Technical Solution LTD

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Machining Center – Horizontal (pallet design) Brand: KOLB | Year of manufacture: 1996 Total operating hours: approx. 100.000 h Condition: Fully functional (moderate repair work required before installation) The machine can be inspected by appointment. TECHNICAL DATA: - Position of main spindle: Horizontal - Design: Pallet - Clamping surface: 2.000 x 2.500 mm - Speed: 6.3 - 2.500 rpm - CNC control: SINUMERIK 840D sl - Table/pallet travel: 4.000 mm * Workpiece weight: max. 35 tons - Rotary table: * Table rotation via NC axis: 360° (degrees) * Additional indexing: 4 x 90° (degrees) * Working area: 4.000 mm * Workpiece weight: max. 35 tons Column/portal: * Column adjustment: 1.750 mm Drilling and milling slide: * Y-axis (milling slide travel): 3.000 mm * Z-axis (milling slide stroke): 1.000 mm, RAM: 1.250 mm - Rapid traverse V-axis (transverse movement of the carriage): 120.000 mm/min - Chip conveyor Detailed technical data sheet and information on equipment Bsdpfxoynb Svo Ahvscw available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: used, Norte VS1000 CNC milling machine Spindle speed: 6,000 rpm X-axis: 4,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm Tool holder: SK50 Control: Siemens 840 D Options: With chip conveyor With tool changer With documentation Bcodpfx Ajym Eblohvsw With tools

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Bcjdpfx Aeyk Uwqohvsw

Condition: excellent (used), Year of construction: 2006, Cincinnati MAG MEGA 5 (XT) HPC-800HP 5 Axis CNC Horizontal Machining Centre With Siemens 840D Control Bjdjydmnzepfx Ahvjcw Cincinnati MEGA 5-800 5 Axis Horizontal Machining Centre Utilises The Basic MEGA Twin Ball Screw-Driven Axes Configuration In 'X'=1,425mm - 'Y'=1,350mm & 'Z'=1,265mm, MEGA 'B'-Axis Table 360,000 Positions In 0.001˚ Increments, Compact 'A'-Axis Tilt Spindle With +60˚ to - 120˚. Max Component Dimension ⌀1,300mm x 2,000mm High. Work Surface Table Dimension Square 800mm x 800mm, Rectangular 800mm x 1,000mm (5 'T' Slots). Maximum Spindle Speed 15,000rpm. Maximum Table Load 2,200kg. Rapid Traverse 60m/min. Acceleration/Deceleration Rate Of 1G. Maximum Tool ⌀125mm (⌀300mm Non Adjacent), Maximum Tool Length 690mm, Maximum Tool Weight 30kg. S/No.MH00B01050001 (2006). With Renishaw Probe Interface, Siemens Electronic Handwheel, Barnes Chip Conveyor, ICS Chiller, Chip Blaster High Pressure Coolant System, Donaldson Torit Extraction Unit & Large Quantity Of HSK Tooling Included. Approx Overall Dimensions W6,400 x D5,000 x H2,800mm.

