Namestnik D.o.o.

Condition: used, mileage: 28,000 km, power: 103 kW (140.04 HP), number of beds: 2, fuel type: diesel, gearing type: mechanical, color: white, first registration: 07/2022, total length: 6,650 mm, total width: 2,140 mm, total height: 2,870 mm, axle configuration: 2 axles, emission class: euro6, overall weight: 3,500 kg, Year of construction: 2022, Equipment: air conditioning, bathroom, second-hand vehicle warranty, * Engine / Chassis: Citroen Jumper 2.2 l BlueHDI Dedpoz N Nyujfx Al Aewc * Power: 103 kW / 140 hp * Transmission: Manual transmission * Mileage: 28,000 km * Permissible total weight: 3,500 kg * Bed(s): Single beds * Seating arrangement: Side seating arrangement * Upholstery: Adventure Edition * Wood trim: Sensual Oak ----SPECIAL EQUIPMENT: * Adventure Edition (Citroën Jumper 2.2 l Blue HDI - 103 kW (140 hp) - EURO 6 and Booster, white cab with painted bumpers, leather steering wheel and gear knob, 16" alloy wheels, Adventure Edition interior, alternative flaps (roof storage cabinet), 2nd external storage compartment flap, insulated wastewater tank, conversion of single bed to double bed (V 66), wiring for rearview camera, Basic package, awning, bicycle carrier for 3 bikes, 22" flat screen + mount, Teleco Flatsat Classic 65, Adventure Edition decals) * Second service battery 95 Ah * Wiring for solar system * Wooden slatted base in the shower * Radio + rearview camera ---- ----Subject to changes, prior sale and errors! ----created with SYSCARA

Condition: used, mileage: 149,050 km, power: 130 kW (176.75 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,350 mm, loading space width: 1,780 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8210BX ----Why Autonext? Over 400 cars and commercial vehicles available immediately. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Full range of vehicles available on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear picture now: Watch the vehicle in full, inside and out, in 4K quality via the YouTube link: 1st owner, German vehicle, non-smoking vehicle Complete service history New oil service All-wheel drive "4MOTION" Trailer coupling, increased towing capacity 3,000 kg Inverter in the cargo area 230V socket in (cargo area and passenger compartment) Rear view camera Parking assist front and rear with active side protection Parking assistant Audio navigation system Discover Media Navigation system Climatic air conditioning (cab) Blind Spot Sensor / Lane Change Assistant Lane Change Assist Rear step ---- Special equipment: * Storage package 2 * Storage compartments: 2 DIN slot at the front under the headliner * Interior lights in the cab: reading light at the front * Trailer coupling: fixed ball head * Trailer stabilization program * Audio navigation system Discover Media (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Glove compartment lockable * Driver assistance system: parking assist front and rear with active side protection and lane change assist (Side Assist) * Exterior mirrors electrically adjustable, heated and foldable * Driver assistance system: Lane Change Assist (Side Assist / Blind Spot Sensor) * Driver assistance system: Parking Assistant * Driver assistance system: Parking assist front and rear with active side protection * Driver assistance system: Parking assist front and rear * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home) * Spare wheel in driving condition incl. onboard tools and jack * Onboard tools and jack * Airbag driver / passenger side, passenger airbag can be deactivated * Floor covering in the cargo area, universal wooden floor with lashing rails, adjustable * Suspension: damping and stabilizers reinforced, front and rear * Folding remote key (2) * Floor mats cab: rubber Dodpfx Alez N Nyns Aowc * Vehicle without lashing eyes * Rear tailgate with glazing * Climatic air conditioning (cab) * Paint: pearlescent paint * Cargo area partition with window * Marker lights on the side * Rotating beacons (2) front and rear * Rear view camera * Seats in the cab: double passenger seat with storage compartment and backrest that can be folded down to create a table * Seats in the cab: driver's seat comfort * Storage compartment above the cab (accessible from the cargo area) * Socket 230V in the cab * Sockets (12V connection) in the cargo/passenger area (2 pieces) * Rear step on the right * Paneling in the cargo/passenger area: plastic half-height * Lashing rails in the cargo area - on the partition Standard equipment: Anti-lock braking system (ABS), drive type: all-wheel drive, exterior mirrors convex, left, exterior mirrors convex, right, LED turn signals integrated in exterior mirrors, floor covering in the cab: rubber, underbody paneling, double headlights.

Condition: used, mileage: 312,498 km, power: 265 kW (360.30 HP), first registration: 10/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Air conditioning * Refrigerator * Bluetooth * Xenon headlights * Alloy wheels Dwjdpfx Aloz N Nyhj Aec Errors, changes, and prior sale are subject to change.

