Konstantin Isaak

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Itedpfozmtl Rex Aa Eoi Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Ijdpszmtlkjfx Aa Esti Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: good (used), Year of construction: 2006, I sell the 3-axis CNC working centre Biesse Rover A 3.30 with beam table, year 2006. Configuration: 3-axis main spindle HSD Tool magazine 14 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3130x1250mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Uniclamp System included Total power 17kW Biesse Works software controller with full instructions. Pump Becker 110 m3/h. 2,4KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Ijdezmnzmepfx Aa Ejti Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: used, Double gantry-type machining center with two independent operating heads working on independent tables. • Year of manufacture: 2012 • Number and type of spindles / Machining heads: Two independent, liquid-cooled 5-axis heads (typically 2+2 compact electrospindles per head) operating up to 24,000 RPM. • Installed power / Electricity: 50 kW / 380 V / 50 Hz • Air consumption: Standard operating requirements for Bacci multi-axis pneumatic clamping and extraction circuits (typically a nominal pressure of 6 to 7 bar). • Machine weight: Approx. 6,000 kg • CNC / Control system: Industrial OSAI CNC system with high-speed servo drives. Ijdpfx Ajzmhz Hja Eoti • Software included: Complete, featuring PITAGORA 3D optimization and simulation software for dynamic workload balancing. • Material handling integration: Fully integrated automatic hopper feeder system for synchronized loading and unloading of workpieces. • Data and system backups (critical advantage): For a seamless commissioning and startup, we include: o Complete copies of all parameter files for servopacks and inverters/frequency drives. o Full copies of the OSAI system BIOS and hard drive clones. o Backups on dedicated PCs containing Pitagora configurations. o Complete original documentation, both in physical and digital formats.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. Itsdpfxszmgkmo Aa Eei • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working area X: 3640 mm Working area Y: 1342 mm Part clearance: 180 mm 12 kW C-axis electrospindle, ISO30 mounting Drill bits for vertical drilling: 24 Drill bits for horizontal drilling X: 6 Drill bits for horizontal drilling Y: 4 Saw blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rails with EPS automatic positioning of the rails, vacuum cups Chip conveyor belt 1 vacuum pump with a capacity of 90 m3/h Safety mats Approximate weight: 4000 kg. Includes 3 aggregates (for door milling, mortising, etc.), vacuum cups, and some Uniclamps. Itsdezmff Njpfx Aa Eoi Only 1406 operating hours on the 4-axis electrospindle, and 831 hours on the drilling unit. Available from January 2027.

Condition: good (used), Year of construction: 1992, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, CNC milling machine Rover 342 with 1 milling motor, saw blade, and cross-drilling attachments Ijdpfx Aozl Uaysa Ejti is fully functional but has been disassembled by the seller from a closed-down factory.

Condition: excellent (used), Technical specifications: • Working area: 3660 × 1550 × 150 mm • Part passage: 150 mm • Electrospindle 13 kW, HSK 63F Iodpfx Aajzl Taxo Ejti • Speed range: 1,500–24,000 rpm • Drilling head: 7 vertical spindles • Tool magazine: 10 positions • Multi-functional aluminum table with 8 vacuum zones • 2 vacuum pumps 250 m³/h (total 500 m³/h) • SCM Xilog Maestro control system • Centralized automatic lubrication • Electrical cabinet air conditioning

Condition: excellent (used), Year of construction: 2011, Used 5-axis CNC machining center Manufacturer: Morbidelli Type: Universal X5 HD 36 Year of manufacture: 2011 Itsdpfx Aaozl Ar De Esi Approx. 4800 operating hours Technical specifications: Console table 3548 x 1350 mm with manually adjustable consoles – 6 pieces, each console with 2 vacuum cups and one pneumatic ejector rail, Linear scale Laser pointer for setup, vacuum pump CNC control system: MAESTRO Main spindle 11 kW HSK 63F with C-axis, 1500 – 24,000 rpm Rapid tool changer (turret) on the y-axis support, 12-position Tool changer (20 positions) on the right and left side as a pick-up; 10 positions each Drilling head with: 12 vertical spindles, 4+2 horizontal spindles, nut saw Bumper safety system The tools, HSK tool holders, drills, etc. shown in the pictures are not included in the scope of supply!

