Varaka Kağit Sanayi̇ A.ş.

Condition: ready for operation (used), Year of construction: 1991, A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible. Fodpfx Aezrhhkjkvjgf

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Fodpfx Aoy Ufkqekvsgf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts. Fgsdpfxsy Ufgxo Akvjf

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Fgjdpfsy Ufgrex Akvef Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Fgodpfx Akex Ez Umjvjf Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: ready for operation (used), A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January. Fedpfx Asxwyvwekvogf

Condition: ready for operation (used), Year of construction: 2002, A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Fsdpfx Asxa Eizokvegf

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Specification: Wrapping material: parchment, cooking paper Paper thickness: 10 - 70 g/m2 Fedpfsv Dutujx Akvsgf Speed: 500 rolls of 15 m / hour Working width: 200 mm - 420 mm Main roll of maximum diameter: 1000 mm The maximum diameter of the finished roll: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Fsdpfxsvripyj Akvegf

Condition: like new (used), Year of construction: 2015, functionality: fully functional, mandrel diameter: 76 mm, product width (max.): 1,600 mm, Eruomac rewinder / slitter TB 6.10M Year of construction 2015 Unwinding Roll width 1600 mm Roll diameter 400 - 1200 mm Equipped with web edge control Rewind Fedpfx Astyxu Eskvsgf Roll width 1600 mm Roll diameter 350 - 1000 mm

Year of construction: 2012, condition: like new (used), We have a Buhrs 1000 poly wrapping system available. Year 2013. You could modify this system to paper wrapping if you like. This machine is later on completed with a extra base and two extra rotary feeders SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1000 Poly Wrapping System (max.13.000 c/h) Year: 2013 CONFIGURATION 1 Buhrs 1000 main product feeder, type shuttle feeder 1 Buhrs 1000 master base station 4 Buhrs 1000 rotary feeder Fgsdjhid Adopfx Akvef 1 Buhrs 1000 module for filmpackaging with double action sealbar, max 13.000

Condition: excellent (used), We have a BECK HV600 shrinktunnel available. This machine is ready after complete maintenance and is working like new! The measurements are in the pictures. Fsdpfx Akjhcdhlevjgf