Condition: new, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Here is an excerpt of the equipment. Complete equipment details are available upon request. GOOSENECK: Gooseneck with SNT design to optimize the loading area length, approximately 3,700 mm long, with a taper at the rear of approximately 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. Steel front wall, plug-in, approximately 400 mm high. ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. 3 kW electric-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches. Outrigger of the gooseneck with mounting holes for screwable lashing rings. One mounting hole in the rear upper area of the gooseneck outrigger for a screwable lashing ring. 1 pair of screwable lashing rings included (LC 10,000 daN). On the gooseneck, 1 pair of plug-in aluminum side panels, approximately 400 mm high, in an anodized finish. On the gooseneck, one plug-in aluminum rear panel, approximately 400 mm high, in an anodized finish. Approximately 40 mm thick hardwood flooring above the gooseneck. 2-inch kingpin. 1 crossmember pocket rail mounted in the loading bed of the gooseneck in front of the taper, for plug-in crossmembers, approximately 100 x 50 mm. LOADING AREA: Loading area in an extendable design, approximately 8,800 mm long, with a taper at the rear of approximately 500 mm x 10°. A recess in the loading area that extends into the taper to accommodate the excavator arm, approximately 2,490 x 750 x 210/290 mm (L x W x H). TPMS tire pressure monitoring system according to ECE R 141. BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles steered. 3rd and 4th axles with electro-magnetic reverse locking via reverse gear and can be activated manually. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Mechanical fifth-wheel supports with 2-speed gearbox and crank. Continuous hardwood flooring approximately 50 mm thick in the loading area, interrupted between the axles (thus increasing the coefficient of friction). 1 intermediate table with a recessed loading area, approximately 300 mm wide, for the extension tube with a large cross-section and sheet metal flooring. 1 pair of lashing rings on the front crossmember (LC 10,000 daN). 6 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN). Additionally, 1 pair of lashing rings on the outside of the front crossmember of the loading area, rotated approximately 90° inwards towards the loading area (LC 10,000 daN). Extensions (galvanized), extendable approximately 230 mm on each side (without wooden planks). 1 pair of fixed wheel arches, open to the extension, approximately 700 x 410 mm (W x D), in the loading area in front of the 1st axle. Between the 2nd and 3rd axles in the loading area, 1 pair of fixed wheel arches, approximately 1,695 x 700 x 410 mm (L x W x D). 1 pair of mechanical rear supports. 245/70 R 17.5 3PMSF twin tires - brand of our choice. Djdpfx Alsz N Nxwe Aewc HYDRAULIC LOADING RAMPS: DR-15/60-900-4350-HB-HV-M. A pair of two-piece steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm. Hardwood flooring. Hydraulically foldable ramp tips. Ramps can be individually hydraulically moved outwards approximately 235 mm and inwards approximately 215 mm. Hardwood flooring on the taper of the loading area. Ramp with hardwood fl

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth wheel coupling: Fifth wheel plate with 2-inch King Pin. Dwsdpfx Aljz N Nw Hj Ajc Rear underrun protection: Compliant with EC, bolted design. Side underrun protection: Compliant with EC. Kingpin supports: 2 x 12 t kingpin supports with leveling foot and single-sided operation on the right side in the direction of travel. Axles: 2x10 t air suspension axle unit, manufactured by BPW, with disc brake approx. 430x45 mm, wheel connection center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, of which approx. 110 mm lifting and approx. 70 mm lowering. Air suspension control via hand regulator with stop function. Steering: 2nd axle mechanically forced steering. Braking system: Dual-circuit compressed air braking system compliant with EC with EBS and RSS, automatic load-dependent control, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the towing vehicle. Manufactured by Wabco. Tires: 4 tires, 385/65 R22.5 164 K on rim 11.75 X 22,5 ET 120. Fenders: Compliant with EC, 1/4 PVC fender in front of and behind the axle unit. E-rack holder: 1 double basket with mounting material for one E-rack with ET120. Load securing: - 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). - 7 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). - A hole for lashing straps every approx. 500 mm in the outer frame. Stake pockets: - 8 pairs of stake pockets in the outer frame, evenly distributed. - 4 rows of stake pockets transverse to the loading area. Stakes: - 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. - Magazine for 20 stakes inside the front wall. Front wall: Bolted corner posts filled with aluminum hollow profiles, lined on the inside with approx. 9 mm screen printing board (approx. 1,250 mm high). Floor: Approx. 28 mm Z-hardwood floor recessed in the outer frame. Lighting system: Compliant with EC, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connector on the front crossmember. Equipment: - Wheel chock with holder, double. - Warning signs according to ECE 70. - Work lights on the lamp bracket (switched via reverse gear). - Holder for rotating beacon at the rear including rotating beacon. - 2 x PVC toolbox. Painting: Chassis blasted, cleaned, and hot-dip galvanized with high quality according to the latest technology. Superstructure parts cleaned, primed, and hot-dip galvanized. Chassis: Hot-dip galvanized + RAL, please specify. Outer frame: Hot-dip galvanized + RAL, please specify. Front wall: RAL, please specify. Front wall trim: Hot-dip galvanized. Hubs: KTL black. Rims: Silver. Rear underrun protection: White (RAL 9010). Attached parts: Galvanized / KTL black.