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel Itodpfezlz Svsx Aa Eoi • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 22,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Isdpozln D Esfx Aa Ejti Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: used, Year of construction: 2014, Second-hand machine Year of manufacture: 2014 Features and technical specifications: - X-axis working range: 3,740 mm Isdjzlbp Uepfx Aa Eoti - Y-axis working range: 1,570 mm - Z-axis working range: 350 mm - 4th axis: fitted - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change positions: 24 with disc changer

Condition: used, Year of construction: 2016, Second-hand machine Year of manufacture: 2016 Features and technical specifications: - Electrical supply: 3x400V 50 / 60Hz - 5-axis gimbal-mounted electric spindle, 12 kW (S6), HSK F63 - 24,000 rpm - Ceramic bearings, including liquid cooling with infinitely variable- height-adjustable extraction hood – electrically controlled - Full rated power at approx. 12,000 rpm - Speed: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled by an inverter - Direction of rotation: clockwise/anti-clockwise - 2 controlled compressed air connections - Interface for modules - Tool weight (rotating): 6 kg - max. saw blade Ø 350 - Spindle cooling: Liquid cooling - Extraction hood, infinitely adjustable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine bed of the Profit H350 16.30 is made of thick-walled, electrically welded shaped tubes. The steel bracing inside the column ensures a high stability is achieved. - Machining area H350 16.30: Travel range of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm working area: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: Depends on the selected Safety system (these can be found in the layout). Itodpozlbpbefx Aa Eoi - Double-sided drive gantry - X-axis guide system: The X-axis travel gantry is driven via a rack with an oblique, crowned tooth profile – this guarantees maximum precision. The reduction gearbox ensures the highest machining quality and repeatability. The bearings are supported by sealed ball screws running on hardened and ground linear guides. - Y-axis guide system: Support is provided by sealed ball screws running on hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guide system: Support is provided by sealed ball screws running on hardened and ground linear guides. The Z-axis is positioned by means of a ground ball screw. - Automatic central lubrication: The grease is fed in a controlled manner to the guide carriages of the X, Y and Z axes, as well as to the ball screws on the Y and Z axes conveyed. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left-hand side of the machine column, including a pick-up position for modules: The 12-position linear changer ensures the shortest possible changeover times and offers sufficient space for milling tools. one unit changeover station (see layout for configuration options) Max. tool diameter 250 mm Max. tool length 240 mm - DH 18 6H 1S drilling head: Vertically, 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. 6 horizontal spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Pre-stroke = 70 mm a maximum drill length of 70 mm and shank diameter D = 10 mm. All spindles are individually driven and can be activated on demand. 1 slotting saw ? in the X direction a maximum saw blade diameter of 120 mm a maximum sheet thickness of 5 mm maximum speed continuously variable up to 7,500 rpm. The drilling unit covers the entire working area, both both horizontally and vertically. - Controlled central extraction connection: The programme control is used to activate extraction either for the drilling head or the milling spindle. This controlled slide valve ensures optimised extraction performance. For connection diameters, see layout - ...

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions Itjdpozk N Hljfx Aa Eei - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Ijdpozk Nz Aefx Aa Eeti Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm Isdezk Nvgepfx Aa Eoti - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Itodpfjzk Nu Nex Aa Eji Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Including vacuum suction cups Iedpfszk Nmfox Aa Eoti Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5-Axis Machining Center – SCM ACCORD WD Dimensions of workpieces: Length: 250 – 3680 mm Height: 15 – 250 mm Width: 30 – 1950 mm Automatic loading and unloading system equipped with magazines for 32 workpieces: 16 loading positions 16 unloading positions Workpiece width: 120 mm Electronic system for reading workpiece dimensions: Height Width Length Maximum weight of workpiece handled by the automatic table: 480 kg Positioning and clamping system: 6 automatic beams with a total of 18 clamps Device for cleaning workpieces with compressed air, located under the clamping cover directly in the clamping area Adjustable clamping pressure depending on the material being processed Sensor for monitoring pressure loss / loosening of clamping Minimum distance between clamps and beam: 140 mm Automatic table: Maximum travel speed: 80 m/min 5-axis electrospindle: Liquid cooling Power: 13 kW at 7000 rpm Tool clamping system: HSK63E Machining unit with 0–360° rotation, consisting of: Vertical milling unit – 4.5 kW Horizontal drilling unit – 4.5 kW Isdpfx Aaozk Dfvs Eoti Horizontal milling unit – 4.5 kW Unit for cutting strips/thin parts – 4.5 kW Tool magazine – 48 positions: Tool holder spacing: 104 mm Maximum tool diameter: 350 mm Maximum permissible weight per chain: 250 kg Maximum weight per position: 15 kg Tool support holders: METAL Additional tool magazine 12 positions – RAPID12: Tool holder spacing: 88 mm Maximum tool diameter: 230 mm Maximum weight per position: 8 kg Additional tool magazine 12 positions – TR12: Tool holder spacing: 130 mm Maximum tool diameter: 300 mm Total number of tool positions: 72 Option to purchase additional tools