Condition: used, Year of construction: 2011, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 2,200 kg, controller manufacturer: Fanuc, table length: 800 mm, table width: 800 mm, controller model: i 31A, spindle nose: MAS BBT 50, table load: 2,200 kg, CNC Control MSX-701 lV (Fanuc i 31A) Pallet table size 800 x 800 mm Number of pallets 2x Table load 2200 kg Movement X-axis 1400 mm Bcodsydmifspfx Ahvjw Movement Y-axis 1200 mm Movement Z-axis 1350 mm Table indexing 0,001° Spindle Taper MAS BBT 50 Spindle Speed 10 -8.000 R/min Spindle motor 37/30 kW Magazin capacity 100 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), operating hours: 16,800 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, torque: 822 Nm, controller manufacturer: SIEMENS, controller model: 840D, workpiece length (max.): 1,890 mm, workpiece width (max.): 1,450 mm, table width: 800 mm, table length: 1,000 mm, rotational speed (max.): 6,000 rpm, spindle motor power: 43,000 W, spindle nose: ISO 50 DIN 69871, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MODEL MCH 450 C DOUBLE PALLET 5-AXIS CNC Control: SIEMENS 840D WORKING AREA: X-axis travel (longitudinal): 1600 mm Y-axis travel (vertical): 1200 mm Z-axis travel (transversal): 1700 mm LINEAR GUIDES: Size 55 DRIVE SYSTEM: Diameter x Pitch: 50x25 mm FEED FORCE: X axis (S3-40%): 15,000 N Bedpfx Ahjydfcdevjcw Y axis (S3-40%): 15,000 N Z axis (S3-40%): 17,500 N FEED RATE: Working feed rate (X, Y, Z axes): 1 - 40,000 mm/min Rapid traverse (X, Y, Z axes): 40,000 mm/min Acceleration (X, Y, Z axes): 4.0 m/s² SPINDLE: Front bearing diameter: 100 mm Spindle taper: ISO 50 DIN 69871 Spindle motor power (S1-100% / S6-40%): 28/43 kW from 500 rpm Max torque (S1-100% / S6-40%): 536/822 Nm up to 500 rpm Spindle speed: 45 – 6,000 rpm Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 10 ROTARY TABLE: Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 6 Max clamping weight on pallet: 2,500 daN Max tangential moment: 40,000 Nm Max tilting moment: 34,000 Nm Rotation time 45°: 2.9 s Rotation time 90°: 3.5 s Rotation time 180°: 4.6 s PALLET CHANGER: Coupling surface as per DIN 55201 A1 Pallet dimensions: 800 x 1000 mm Workpiece dimensions: - Positioning diameter in working area x height: 1890 x 1450 mm Pallet change accuracy (X, Y, Z axes): 0.02 mm Pallet change time: 27 s X/Y/Z AXIS POSITIONING ACCURACY: Direct measurement with optical scales Positioning tolerance as per VDI/DGQ 3441: 0.010 mm COOLING UNIT WITH ROTARY VACUUM FILTER – HIGH PRESSURE 70 BAR: Coolant tank capacity: 2,500 l Coolant pump 4 bar, flow rate: 230 l/min Coolant pump 4 bar, flow rate: 70 l/min High-pressure pump 50 bar, flow rate: 28 l/min TOOL CHAIN MAGAZINE WZM 100: Tool magazine positions: 100 Max tool length (from spindle nose): 600 mm Max tool diameter (with adjacent tools): 112 mm Max tool diameter (without adjacent tools): 228 mm EQUIPPED WITH: - Chip conveyor (modified for handling very long chips) - Tool breakage detection - Handwheel (for axis control and movement within the working area) - Tool change in masked time (tools can be loaded/unloaded from magazine automatically without stopping the machine program) USED MACHINE YEAR 2007

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, overall weight: 36,000 kg, controller model: M-Plus, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. Bjdjyddfdepfx Ahvscw CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Additional equipment • Additional Documentation: User manual available Machine Benefits Technical Machine Benefits Bsdpjyar A Aefx Ahvjcw • Feed rates: standard: 1 to 5000 mm/min / rapid traverse (y and z axes): 10 m/min/ feed rate: 12 m/min • Worktable: size: 1000 x 3000 mm / maximum workpiece weight: 7000 kg / number of t-slots: 7 / distance between t-slots: 140 mm / t-slot width: 22 mm / table height from the base (floor): 900 mm • Spindle: spindle taper: iso 50 / spindle diameter at the front bearing: 85 mm / minimum spindle distance from the worktable: 125 mm / maximum spindle distance from the worktable: 1775 mm / spindle speed: 16 to 3500 rpm (stepless)

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Bcodpfx Ajyan Rcehvsw Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Bsdpoyair Uefx Ahvscw Machine still under power Dimensions Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, total height: 500 mm, overall weight: 7,500 kg, product length (max.): 1,200 mm, This 3-axis ZEUS FMO 140B was manufactured in 2000. It features a dual-spindle system with both horizontal and vertical capabilities, and a maximum speed of 4000 rpm. The machine includes a Selca 4045 CNC, a recently replaced handwheel, and a network board. Axis travels are 1200 × 650 × 500 mm. Consider the opportunity to buy this ZEUS FMO 140B horizontal machining centre. Contact us for more information about this machine. • Dual-spindle system (horizontal and vertical) with gear range change • Maximum spindle speed: 4000 rpm Bcjdox Uz E Dopfx Ahvow Dimensions Machine Depth 650 mm