Condition: new, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis 10110.025 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337. 11110.011 With cross member and container locking devices for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear I 11115.012 With container locking devices for accommodating: g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking devices and 3 pairs of foldable center supports. I 11116.012 Additionally, cross member and container locking devices for accommodating: f) 1 x 20' ISO container in the center 27850.060 Rear frame extension, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guide on special plastic sliders and 2 extension rollers. 27860.011 KÖGEL front frame extension, manually extendable and mechanically lockable. Designed for Directive 719/2015. 27870.010 Center frame extension, manually extendable with the tractor and mechanically lockable. Suspension I 17160.013 Axle lift mechanism on axle 1. I 17165.113 Axle lift control fully automatic, load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 17180.020 When transporting 30' and 45' containers, axle 1 CANNOT be lifted! 18330.701 Manufacturer according to choice Kögel - three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle tires L 20520.010 Wheels with internal sensors according to UN ECE R141. I 20540.174 Tires 6x 385/55 R 22.5, AUSTONE AAR603 164K. Chassis components 20110.010 Landing gear (manufacturer according to Kögel's choice) mechanically with leveling foot, 24 t lifting capacity. Single-sided operation on the right-hand side when driving. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with splash flaps. Braking / Air suspension system 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connector. I 32125.015 WABCO EBS system. Dwsdpfxsz N Nxqo Al Aec 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side when driving, in front of the axle unit. 34320.001 2 non-interchangeable coupling heads at the front ISO 1728. 34410.010 Air tanks for braking system and air reserve made of steel (EN 286-2). Electrical / Electronic 60500.021 Lamp carrier made of steel, located above the underrun protection. 61100.230 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors at the front - flashing LED side marker lights - Superseal and bayonet connectors for the lights 61910.015 2 multi-chamber tail lights with integrated LED outline lights with arm. 64300.01

Condition: new, power: 397 kW (539.77 HP), overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Vehicle Characteristics: OP6WG Long-haul transport, special purpose OP2QN 042 SZM Heavy-duty transport OP4DQ 460L Fuel tank capacity, left OPHOV 80l AdBlue tank capacity, right OPOBL Electronic Braking System (EBS) OPOBE Anti-lock Braking System (ABS) OPOCM Full Brake Assist OPOBW High-performance engine brake MAN EVBec, multi-stage OPOBR Retarder Eco, speed-dependent, multi-stage, energy-efficient OP119 Disc brakes on front axle OP1 IC Disc brakes on front lift axle OP114 Disc brakes on rear axle OPKPG Diesel engine MAN D2676 LFBI, 397 kW (540 hp), 2,650 Nm torque, Euro 6e OP5VX MAN TipMatic 12.28 OD, with Retarder 35 OPNNY Front axle tires Continental 385/55R22.5 Conti EfficientPro HS5 Steering, Remote TL OPNNO Front lift axle tires Continental 385/55R22.5 Conti EfficientPro HS5 OPNMI Rear axle tires Continental 315/70R22.5 Conti EfficientPro HD5 Drive, Remote TL OPJT7 Tire Pressure Monitoring System (TPM) with tire temperature display OP2N6 Tire pressure display for trailer OP3B5 6x2/4 OP5EV Front axle, 9,200 kg, non-driven, stub axle, steered, not liftable OP5EO Front lift axle, 8,200 kg, non-driven, straight, steered, liftable OPIYY Rear axle HY-1360, 13,000 kg, HY axle without through drive, straight, not steered, not liftable OP21Z Digital axle load display (ALM) for air-suspended axles OP2J1 Digital axle load display (ALM) for trailer/ semi-trailer OP1JD Leaf spring suspension on front axle, parabolic, 2-leaf, steel OP1 JB Air suspension on front lift axle OP1 J5 Air suspension on rear axle OP2DI Cab GX: the maximum (wide, long, extra high) OPKWP LED package Plus, headlights, fog lights, cornering lights OP1ZO Headlights, LED OP2BP Daytime running lights, LED OP2AI Fog lights, LED OP1YG Cornering lights, LED OP1Z7 Turn signals, side, LED OP2BH Headlight cleaning system OP283 2 revolving warning beacons on cab roof, 1 on the right and 1 on the left OP1YM 2 work lights on cab roof, 1 on the right and 1 on the left OPJQA Work light, LED, white OPKW2 Mirror package, exterior mirrors, electrically adjustable, heated, front mirror, curb mirror, right OP2CB Exterior mirrors, electrically adjustable with maneuvering aid, heated OP2CG Curb mirror, right, electrically adjustable, heated OP2NY Electric auxiliary heater, sleeping area OP2NT Air conditioning, Climatronic OP202 Water auxiliary heater, 4 kW OP1TN Electronic Stability Program (ESP) OP1 T2 Traction Control System (ASR) OP1TQ Cruise control ACC Stop and Go, distance-regulated OP2LZ MAN Media System Professional Navigation 12.3 inches OP2MI MAN Sound System Advanced with subwoofer OP1 RM Fifth wheel coupling JOST JSK 37 C 2 inch ZLA08 Roof lamp bracket Dsdpfx Asz N Nxkol Aswc ZLA09 NATO socket ZLA10 Floor mats ZLA12 Rear modification by MAN Essen ZLS01 CB radio LVS03 Cab TRAFFIC WHITE RAL 9016 LVS17 Aerodynamic package TRAFFIC WHITE RAL 9016 LVS26 High roof TRAFFIC WHITE RAL 9016 LVS46 Fenders behind cab TRAFFIC WHITE RAL 9016 LVS48 PU/SMC bumpers and front trim TRAFFIC WHITE RAL 9016 LVS49 Door extension and steps TRAFFIC WHITE RAL 9016

