Centerless Bv

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm Rsdpfx Aeyycggsb Isbw * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B Redpoyycd Ejfx Ab Iobw dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min.

Condition: good (used), Year of construction: 2011, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret, 22KW Motor, Main spindle 4000rpm. milling -spindle 5000rpm, Rbodpfx Ajyyakvob Ijw Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm Rodpfsyx U Hiex Ab Ijbw * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: good (used), Year of construction: 2015, HAAS ST 30 SSY CNC Turning-Milling Center Year of manufacture: 2015 Control System: HAAS Machine No.: 3102813 Only approx. 9,950 operating hours (as of 25.03.26) Features: CNC turning-milling center with Y-axis Travel paths: max. 406 mm x 584 mm Swing diameter: 806 mm Y-axis travel: ±50.8 mm Vector drive (22.4 kW) 4,500 RPM A2-6 spindle 10-inch chuck (254 mm) Hybrid turret with 24 tool stations (12 VDI/12 BOT) Driven tools with higher torque and C-axis 15" LCD color display Memory lock key switch Spindle orientation USB port Synchronized tapping Automatic tool presetting system Hinged belt chip conveyor Parts catcher Programmable hydraulic tailstock Ethernet interface "Visual Quick Code" programming system Redpoyx Dwqjfx Ab Ijbw VectorCam Turning - HAAS Edition Special HAAS bar feeder Ø 76 mm Hainbuch collet chuck combo, Axial-pull, size 80 Chip guard for GR80 Vario Quick standard stop system, size 80 Scope of delivery includes: BOT/VDI holders / turret Turning tools Hainbuch collets Collets for tools Driven tools Hinged-door tool cabinet Machine mounting elements Chip trolley Operating manual/documentation Machine parameters on USB stick Features, technical data, manufacturer's brochure, and machine layout – see PDF. Illustration, content, and details are provided without guarantee and are therefore not binding. All other accessories visible in photos and videos are not included in the delivery scope and are therefore not part of this sale. The scope of delivery includes only the accessories expressly listed here, in the order confirmation, and the invoice. FCA (Free Carrier, loaded truck) D-32457 Porta Westfalica Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase

Condition: excellent (used), Year of construction: 2007, operating hours: 10,066 h, functionality: fully functional, CTX 410 V3 2-axis universal lathe with HEIDENHAIN Plus iT CNC control and SlimLinePanel - C-axis - Driven tools - AC main drive 21 kW, 240 Nm - Sauter disc turret - Partial hollow clamping device Rbjdoyx Ax Tjpfx Ab Iow - Chip conveyor - Tailstock Turret disc with 12 tool stations, shank diameter 40 mm according to DIN 69880 instead of diameter 30 mm Bar machining package consisting of: - Hydraulic hollow clamping device Pull tube inner dia. max. 66 mm - Workpiece removal unit, pneumatically swiveling for parts Ø65 mm x 120 mm long, - 4-color signal light (Note: Additional connection for bar feeder or bar loading magazine required)

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Rodpfjyxxhqjx Ab Isbw

Condition: excellent (used), Year of construction: 1995, turning length: 710 mm, Specifications: Control system: Siemens Rbjdpfx Abeyxrczj Isw Maximum turning length: 710 mm Maximum turning diameter: 270 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Rjdpfsyxqniox Ab Isbw Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, TECHNICAL DETAILS: Manufacturer: DMG Gildemeister Model: NEF 400 Year of manufacture: 2009 Control system: Heidenhain Power supply: 400 V / 50 Hz Rodpjyxqa Eofx Ab Iobw Connected load: approx. 21 kVA Current: 31 A Control voltage: 230 V / 24 V Cable specification: L ≤ 5 m, 230 V – 150 W Made in Europe

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Time recording from Feb. 2025 Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15 +725 mm Y-axis travel -245 + 4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG; 3135 N;/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105 +95° Vertical travel (Y-axis) -250 +250 mm SR5 steady rest with eccentric fine adjustment 45–310 mm C8 tool system Tool magazine (2 magazines) 144 Tailstock Rbjdpfx Asyxp H Dob Ijw Quad diameter MK6 180 mm Quad stroke 170 mm Quad force (adjustable) 5–28 kN Quad fine adjustment +/- 0.15 mm Optional equipment Coolant tank capacity 990 l Workpiece measurement MC (Reinshaw) Software Gear hobbing &more

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Rjdpfxsyxpz Is Ab Iobw Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO Rodpsyxpv Sefx Ab Ijbw High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Rbjdpfoyxpadjx Ab Iew Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Rjdpfx Abeyxn D Is Iebw Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Spindle speed: 6,000 rpm Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Weight: 3,500 kg Transport, collection, and dismantling must be organized by the buyer.