Condition: used, Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: Fanuc, overall weight: 75,000 kg, table length: 1,000 mm, table width: 1,000 mm, controller model: 160i-M, table load: 2,000 kg, CNC Precision Horizontal 5-axis Machining Centre CNC Control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Bcodpfxex Ttx To Ahvew Number of pallets 5 Max. workpiece diameter x height 1400x1200 mm Movement X-Y-Z-Axis: 1800 mm A-Axis (table tilt) +20 / -110 B-Axis travel 360° Spindle taper DIN 69871/50A Spindle speed 10.000 R/Min Tool store capacity 240 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2022, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, overall weight: 2,087 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used HAAS TL-2 horizontal machining center, year of manufacture 2022. Serial number: 3124664 Manufacture date: 06/2022 Voltage: 400 V Phases: 3 Frequency: 50/60 Hz Rated current: 13 A Bsdsx Tgx Hspfx Ahvjcw Maximum current: 10 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2010, operating hours: 32,241 h, functionality: fully functional, CNC Machining Center HECKERT HEC 1250 Athletic Ram For sale is a used CNC machining center HECKERT HEC 1250 Athletic Ram with ram support. The machine is in operational condition and suitable for heavy-duty machining tasks in industrial applications. Machine Data Machinery Type: CNC machining center with ram support Model: HEC 1250 Athletic Ram Machine Category: Milling machine / machining Year of Manufacture: 2009 Condition: Functioning Operating Hours: 50,100 h Control System: CNC control, Siemens Solutionline 840D Number of Axes: 5 Software: Siemens Sinumerik Mechanics / Spindle Toolholder: DIN 69871 SK50 Spindle Type: SK50 Maximum Tool Weight: 35 kg Maximum Tool Length: 450 mm Maximum Tool Diameter: 250 mm Tool Magazine: 280 positions Probe: Renishaw MP10 Travel Paths X Travel: 2,200 mm Y Travel: 1,500 mm Z Travel: 1,850 mm Pallet System Pallet Pool: 2 pallets Additional Pallets: 4 pallets with threaded holes and T-slots Pallet Size: 1,000 × 1,250 mm Bodpfx Ahex Syhrovecw Equipment Oil Tray: Available Platform: Available Coolant System: Available Chip Extractor: Available Operating Manual / Documentation: Available Crane: Available Maintenance / History Maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Inspections: 2021, 2022, 2023 Last Major Overhaul: ZP-KGT replacement in 2025 Power Supply Mains Connection: TN-C, 3/PEN AC 400 V Rated Voltage: 3AC 400 V Rated Operating Voltage: AC 360 V – AC 440 V Operating Frequency: 49 – 51 Hz Insulation Voltage: AC 500 V Rated Current: 250 A Supply Fuse: NH fuse size 1, 250 A gL, 500 V Connected Load: 130 kW Type of Current: D Compressed Air Connection: 6 bar Transport / Dismantling Machine must be dismantled: Yes Tools for Dismantling / Removal: Not included

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT Bcsdpfox Sqptex Ahvjw 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Bcodpfox N Atfsx Ahvow

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area Bcsdpfx Ahox Iputevew -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: excellent (used), Year of construction: 2018, operating hours: 12,805 h, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Siemens, controller model: 840D SL, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, total height: 3,700 mm, total length: 6,700 mm, total width: 3,000 mm, table width: 1,500 mm, table length: 2,000 mm, table load: 500 kg, overall weight: 8,000 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 4,314 h, spindle motor power: 16 W, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a high-precision 5/6-axis CNC machining center, MAKA MK 7s, from MAKA Systems GmbH, equipped with Siemens SINUMERIK 840D SL control and OP15 PCU operating unit. The machine comes directly from production, is powered up, and can be inspected or demonstrated in operation at any time. It is in very well-maintained technical condition and has been serviced regularly. TECHNICAL HIGHLIGHTS: - 5-axis milling technology with retrofitted 6th axis (B-axis / Lehmann rotoFIX EA-530) - Spindle completely overhauled (2025, €18,000 investment) - Tool magazine with 20 positions (rotary table) - Tool holder: HSK A63, max. speed 24,000 rpm, output 16 kW - Rapid traverse: X/Y = 60 m/min, Z = 45 m/min - Positioning accuracy per axis: ± 0.1 mm/m, repeat accuracy: ± 0.05 mm/m - 3D wireless measuring probe, tool breakage detection, spray cooling unit - Rectangular frame table with zero-point clamping system and chip management (brushes, guide plates, conveyor belt) - Pneumatic/hydraulic workpiece clamping incl. hydraulic unit - Hydraulic system up to 210 bar (3 clamping circuits) - CAD data, technical documentation, and layout plan available WORKING RANGE & DIMENSIONS: - Travel (X/Y/Z): 2,900 / 1,900 / 1,000 mm - A-axis: 196° C-axis: 540° - B-axis (Lehmann rotary table): retrofitted, integrated with the control system - Working area: 2,000 × 1,000 × 600 mm - Machine weight: approx. 8 t - Dimensions (L × W × H): approx. 6.7 × 3.0 × 3.7 m FURTHER EQUIPMENT: - Saw blade pick-up station (Ø 450 mm) - Reinforced front doors, sheet metal safety enclosure with noise-reducing roof - Automatic safety sliding doors - Blowing nozzle in tool magazine (spindle cleaning) - Electrical connection: 400 V / 50 Hz – 19 kW – 43 A - Pneumatic connection: 6 bar / ½″ – air consumption approx. 800 l/h OPERATING HOURS / RUN TIMES: - Main power-on hours approx. 12,805 h (as of Oct 2025) The meter runs whenever the machine is powered—during setup, maintenance, or idle time as well. - Spindle run time: 4,314 h total The current spindle was fully renewed and overhauled in 2025 SPECIAL FEATURES: - Powered up – demonstration available at any time - Direct from production – not a dealer sale Bcodox Hv I Djpfx Ahvsw - Complete technical documentation available - Support with dismantling, loading, and transport available (for a fee) Price: €174,900 net – optionally incl. 6th axis (Lehmann) €199,000 Price is net, negotiable with quick turnaround. All details have been provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Bcsdpfxex Hn A To Ahvew Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: SN 15642, Hüller Hille nbh110 Bcedpox Ey Ifjfx Ahvsw SN 15642 Year of manufacture: 1999 Spindle: SK40, 12,000 rpm X-axis: 630 mm Y-axis: 630 mm Z-axis: 600 mm Max. feed rate: 7,500 mm/min Tools: 36 pcs Tool diameter: 150/340 mm (with free adjacent positions), Tool length: 270 mm Number of pallets: 4 Pallet size: 400x500 mm Max. pallet load: 600 kg Axis B NC NC control: Sinumerik 840D Power: 69 kVA