Condition: new, maximum load weight: 36,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis 10110.122 Regular ladder frame in lightweight steel construction with through-bolted crossmembers. 10115.010 With overhang of the chassis frame. 10300.108 Fifth wheel coupling plate, approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337. Suspension I 17160.010 Axle lift mechanism on axle 1. I 17165.103 Axle lift control, fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via a switch. Also possible from the cab (switch in the cab required - PIN 12). 18330.700 Manufacturer of your choice Kögel - Three-axle unit, with disc brakes Ø approx. 430 mm, insertion depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires L20520.010 Wheels with internal sensors according to UN ECE R141. 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J) Chassis Components Dwedez N Nxdjpfx Al Aec 20110.010 Fifth wheel supports (manufacturer of your choice from Kögel), mechanical with leveling foot, 24 t lifting capacity. Single-sided operation on the right side when driving. I 21070.117 Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 22070.013 Side protection device according to ECE-R73. I 25620.102 2 plastic toolboxes, waterproof, dimensions (internal) approx. 525 x 390 x 410 mm. Installation at the rear, 1x left and 1x right. 27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58. I 71800.020 1 pair of extendable warning panels (approx. 280x280mm) for overwidth loads, retroreflective red / white, with LED lighting, spiral cable and plug connection. Brake / Air Suspension System 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. I 32125.015 WABCO EBS system 33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Driving position is automatically set. 34320.001 2 fail-safe coupling heads at the front ISO 1728 34410.010 Air tanks for brake system and air reserve made of steel (EN 286-2). Floor 40510.120 Flat floor, approx. 30 mm thick I 40513.020 Floor caulked around the entire perimeter I 40542.023 Pockets for square tube inserts approx. 80 x 80, arrangement according to drawing J9: 8 pieces of pocket rail strips (18 pocket recesses per strip: 4 pieces each on the outside + 10 pieces in the middle). Front Wall I 40532.260 Storage for max. 20 square tube inserts 80 x 80 (length 1,990 mm) on the inside of the front wall. I 41710.201 Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, screwed / riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front end panel according to EN 12640. Side Wall 43540.380 Va

Condition: new, maximum load weight: 37,820 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Chassis 10110.030 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337. K11110.893 With crossmember and container locking devices for accommodating: a) 1 x 20' container, flush at the rear. b) C715 Vehicle equipped with Quick-Lock locking devices! Suspension I 17160.013 Axle lift mechanism on axle 1. I 17165.113 Control of the axle lift, fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). 18330.701 Manufacturer of choice: Kögel - three-axle unit, with disc brakes Ø approx. 430 mm, installation depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires L20520.010 Wheels with internal sensors according to UN ECE R141. 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J). Chassis Components I 20110.012 JOST landing gears, mechanical with compensating foot, approx. 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5-inch tires consisting of: 3 pairs of semi-circular fenders with Dwodez N Nw Tjpfx Al Aoc splash flaps. 21300.001 2 chock blocks with holder. 27510.130 Rigid rear underrun protection made of steel according to ECE-R58, in a bolted design. Braking / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638, (without connecting cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. I 32125.015 WABCO EBS system. 33420.070 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit. 34320.001 2 non-interchangeable coupling heads at the front ISO 1728. 34410.010 Air tank for brake system and air reserve made of steel (EN 286-2). Rear Impact Protection 42551.040 Solid steel rear impact protection on the rear end crossmember. Electrical / Electronics 60500.055 Lighting carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED outline lights and reflectors at the front. - Flashing LED side marker lights. - Superseal and bayonet connections for the lights. I 61910.120 2 LED multi-chamber tail lights with integrated LED outline lights with arm. K64100.932 Adapter spiral connecting cable (4m) from 15-pole socket to 2x7-pole plugs. Does not comply with ADR regulations! 64300.017 Front socket connection, 15-pole ISO 12098 (without connecting cables). I 65250.152 2 LED reversing lights (manufacturer of our choice) mounted on the rear end crossmember. The operator must ensure sufficient electrical protection of the towing vehicle (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3). K 68000.993 Complies with vehicle class EX/II, EX/III, FL, AT. Information Systems L69100.073 Tire pressure monitoring system according to UN ECE R141. Signage I 71100.030 1 hazardous goods sign, neutral

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Djdpfoz N Nx Dox Al Aowc GOOSENECK: Gooseneck designed as a loading platform with a surface made of aluminum tear-plate sheeting. Hydraulic lifting drawbar, adjustable by approximately -280/+250 mm. Two kingpin positions at approximately 2,300 mm and 2,000 mm. For semi-trailer: 4 x 2, 6 x 2, or 6 x 4. - 2-inch kingpin. - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN). - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets. - 24N connection according to ISO-1185. - 24S connection according to ISO-3731. - 15-pin connection according to ISO-12098. - Yellow-red air couplings on the front connection bar. - Lighting for the operation of the gooseneck, suspension, and hydraulic locking, with on/off switch. - Brackets for hanging the supply lines on the front of the gooseneck. - Operation of all work lights in the gooseneck area via on/off switches on the gooseneck (operation of the work lights from the semi-trailer is not possible in this case). LOADING PLATFORM: Loading platform, length approximately 9,500 mm, with angle profiles attached underneath to accommodate the load pallets (distance from kingpin to center of axle unit approximately 8,000 mm). - BPW axle stub, with drum brakes and single-wheel suspension, hydraulic axle equalization with lifting and lowering mechanism. - Lowering lock on the axles in case of suspension air spring failure, designed for a maximum pallet height of 150 mm. - 385/65 R 22.5 (M+S) - Manufacturer of our choice. - Mechanical drop-side supports for approximately 48,000 kg of support load. - Access ladder mounted on the front right with 2 retractable handrails. - Removable full fender on both sides in front of the axle unit. - WABCO Roll Stability Support (RSS). - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN). - Grid flooring support on the longitudinal beams, at the same height between the guide rails of the load securing system. - The first and last axle on the left and right can be manually lifted. - Storage box on the left and right behind the axle unit, protected from splashing water. - Beveled rear end for easier insertion of the load pallet. - Eyelets attached to the rear crossmember for mechanical locking. - Rear door with cross bracing, hinged on the left and hydraulically locked on the right, can be locked horizontally at 90°, 105°, and 270°. - Underrun protection that can be folded upwards for the transport of up to 4 empty standard pallets. - License plate with holder including lighting on the rear door. - One 7-pin socket on the rear crossmember. - Electro-hydraulic unit for operating the hydraulic functions (without installation in the semi-trailer). - TPMS tire pressure monitoring sensors installed in all wheels. - TPMS tire pressure monitoring system according to ECE R 141. - Indicator lights to display the nominal ride height in the vehicle control area. - 1 odometer mounted on the left. - 2 axle load gauges mounted on the left side, including axle load diagram. - 2 rubber buffers in the front of the loading platform as a stop for the load pallet. - Hydraulic preparation including control for the installation of 4 pairs of our hydraulic load securing systems. - 1 spare wheel holder on the right in the direction of travel. - Acoustic warning signal

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Below is an excerpt of the features. Complete equipment list available upon request. GOOSENECK Dwodjz N Nx Ropfx Al Aoc Gooseneck with a rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. - 2-inch kingpin - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5 kg). LOADING AREA 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying at the front in the loading area (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. - On the gooseneck and at the rear, left and right, one holder each for the warning signs, including a socket. - A galvanized steel front wall. - 3 height-adjustable wooden planks. - Galvanized folding supports under the slope of the loading area. - A holder for a rotating beacon at the rear of the semi-trailer. - Height-adjustable tarpaulin superstructure, approximately 3,960 mm. - Galvanized front wall with a tensioning mechanism for the sliding curtains. - Height-adjustable by approximately 400 mm. - Roof from the EDSCHA brand, which can be moved forward on aluminum roof rail profiles. - 3 pairs of sliding rails in the loading area. - The superstructure can be hydraulically widened at the rear to the left and right by approximately 750 mm (for loading and unloading). - Sliding cover with a pivoting portal beam. - Sliding tarpaulin with approximately 700 mm of reserve in length, with tension straps at intervals of approximately 600 mm. - Height of the top edge of the superstructure approximately 3,960 mm (loaded). - Driving with the sliding cover open is not permitted and will damage the tarpaulin. - Attachment rail for aluminum ramps at the rear of the vehicle. - Control valves for the hydraulic widening of the superstructure, mounted on the right side of the semi-trailer. (± 4 kg) - White reflector tape according to EU regulations, red on the sides and rear. - Electro-hydraulic unit at the rear under the loading area. (± 45 kg) - Holder for a pair of warning signs on the front wall. - Four warning signs, approximately 400 mm extendable, approximately 423 x 423 mm, with an LED position light (± 25 kg). - On the warning signs, a holder for a rotating beacon. - 7 pairs of rail pockets for plug-in rails, approximately 100 x 50 mm, in the outer frame of the loading area (± 21 kg) - Lift axle on the front axle, controlled by TEBS-E depending on the current axle load and loading condition (± 69 kg). - 6 pairs of recessed lashing rings along the central beam (LC 5,000 daN). - 1 pair of recessed lashing rings along the central beam at the rear (LC 10,000 daN). (± 27 kg) - A painted layer of sand on the diamond plate on the gooseneck and in the loading area as anti-slip protection. - 1 LED reversing light, each on the left and right, in front of the first axle. - 2 LED work lights mounted on the rear panel. - An acoustic warning signal when reversing. ACCESSORIES - Cable for supplying the electro-hydraulic unit and/or the electric winch (approximately 35 mm², approximately 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with a plug connection (NATO-NATO). FIFTH WHEEL BRACKETS JOST fifth wheel brackets, mechanical, with a 2-spee

Condition: new, maximum load weight: 37,750 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 11110.185 With cross member and container locks for accommodating: a) 1 x 20' container in the center b) C715, C745, C782 c) 20', 23', 25' tank container Dwsdpez N Nybofx Al Aoc Suspension: I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Control of the axle lift fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab. 18330.701 Manufacturer of your choice: Kögel - Three-axle unit, with disc brakes Ø approx. 430 mm, Press-in depth approx. 120 mm. Air suspension with approx. 180 mm stroke. Vehicle tires: L 20520.010 Wheels with internal sensors according to UN ECE R141. I 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J) Chassis components: 20110.010 Kingpin supports (manufacturer of your choice from Kögel) mechanical with leveling foot, 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.169 Splash guard system (spray mist suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of: 3 pairs of semi-circular fenders with splash flaps. 25610.250 2 plastic toolboxes, waterproof, dimensions (internal) approx. 600 x 400 x 470 mm. Installation on the left and right between kingpin supports and axle unit. Meets ECE-R73 as a lateral protection device. 27510.040 Underrun protection made of steel according to ECE-R58, with mounting brackets for angled rear end. Braking / Air suspension system: 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. I 32125.015 WABCO EBS system 33420.070 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit. Tank equipment: 37100.100 Walkable work platform, can be removed for cleaning, consisting of a 1-piece grating, galvanized, mounted at the height of the underrun protection profile between the longitudinal beams. I 37150.031 Ladder with 3 galvanized grating steps, mounted on both sides. I 37200.020 With galvanized grating walkway, mounted on the rear end, flush with the upper edge of the longitudinal beam. I 37300.010 Drip pan made of stainless steel (bottom) with 2-inch drain connection and shut-off valve, mounted under the work platform and drip pan made of stainless steel in the middle of the rear container cross member. I 37500.060 4 plastic hoses Ø approx. 200 mm, approx. 5,000 mm long, with a lockable cover at the rear, protected between the longitudinal beams. 37600.010 1 grounding lug on the rear right. Electrical / Electronics: 60500.040 Light carrier made of steel, arranged above the underrun protection. Lower mounting position. 61100.220 KÖGEL LUXIMA Premium package, consisting of: - LED license plate lighting, LED side marker lights and reflectors at the front - flashing LED side marker lights - Superseal and bayonet connectors for the lights 61

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the near future, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, approximately 30 mm thick. Load platform in extendable design: Load platform in extendable design with rear bevel of approximately 1,000 mm x 8°. Djdpoz N Nwyofx Al Aowc 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 3 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings located horizontally at the front of the load platform (LC 10,000 daN) Recesses in the outer frame of the load platform for attaching lashing straps (LC 2,000 daN) Hardwood flooring, approximately 48 mm thick; diamond plate flooring over the axles. Kingpin: JOST kingpins (mechanical) with 2-speed gear for approximately 24 tons lifting capacity (approximately 50 tons test load) Tires: Tires 235/75 R 17.5 3PMSF TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles: BPW axles and suspension, 2 fixed axles, 1 steered axle. Technical axle load: 12,000 kg each. Electro-magnetic parking brake activated via reverse gear and manually. Air suspension with raising and lowering valve. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the semi-trailer tractor. Steel construction: Steel construction made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, in accordance with the RAL 841GL system. Rims in silver gray. Rear section metallic and painted in RAL 9010 (pure white). Paint structure tested in the salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098. Included accessories: 2-inch Kingpin One galvanized steel front panel, approximately 400 mm high. One spare wheel holder in front of the front panel. Yellow-red air couplings on the galvanized connection bar at the front. Mounting in the rear area of the gooseneck for aluminum approach ramps. Galvanized folding supports under the bevel of the load platform. On the gooseneck and on the rear panel, one holder each on the left and right for warning signs including socket. Load measuring device for determining the axle loads including load diagram. On the gooseneck, aluminum side walls and rear wall, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized locking stakes are removable (overall length approximately 2,560 mm). One galvanized toolbox, integrated in the beveled gooseneck. 3 pairs of WADER container pockets in the load platf

Condition: used, mileage: 394,000 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Spoiler package, leaf air suspension, outside temperature display, differential lock, air brake system, sun visor, spacious cab, air-suspended seat, color monitor for navigation system, distance control cruise control, heated exterior mirrors, electrically adjustable exterior mirrors, CB radio, auxiliary air conditioning, brake pad indicator, distance warning system, roof spoiler, tachograph, auxiliary drive, full spoiler, auxiliary tank, twin tires, air brake system, used vehicle Dwsdpfxsz N Nwgj Al Aec Vehicle No. 3481, ABS, TC, XG cab with 2 beds, ACC, lane assist, comfort leather seats, driver's seat with ventilation + heating, microwave, auxiliary air conditioning, automatic climate control, auxiliary heater, CB radio, automatic transmission, retarder/intarder, full spoiler package, 2 aluminum diesel tanks, aluminum hydraulic oil tank, sliding floor + tipping hydraulics, LED lighting, front tires: 385/65 R 22.5, rear tires: 315/70 R 22.5, unladen weight: 8,144 kg, permissible total weight: 18,000 / 20,500 kg, 1st owner, VEHICLE HAD A MAINTENANCE CONTRACT WITH DAF!!!, For inquiries, please contact us, errors and prior sale reserved.

Condition: used, Year of construction: 2008, operating hours: 7,647 h, Twin tires, used vehicle Vehicle no. 3477, CAT M313D mobile excavator, year of manufacture: 2008, operating hours: 7,647, fully enclosed cab with air conditioning, adjustable boom, CAT diesel engine with 116 kW, twin tires, tire size: 10.00-20, dozer blade, radio, hydraulic connections for attachments, hydraulic quick coupler for the boom, 1x grapple, 1 x 1,800 mm hydraulic ditching bucket. For inquiries, please contact or . Errors and prior sale excepted. Djdpfxjz N Nwmo Al Aowc

Condition: used, Year of construction: 2010, operating hours: 8,012 h, Rubber tracks, used vehicle Dwsdpfoz N Nwtex Al Ajc Vehicle no. 3475, Takeuchi TB153FR mini excavator/compact excavator, year of manufacture: 2010, operating hours: 8,012, operating weight: 5,610 kg, fully enclosed cab with ventilation, radio, 400mm rubber tracks, 2,000mm dozer blade, Yanmar diesel engine with 29.5 kW, hydraulic connections for attachments, HELAC Powertilt, Lehnhoff quick coupler SW03, 1x digging bucket 1,200 mm, 1x 800mm deep digging bucket, 1x 900mm deep digging bucket. For inquiries, please contact or . Errors and prior sale are subject to change.