Condition: good (used), Year of construction: 2006, operating hours: 14,119 h, functionality: fully functional, machine/vehicle number: 6682NL151EG0306J, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, total height: 2,000 mm, total length: 2,185 mm, total width: 2,460 mm, bar diameter (max.): 45 mm, overall weight: 5,300 kg, Machine type: CNC lathe Manufacturer: DMG Mori Model: NL1500/500 Year of manufacture: 2006 Operating hours: 14,119h (as of 17.12.2025) Control: MSX-850 BM Spindle speed: 6,000 rpm Machining diameter: with bar loader Ø16-45mm Tool stations: 12 plus tailstock Weight: 5,300kg Dimensions (W×D×H): 2460×2000×2185mm Redoyxnu Hspfx Ab Iobw Transport, collection, and dismantling must be organized by the buyer.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Rbodpfx Asyxmyueb Ijw Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 7,000 rpm, spindle bore: 42 mm, controller model: Siemens 840 D - SL, counter spindle speed (max.): 7,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Rbedsyxmnxspfx Ab Isw Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Counter spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3 x 12 pos Number of live tool stations: 3 x 12 pos Rotational speed of driven tools: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Space requirement: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Knoll chip conveyor High-pressure coolant (14 bar) Parts catcher Counter spindle Interface for bar feeder Spinner Barload BL 0146 bar loading magazine C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool measuring arm

Condition: used, operating hours: 37,000 h, RS 51 MSY top spec with Collets ESA live and static tools Barfeed Renishaw Rodpfoyxh Awjx Ab Iobw Parts Catchers

Condition: excellent (used), Year of construction: 2020, operating hours: 2,139 h, functionality: fully functional, machine/vehicle number: NL257200651, turning length: 700 mm, turning diameter: 366 mm, spindle motor power: 19 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year: 2020 Condition: Excellent Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program runtime: 2,139 h Details: Base machine: NLX 2500/700 with driven tools and C-axis Universal lathe with 3 axes Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW power (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping system (see clamping cylinder/chuck) C-axis with hydraulic spindle brake 10-station BMT turret 10-station driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Rjdpfx Aboyxglkj Isbw Control: Mitsubishi M730UM controller with CELOS CELOS - ERGOline Touch Spindle: Main spindle (Spindle 1) standard Spindle options: Oil blower cooler for circulating coolant oil Chuck for main spindle: Main spindle (Spindle 1) 10" hollow chuck Ø254 mm Main spindle (Spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-station BMT60 turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock taper for live center MK 5 (live center not included) Coolant / Chip removal: Use of water-soluble coolant (emulsion) Hinged belt chip conveyor, discharge right (500,700) Coolant system with increased pressure, 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual tool presetter (swiveling, standard) Additional options: Customer voltage: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm • Max. turning diameter (X axis): 290 mm • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm Rbsdpfxjyxgi No Ab Iew • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 360 mm, controller model: Siemens 840 D PowerLine, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X- / Y- / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm X-axis travel: 150 mm Y-axis travel: 600 mm Spindle bearing diameter: 110 mm Turret Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Rbodpfsyxgc Nex Ab Iow Number of tool stations: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-compensation axes (+/-1°) Chip conveyor Parts catcher Tool breakage control Bar feeder: IRCO Profimat 65.6

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 4,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, number of axes: 5, This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details. • Control: Smooth G • Distance between spindles: 1000 + 440 mm • Max machining diameter: 500 mm • Spindle attachment: A2-6 Redsyxc N Eepfx Ab Ijbw • Max bar capacity: 65 mm • Spindle bore: 76 mm • Tool magazine: 36 Capto Additional equipment • Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 2020, functionality: fully functional, turning length: 1,200 mm, turning diameter over cross slide: 500 mm, spindle motor power: 40,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 87 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 12,000 rpm, swing diameter over cross slide: 500 mm, spindle nose: CAPTO C6, CELOS CNC WITH SIEMENS 840D AND MULTI-TOUCH SCREEN WORKING AREA: Rbedpfxoyxc Ars Ab Isw Turning diameter: mm 500 Max turning diameter: mm 500 Max turning length: mm 1,200 Distance between spindles (machine with sub-spindle): mm 1,470 MAIN SPINDLE: Spindle nose flange: mm 170 h5 Spindle bore: mm 87 Inner diameter of draw tube: mm 67 Front bearing diameter: mm 130 Power, S1-100% ED / S3-40% ED: kW 33/40 Speed range: rpm 4,000 Torque S1-100% ED / S3-40% ED: Nm 580/700 SUB-SPINDLE: Power, S1-100% ED / S3-40% ED: kW 25/32 Speed range: rpm 5,000 Torque S1-100% ED / S3-40% ED: Nm 280/360 SLIDE: X-axis travel: mm 490 (-10/+480) Y-axis travel: mm ±125 Z-axis travel: mm 1,200 Rapid traverse X, Y, Z: m/min 40/40/50 Feed force S6-40% X/Y/Z: kN 9/6/9 MILLING-TURNING SPINDLE: Tool interface: Capto C6 Max spindle speed: rpm 12,000 Power, S1-100% ED / S3-40% ED – 2 min: kW 19/22.5 Torque, S1-100% ED / S3-40% ED – 2 min: Nm 85/120 Spindle indexing resolution: degrees 0.001 Holding torque: Nm 850 B-AXIS CNC: Swivel range B1: ±120° Swivel speed: °/min 25,200 B-axis torque, S6-40% ED: Nm 614 Hydraulic clamping: Nm 2,800 MACHINE CONFIGURATION Control CELOS with Siemens 840D sl Operate ERGOline 21.5’’ with multi-touch screen Main Spindle Integrated motor spindle ISM 102 Drive: 33/40 kW (100/40% ED) Torque: 580/700 Nm (100/40% DC) Speed range: 0–4,000 rpm Semi-hollow hydraulic clamping device Inner draw tube Ø 104 x 800 mm depth C-axis and spindle brake (hydraulic) Sub-Spindle Integrated synchronous motor spindle ISM 76 Drive: 25/32 kW (100/40% ED) Torque: 280/360 Nm (100/40% DC) Speed range: 0–5,000 rpm Semi-hollow hydraulic clamping device, inner Ø 67 C-axis and spindle brake (hydraulic) Lower slide (Z3), servo-driven with ball screw drive, direct measuring system Coolant through spindle Spindle cleaning device Spindle Options Hydraulic hollow clamping device Ø 104 mm, pull force 105.5 kN at max pressure 45 bar, max speed 3,600 rpm Differential pressure for main spindle Differential pressure for sub-spindle Main Spindle Chuck 3-jaw hollow power chuck with through hole, BBD 315/122, manufacturer SMW-Autoblok Sub-Spindle Chuck 3-jaw chuck BBD 210–66, manufacturer SMW Autoblok Milling Spindle Milling spindle and tool magazine with Capto C6 interface Tailstock Tailstock function for sub-spindle including pedal Mechatronic programmable thrust control Thrust force: kN 2.5 – 6 Tool Magazine Chain-type tool magazine, 48 positions, Capto C6 interface Coolant / Chip Removal Hinged belt chip conveyor, including coolant tank High-pressure coolant system through milling spindle, consisting of: 980 L coolant tank with belt filter system 8 bar / 20 L/min Spindle cleaning device on main spindle and sub-spindle Mechanical fume extractor 1100 m³/h, filter class H13 Control Options (CELOS with Siemens) Technology cycle for alternating spindle speed to reduce vibrations Machine complete with: • Approx. 50 Capto C6 tool holders with related tools • No. 2 cabinets with inserts and various equipment • Instruction manuals and CE declaration of conformity

Condition: used, overall weight: 2,700 kg, MAZAK QUICK TURN 8 Serial number: 69867 Year of manufacture: 2010 Tool changer: 6 stations Rodpfx Absyxb His Isbw Control system: MAZATROL CAM T-2 Weight: approx. 2700 kg Chip conveyor: TSL BAKIMOTO D60W150ST-DN The scope of delivery includes: Workshop cabinet with machine accessories Indexable inserts Turning tools Tool holders Clamping jaws Selection of screws