Condition: good (used), The machine is still in operation and is currently running. It can be inspected at the customer's site. Itedpfxjzkt Uys Aa Eoi

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 78587, functionality: fully functional, operating hours: 25,920 h, Biesse CNC-controlled machining center, type Rover C 6.50 CONF3 Working area: X-axis 4600 mm, Y-axis 1535 mm Z-axis 275 mm 5-axis controlled Spindle speed: 1000-20000 rpm Tool changer system with 22 positions Tool holder: HSK F63 Iodozkrlqjpfx Aa Ejti Equipped with pneumatic material clamping devices Vacuum pumps Weight: approximately 7 tons Includes software and dongle.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 14 kW (19.03 HP), input current: 63 A, number of axes: 5, number of slots in tool magazine: 16, overall weight: 6,400 kg, Masterwood Projekt 4005L 5-axis gantry milling machine Vacuum pump, 100 m3 capacity Tool changer with 16 positions Drilling unit with 17 positions Iodpezkazyofx Aa Eeti Clamping preparation Windows control system Masterwork CAD-CAM system Available September 2026 Machine owned by the first owner and maintained by the dealer Dismantling and loading included.

Condition: used, Year of construction: 2003, machine/vehicle number: 95240126, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, working width: 1,300 mm, working length: 4,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iodpfxezi A E Eo Aa Eoti Number of axes: 4 Travel range X-axis: 4,870 mm Travel range Y-axis: 1,840 mm Travel range Z-axis: 250 mm Travel range C-axis: 360° Maximum axis speed X: 85 m/min Maximum axis speed Y: 85 m/min Maximum axis speed Z: 25 m/min Working area: 4,200 x 1,300 mm Spindle power: 9 kW (12 hp) Maximum spindle rotation speed: 18,000 rpm Spindle interface: HSK63F Number of tool changer positions on the head: 8 Number of tool changer positions on the Y-axis: 15 MACHINE DETAILS Power of the independent swivel spindle: 3 kW (4 hp) Power of the independent horizontal motor: 5.6 kW (7.6 hp) Maximum speed of the horizontal motor: 18,000 rpm Drilling unit motor power: 3 kW (4 hp) Suction capacity of the vacuum pump: 100 m³/h Dimensions & Weight Dimensions of the installed machine (L x W x H): 7,500 x 3,800 x 2,350 mm Overall dimensions for transport (L x W x H): 13,500 x 2,400 x 2,400 mm Total weight: 5,000 kg EQUIPMENT 6 suction bars, each with 3 suction cups 4 panel lifting bars 6+2 reference stops 6 lockable clamping devices Dot laser HSK63F tool holder (2 pieces) TPA Albatros CNC control system (updated in 2018) with remote control Automatic central lubrication Front safety mats + perimeter guardrails User manuals + electrical diagram + CE certificate

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Itjdpfxezhcg Hj Aa Eei Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Working area X: 3200 mm Working area Y: 1550 mm Electrospindle Iodszguiwepfx Aa Esti Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction Circular tool changer with 16 positions Work table with 6 stops Software: bSolid - bSuite3 Control panel Safety mats Protective nets Approximate weight: 2400 kg Installed in 2018 Only 171 program hours executed, 108 hours of 4-axis electrospindle operation, 26 hours of drilling.