Laser solutions d.o.o.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Nede Afwzwjpfx Ag Iewn Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: new, We offer a Lantek software package (CAD/CAM + MES) as a perpetual license. The license is valid indefinitely and was acquired in 2025. CAD/CAM scope of supply: - Lantek Expert II Cut (v44) – 2D CAD/CAM for laser, plasma, flame, and waterjet cutting - High-Performance Nesting (NOS) module for maximum sheet metal utilization - Postprocessor Yawei Laser / Siemens 840D (PstYaw08) - Lantek Server Dongle (Floating License, network-compatible, also for VM installation) Njdj Afu Afopfx Ag Iswn MES scope of supply: - Lantek MES Manager including 1 additional license (2 workstations) - MES monitoring of work centers - MES inventory management (sheet metal and scrap plate inventory) - MES WOS work center (Yawei laser) New list price: approx. €38,500 net Selling price: €24,000 net Notes: - Sale only as a complete package. - The license will be completely deactivated with us after the sale. Transfer or re-registration is done via Lantek. - Maintenance contract, services, and training are not included in the scope of supply. A maintenance contract can be concluded with Lantek. - The postprocessor is designed for Yawei lasers with Siemens 840D control. For other machines, a suitable postprocessor from Lantek is required. Manufacturer: Lantek Model: Expert II Cut + MES Manager If you have any questions, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Nwsdpfx Ae Adzppeg Ien Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: ready for operation (used), Year of construction: 2024, laser power: 12,000 W, number of axes: 3, This 3-axis Bodor P3-G3 fiber laser cutting machine was manufactured in 2024. It features a powerful 12,000W laser, providing efficient cutting capabilities for various materials. If you are looking to get high-quality cutting capabilities, consider the Bodor P3-G3 machine we have for sale. Contact us for further details. Nwsdpfx Ags Adu D Hs Ijn Length of work table: 3000mmWork table width: 1500mmWorking table capacity: 1450kgTable type: Interchangeable - automaticMaximum acceleration: 4.0GMaximum speed: 200m/minMachine dimensions: 8840*2240*2520mmMachine weight: 6500kg +/- 10%Maximum cutting thickness: 45mm (Black steel), 40mm (stainless steel), 40mm (aluminum)

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Max. table load kg: 1.500 DIMENSIONS Nwjds Aa A Tujpfx Ag Ion Machine weight kg: 23.900 EQUIPMENT & OPTIONS • Mazatrol L32B CNC control • CO2 laser resonator, 4,000 W rated output

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 22,000 h, machine/vehicle number: 10060677, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, laser type: fiber laser, laser source manufacturer: IPG, laser source model: Modul, laser hours: 13,500 h, laser power: 6,000 W, laser wavelength: 1 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,100 mm, table width: 1,700 mm, table height: 900 mm, travel distance X-axis: 1,560 mm, travel distance Y-axis: 3,090 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 50 m/min, workpiece weight (max.): 920 kg, input voltage: 400 V, input current: 75 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 12,000 kg, total length: 10,500 mm, total width: 6,200 mm, total height: 2,500 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, BystarFiber with ByTower (storage tower) and ByTransExtended (automation). Cooling can be installed as a platform above the machine. The machine is serviced annually by Bystronic, and all laser modules have already been replaced. Nwedpez S Nb Rjfx Ag Ion