Condition: used, Year of construction: 1986, Machine: Hueller Hille NBH 70 Serial number: 6161034.1 Year of manufacture: 1985 Control: Sinumerik 810 Spindle speed: 25-6000 rpm Tool holder: SK40 Travel: X: 630 Y: 500 Z: 550 Bodpfxjx Ey Acs Ahvjcw Optical measuring system in axes X, Y, Z B axis rotatable in 1° increments 2 pallet tables, surface: 400x400 mm Pallet changer system Tool magazines: 2x with 24 tools each Max tool diameter: 110 mm Max tool length: 320 mm Max tool weight: 15 kg.

Condition: used, Year of construction: 1986, Machine: Hueller Hille NBH 70 Serial number: 6171067 Year of manufacture: 1986 Control: Sinumerik System 8 Spindle speed: 25-4000 rpm Tool holder: SK40 Travel X: 630 mm, Y: 500 mm, Z: 550 mm Optical measuring system in X, Y, Z axes B axis NC mode 2 pallets, table area: 400x400 mm Pallet changer system Bjdpfxsx Eyzfe Ahvecw Tool magazine: 2x with 24 tools each Max tool diameter: 110 mm Max tool length: 320 mm Max tool weight: 15 kg Power supply: 380V 50Hz 36kVA.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: SIEMENS, controller model: 840 D, spindle motor power: 37,000 W, number of axes: 4, This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Bcsdpfx Asx D Rn Rohvow Additional equipment • Machine includes a Kirchgässner pallet storage. • Magazine Capacity: 32 Euro pallet spaces for raw material • Pallet Size: 630x800 mm • Pallet Spaces: 32 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, total height: 2,700 mm, table load: 3,000 kg, overall weight: 17,600 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 11,000 W, number of axes: 5, This 5-axis OMV BPF-4 1200 universal machining centre was manufactured in 1999. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this OMV BPF-4 1200 universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits Bjdsx D R Hyjpfx Ahvocw • Table length: 2300 mm // table width: 930 mm • T grooves: 7 • Width t-slots: 18 mm • Groove spacing: 120 mm • Working feed: 0 to 12000 mm/min fast feed: 12000 mm/min • Table distances: floor: 780 mm vertical spindle nose: 325 to 925 mm spindle nose horizontal: 410 to 1010 mm • Type: electric spindle iso 40 • Din: 69871 / compressed air: 6 bar • Vertical inclination: +170 degrees // horizontal inclination: +120 degrees • The bed has a weight of approx. 14000 kg Extra Information 360 degree swivel tableTable diameter 1000 mm, locked! The head can be moved in any direction and stopped at any position. Simultaneous movement is possible on the X, Y, Z, A and B axes, but not on the rotary table! Dimensions Machine Depth 4550 mm

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm Bedpfxex D Eppe Ahvjcw X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling