A, rotational speed (max.): 5,000 rpm, Elmo Rietschle G-BH1 BH1430 Vacuum Blower, new Fsdpfx Aozv Sn Nok Uopl Manufacturer: Elmo Rietschle / Gardner Denver Model: G-BH1 BH1430-7A221 Adjustable speed, Voltage: 380 Volt, 50 Hz.

Condition: new, functionality: fully functional, NEW & UNUSED VACUUBRAND PC 3004 VARIO SELECT CHEMISTRY PUMP STATION For sale is an absolutely new, unused VACUUBRAND VARIO® chemistry pump station, type PC 3004 VARIO select (purchased from HUBERLAB Switzerland, new price / list price: CHF 10,590). The unit comes from a project design / incorrect allocation and has never been put into operation or brought into contact with any media. HIGHLIGHTS & BENEFITS: - Integrated graphic touch controller VACUU·SELECT with pre-defined and freely programmable vacuum processes - Highly efficient, speed-controlled VARIO diaphragm pump for precise vacuum control and extremely quiet operation - Highest chemical and solvent resistance due to fluorinated plastics in the media area - Integrated suction-side separator (AK) and pressure-side emission condenser (EK) for optimal solvent recovery TECHNICAL DATA: • Type: PC 3004 VARIO select • Power connection: 200–230 V~, 50–60 Hz (with CH power cable) • Vacuum controller: VACUU·SELECT (touchscreen) • Cylinders / Stages: 4 cylinders / 3 stages • Max. pumping capacity: 4.6 m³/h (2.7 cfm) • Ultimate vacuum (abs.): 1.5 mbar (1.1 Torr) • Ultimate vacuum with gas ballast (abs.): 3.0 mbar (2.2 Torr) • Max. back pressure (abs.): 1.1 bar • Motor rated power: 0.53 kW Fjdpfxjzv H Uks Ak Ujpl • Speed range: 30 – 2400 min⁻¹ • Protection class: IP 40 • Suction side connection: hose nozzle DN 6–10 mm • Pressure side connection: hose nozzle DN 8–10 mm • Dimensions (L x W x H): 419 x 243 x 457 mm • Weight: 21.1 kg CONDITION: 100% factory new, unused, with complete accessories. PAYMENT & LOGISTICS: • Invoicing: Sale is made against invoice (excluding VAT / tax-free intra-community delivery for companies in the EU with a valid VAT ID). • Currency & Payment: Billing in EUR. Bank transfer (SEPA) before collection or shipment. • Shipping / Transport: - Self-collection at the location (zip code 4226 Breitenbach / Basel region, Switzerland) is preferred. - Secure shipping via courier or freight forwarder (well-padded and packed on a pallet) within Switzerland and to the EU after consultation and upon assumption of costs.

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Protection class: IP55 Operating mode: S1 Fpedszvzwtepfx Ak Ujl Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm CE marking Standard: EN 60034 According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Fpodpfx Akozvrnis Usl Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar Fsdpfx Akozvrm Es Uepl The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Fpsdpfxezvrmrs Ak Uol Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm Fjdpfx Aszvrmfok Uopl The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. Fodjzvrluopfx Ak Uepl The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. New oil. New oil filter. New exhaust separators. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Fedpfjzvrh Ajx Ak Ujpl final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Fsdpfxjzvrhpo Ak Ujpl Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).