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Nsdoz S Egijpfx Ag Iown Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: good (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision Cutting, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 13,777 h, laser power: 10,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 11,900 mm, total width: 5,700 mm, total height: 3,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 10 kW Bystronic fiber laser – Swiss premium technology, available from 01.03.2027. We are selling our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production – no dealer, no middleman margin. The machine is in production until handover, so you can inspect it under power and watch it cut your own parts before you decide. WHY THIS MACHINE Nedpfsz Smx Uex Ag Ijwn • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminium up to 30 mm, brass 15 mm, copper 12 mm – one machine from thin to thick sheet • Dynamic Edition: 120 m/min axis-parallel, 170 m/min simultaneous – high throughput for series and rush jobs • Automatic nozzle changer with 64 positions + Detection Eye: shorter set-up times, low-manned production possible • Shuttle table (25 s change time): load and unload while the machine cuts • Dust extraction included • List price of this configuration: over EUR 750,000 TECHNICAL DATA • Manufacturer / model: Bystronic ByStar Fiber 3015 Dynamic Edition F10000 • Year: 2017, made in Switzerland, CE • Laser source: fiber 10,000 W (range 1,000–10,000 W), 1060–1080 nm • Sheet size: 3,000 × 1,500 mm • Working range X / Y / Z: 3,100 / 1,580 / 100 mm • Repeatability: 0.025 mm (ISO 230-2) • Max. workpiece weight: 1,100 kg • Control: Bystronic ByVision Cutting with 21.5" touchscreen • Operating hours: 28,646 h / cutting hours: 13,777 h (as of 10/2026, read directly from the control – photo available) • Total weight: approx. 12,000 kg • Dimensions L × W × H: approx. 11,900 × 5,700 × 3,200 mm EQUIPMENT Bystronic cutting head V2, Spot Control, collision protection, automatic nozzle centering, nozzle cleaning, ByPos Fiber, Cut Control Fiber, Piercing Jet, laser diode pointer, scanning, chiller with tank heating and tropicalization, UPS, Condition Messenger, Maintenance Messenger, cutting plan editor, Restart Manager, cutting parameter assistant, OPC interface, hand-held control unit, complete documentation. AVAILABILITY Ready for collection from 01.03.2027. You can reserve the machine now and prepare floor space, foundation and financing at your own pace – handover takes place on the fixed date, as soon as our new machine is delivered. Good 10 kW Bystronic fiber lasers are rare on the used market. Whoever inspects first has the best chances. Location: 51709 Marienheide (NRW, Germany). Price net ex works (EXW), negotiable. Sale to businesses only, without any warranty. Errors and prior sale excepted. All information without guarantee. Call or write to us – we will gladly send you more photos and videos of the machine in operation and arrange an inspection appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision Cutting, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 19,520 h, laser power: 10,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 11,900 mm, total width: 5,700 mm, total height: 3,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 10 kW Bystronic fiber laser – Swiss premium technology, available from 01.03.2027. We are selling our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production – no dealer, no middleman margin. The machine is in production until handover, so you can inspect it under power and watch it cut your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminium up to 30 mm, brass 15 mm, copper 12 mm – one machine from thin to thick sheet • Dynamic Edition: 120 m/min axis-parallel, 170 m/min simultaneous – high throughput for series and rush jobs • Automatic nozzle changer with 64 positions + Detection Eye: shorter set-up times, low-manned production possible • Shuttle table (25 s change time): load and unload while the machine cuts • Dust extraction included • List price of this configuration: over EUR 750,000 Nsdpfez Smfhsx Ag Ijwn TECHNICAL DATA • Manufacturer / model: Bystronic ByStar Fiber 3015 Dynamic Edition F10000 • Year: 2017, made in Switzerland, CE • Laser source: fiber 10,000 W (range 1,000–10,000 W), 1060–1080 nm • Sheet size: 3,000 × 1,500 mm • Working range X / Y / Z: 3,100 / 1,580 / 100 mm • Repeatability: 0.025 mm (ISO 230-2) • Max. workpiece weight: 1,100 kg • Control: Bystronic ByVision Cutting with 21.5" touchscreen • Operating hours: 39,770 h / cutting hours: 19,520 h (as of 10/2026, read directly from the control – photo available) • Total weight: approx. 12,000 kg • Dimensions L × W × H: approx. 11,900 × 5,700 × 3,200 mm EQUIPMENT Bystronic cutting head V2, Spot Control, collision protection, automatic nozzle centering, nozzle cleaning, ByPos Fiber, Cut Control Fiber, Piercing Jet, laser diode pointer, scanning, chiller with tank heating and tropicalization, UPS, Condition Messenger, Maintenance Messenger, cutting plan editor, Restart Manager, cutting parameter assistant, OPC interface, hand-held control unit, complete documentation. AVAILABILITY Ready for collection from 01.03.2027. You can reserve the machine now and prepare floor space, foundation and financing at your own pace – handover takes place on the fixed date, as soon as our new machine is delivered. Good 10 kW Bystronic fiber lasers are rare on the used market. Whoever inspects first has the best chances. Location: 51709 Marienheide (NRW, Germany). Price net ex works (EXW), negotiable. Sale to businesses only, without any warranty. Errors and prior sale excepted. All information without guarantee. Call or write to us – we will gladly send you more photos and videos of the machine in operation and arrange an inspection appointment.