Condition: used, Year of construction: 2026, 40-foot High Cube container / As good as new! ----* Year of manufacture: 2026 * As good as new, used only once * Tare weight: approx. 3,700 kg * Gross weight: 32,500 kg * Payload: 28,800 kg * Good condition. Used only once * Price: 2,900 Euros, net + 19% VAT ----For further questions, please call: Dwedpfx Alsz N Nzls Ajc Erik Kortum: WhatsApp ?All information is provided without guarantee and subject to errors and prior sale.?

Condition: used, Year of construction: 2023, operating hours: 381 h, Bomag BW100ADe-5 roller from the year 2023 with only 381 operating hours! Electric! ----* Manufacturer: Bomag * Type: BW100ADe-5 * Year of manufacture: 2023 * Recorded operating hours: approx. 381 * Electric Dodpfez N Nyzex Al Aowc * Edge cutter (KSG) * Heated seat * Operator protection roof * LED * Top condition * Power: 19.2 KW * Video available upon request (WhatsApp ERIK) * CE declaration available * Price: 22,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Condition: used, mileage: 242,950 km, power: 175 kW (237.93 HP), first registration: 05/2014, fuel type: diesel, overall weight: 1,990 kg, axle configuration: 2 axles, Equipment: all wheel drive, Mercedes Unimog U400 with Breining U-Tank 2000 Bitumen Sprayer! ----* Manufacturer: Mercedes-Benz * Type: Unimog U400 * First registration: * Recorded mileage: approx. 242,950 km * Recorded operating hours: approx. 11,448 * Video available upon request * German vehicle * German registration * Superstructure: * Manufacturer: Breining * Type: U-Tank 2000 * Year of manufacture: 2002 Dwedjz N Ny Iopfx Al Aec * Sprayer bar width: approx. 2 meters * Bitumen tank: 1,600 liters * Water tank: 400 liters * With front sweeping brush * Price: 39,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 969 h, Equipment: all wheel drive, Ausa D100 AHG dumper from 2016 with a rotating dump bed! ----* Manufacturer: Ausa * Type: D100 AHG * Year of manufacture: 2016 * Recorded operating hours: approx. 969 * Payload: 1,000 KG * Operating weight: 1,300 KG Dodpfx Aloz N Ny Uj Aswc * Kubota diesel engine * Rotating dump bed * First owner * CE declaration available * More photos + video available upon request (WhatsApp Erik) * Price: 9,500 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, subject to errors and prior sale.

Condition: used, Year of construction: 2014, operating hours: 11,448 h, Equipment: all wheel drive, Mercedes Unimog U400 with Breining U-Tank 2000 Bitumen Sprayer! ----* Manufacturer: Mercedes-Benz * Type: Unimog U400 Dwsdpfx Alsz N Nzfe Asc * First registration: * Recorded mileage: approx. 242,950 km * Recorded operating hours: approx. 11,448 * Video available upon request * German vehicle * German registration * Superstructure: * Manufacturer: Breining * Type: U-Tank 2000 * Year of manufacture: 2002 * Sprayer bar width: approx. 2 meters * Bitumen tank: 1,600 liters * Water tank: 400 liters * With front sweeping brush * Price: 39,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: used, mileage: 89,722 km, power: 103 kW (140.04 HP), first registration: 09/2022, fuel type: diesel, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always available on our premises. The vehicle is located in Leipzig! The vehicle is located in Leipzig! The vehicle is located in Leipzig! Special features: Dsdpfx Aloz N Nr Rj Ajwc Storage compartment in the driver’s cab roof liner, storage compartments: luggage net on the rear doors, audio system: UConnect with Bluetooth, exterior mirrors electrically adjustable and heated, reinforced rear axle (suspension), automatic climate control, fuel tank: 90 liters, headlight trim in black, seat cover/upholstery: Flockato fabric, seat base trim, pre-wiring for electrical superstructure Additional features: Airbag on the driver’s side, windows in the cargo/passenger compartment: sliding, 2nd row, rear wing doors with glazing, heated rear window, body/superstructure: standard high-roof station wagon, padded headrests, heated crankcase ventilation, adjustable steering column (steering wheel), engine 2.3 L - 131 kW turbo diesel Multijet, wheelbase 4035 mm, tire repair kit, low emissions according to emissions standard Euro 6d-TEMP, sliding door cargo/passenger compartment on the right with glazing, seats in the driver’s cab: driver’s seat with armrest and lumbar support, seats in the cargo/passenger compartment: 3rd row, 3-seater bench, with armrests, start/stop system engine, socket in the cargo/passenger compartment, auxiliary heater in the rear The vehicle is located in our external storage facility; therefore, please contact us to arrange a viewing. Thank you very much! Subject to price changes, typing errors, and errors; vehicle may be sold in the meantime.

Condition: used, mileage: 121,695 km, power: 103 kW (140.04 HP), first registration: 02/2023, fuel type: diesel, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please feel free to contact us by phone or email to arrange a viewing appointment. The vehicles are not always directly available on our premises. Special equipment: Dwsdpez N Nr Dofx Al Asc Storage compartment in the cab roof liner, storage compartments: luggage net on the rear doors, audio system: UConnect with Bluetooth, exterior mirrors electrically adjustable and heated, reinforced rear axle (suspension), automatic climate control, fuel tank: 90 liters, headlight trim in black, seat cover/upholstery: Flockato fabric, seat base trim, pre-wiring for electrical superstructure Additional equipment: Airbag for driver, windows in the cargo/passenger compartment: sliding, 2nd row, rear hinged doors with glazing, heated rear window, body/superstructure: standard high-roof van, padded headrests, heated crankcase ventilation, adjustable steering column (steering wheel), engine 2.3 L - 131 kW turbo diesel Multijet, wheelbase 4035 mm, tire repair kit, low emissions according to emission standard Euro 6d-TEMP, sliding door cargo/passenger compartment on the right with glazing, seats in the driver's cab: driver's seat with armrest and lumbar support, seats in the cargo/passenger compartment: 3rd row, 3-seater bench, with armrests, start/stop system, socket in the cargo/passenger compartment, auxiliary heater in the rear The vehicle is located in our external warehouse, so please contact us to arrange a viewing. Thank you very much! Subject to price changes, typographical errors and omissions, as well as prior sale.

Condition: used, mileage: 106,478 km, power: 103 kW (140.04 HP), first registration: 09/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,855 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always available on our premises. Djdpfjz N Nrwjx Al Aswc Vehicle is located in Leipzig! Vehicle is located in Leipzig! Vehicle is located in Leipzig! AdBlue: 30L Cargo space, volume [m3] 16.42 Side sliding door, width x height [mm] 1,311 x 1,8223 Rear wing doors, clear width x height [mm] 1,552 x 1,8404 Loading edge height at the rear [mm] 5705 (725) Turning circle [m] 16.2 Distance between wheel arches (mm) 1,380 Permissible trailer load (braked) 3000 kg Permissible trailer load (unbraked) 750 kg Vertical load at the coupling point 120kg Maximum permissible total weight of the vehicle combination 6000 kg 2x2 airline rail (bottom + top) The vehicle is located in our external storage facility, so please contact us to arrange a viewing. Thank you very much! Subject to price changes, typographical errors, and errors, as well as prior sale.

Condition: used, mileage: 768 km, power: 184 kW (250.17 HP), first registration: 03/2026, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New vehicle, 12 tons. MAN TGL 12.250 4x2 truck, new TG3 model with 250 hp, Meiller 3-way tipper and crane preparation, payload of 6,600 kg, trailer hitch (pintle + ball), GVWR 24,000 kg, air conditioning, differential lock on rear axle, air-suspended rear axle, reversing camera, extended MAN manufacturer's warranty, and more. Equipment: Warranty extension Truck total vehicle warranty until 03/19/2028 or up to 100,000 km Truck ATG and ATG+ warranty until 03/19/2030 or up to 240,000 km Mileage approx. 768 km Cab CC short with 3 seats and rear window Wheelbase 3,600 mm Unladen weight 5,390 kg Payload 6,600 kg Engine Euro 6 E with 250 hp and 1,050 Nm of torque Drive 4x2 Meiller Trigenius D208, 3-way tipper approx. 3.8 m x 2.35 m x 0.50 m high with crane preparation Headboard 0.70 m high Side walls and rear wall of tipping body 1.5 mm, M-JET, steel HBW 240 Floor of tipping body made of steel HBW 450, 4mm Recessed tie-down points in the floor panel Rear wall of tipping body pivoting Automatic transmission MAN PowerMatic 08.13 OD Differential lock in rear axle Air conditioning Trailer hitch, pintle, Ringfeder type RF40/G145A with air pressure connections Trailer hitch, ball head for trailer loads up to 3,500 kg and with rear impact guard Trailer load with continuous braking system 13,000 kg Trailer load with continuous braking system 14,438 kg technically possible Permissible total weight 24,000 kg Front axle leaf-sprung and rear axle air-sprung Front axle 4,800 kg, HY rear axle 8,700 kg Front axle load 4,700 kg, rear axle load 8,700 kg Axle ratio, i=4.11 Stabilizer for front and rear axle Shock absorbers on front and rear axle Full brake assist EBS with ABS and ASR ESP Emergency brake assist EBA Lane departure warning LDW MAN Attention Guard Preparation for alcohol interlock Front detection Traffic sign recognition Cruise control Disc brakes on front and rear axle Sun visor 2 work spotlights on the cab roof Daytime running lights LED Roof hatch Multi-function steering wheel Electrically adjustable and heated exterior mirrors Electr. power windows Reversing camera Professional instrument cluster 12.3 inches MAN Media System Advanced 7 inches Driver seat package Plus with air suspension, belt height adjustment and seat heating Driver comfort seat, air-sprung MAN sound system New vehicle with day registration in 03/2026 and extended MAN manufacturer's warranty Price NET, plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale excepted. Dwodsz N Nqtopfx Al Asc Internal vehicle number: 2601