Condition: excellent (used), Trumpf TruTool C160-2 Plus electric slotting shears. Nedpfxez Sb Iks Ag Ijwn The shears are in very good condition.

Condition: ready for operation (used), Year of construction: 2024, laser power: 6,000 W, This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine. • Capacity: Cuts pipes up to 8.5 m in length and up to 280 mm in diameter Nwedpfx Asz R Swasg Ion

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Njdez R Dz Ajpfx Ag Iewn Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Nwedpfez Rzikox Ag Isn Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, TruLaser Cell 3000 5 axes (rotary table and tilting head) Max. travel in X: 800 mm Max. travel in Y: 600 mm Max. travel in Z: 400 mm Max. travel in B: +/- 135° Max. load per side: 98 kg Rotary plate diameter: 1,070 mm Nwjdpfx Agjz Rpnze Ien Max. axis speed: 85 m/min Max. laser output: 8000 W Max. power at the workpiece: 3000 W Beam quality: 4 mm*mrad

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Nwjdpez N Dutofx Ag Ien Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Nwjdpfx Aez Npdgog Ijn Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: good (used), functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, 6 kW Bodor Laser Cutter. 2 Years old with low usage (less than 4 hours per week). Comes complete with mezzanine floor to raise chillers, air compressors and extractors out of the way. Cuts up to 20mm thick hardox on Oxygen. Cuts up to 6mm mild steel on Compressed Air. Nodpfxez Niv Ae Ag Ijwn Automatic door and work bed. Manual part trays underneath.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,802 h, controller manufacturer: BYSTRONIC, controller model: ByVision, This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine. Additional information • Type: Fiber Laser Condition: Very good, regularly renovated • CNC control system: BYSTRONIC ByVision with touchscreen and remote control for cutting parameter modification • Work table size (length x width): 6500 mm x 2000 mm • Laser power: 6 kW • Laser beam wavelength: 1060-1080 nm • Cutting head: Equipped with integral capacitive height sensor for precise beam control Nsdpfez Ndwkjx Ag Ijwn • Maximum cutting thickness for carbon steel: Up to 20 mm • Materials processed: Carbon steel, copper, brass

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg Nwsdpfx Aoz I S Uwjg Ien EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. Nwedpfx Agjz I N Tkj Ijn We will be happy to answer any further questions by telephone.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m Njdpfez Ii A Sex Ag Iown The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 065980102, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Adige, laser type: CO₂ laser, laser power: 50 W, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 140 mm, pipe length (max.): 6,000 mm, input voltage: 400 V, input current: 85 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,500 kg, total length: 2,300 mm, total width: 1,500 mm, total height: 8,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, Used Adige industrial laser machine for cutting sheet metal, with an integrated control panel and automated system for metal processing. Laser Tubic for cutting pipes and metal profiles, suitable for cutting square, rectangular, and round pipes. Year of manufacture: 1999. YouTube video: Fortza.ro or on WhatsApp. The machine is in perfect working order and in good condition. Cutting dimensions up to 14 cm. Optionally, for an additional fee, the company offers servicing, dismantling, and relocation services for the machine, including assistance with preparing it for transport and reinstallation. Nsdez H Truspfx Ag Iewn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 17,600 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 5,000 W Steel sheet thickness: max. 20 mm Stainless steel sheet thickness: max. 15 mm Aluminum sheet thickness: max. 10 mm Cutting speed: max. 60/85 m/min Accuracy: ± 0.1 mm Table dimensions: 3,000 × 1,500 × 115 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 9,300 x 4,600 x 2,000 mm Total weight: 13,140 kg Nwsdpfoz Hxu Usx Ag Ien Operating hours Beam on: approx. 17,600 h Laser on: approx. 45,500 h

Condition: good (used), functionality: fully functional, For sale: a Liftmaster for handling GF 1500x3000m sheet sizes. The machine is in storage and available immediately. Nedez Hvkyjpfx Ag Iown

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Nwodjz E R Idopfx Ag Ijn Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.