B+B Bau- und Möbeltischlerei GmbH

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - User-friendly controls - Ideal working height - Large opening - Full access from all four sides - Push-button control - Stop button - Safety cable - EMERGENCY STOP at every location - Timer with acoustic signal - Pressure switch automation - Automatic temperature control system - Infinitely adjustable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons - Plate dimensions: 3000x1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permissible operating temperature: 140 °C - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500x1610x2000 mm Itedpfjy R Haxex Aktjg - Total weight: 6200 kg Availability: short notice Location: 63934 Röllbach

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg Itodpey Rq Efefx Aktjg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Operating pressure max.: 320 bar Pressure cylinders: 8 x 90 St/DM mm Opening width: 400 mm Weight approx. 8300 kg Itsdey Hrzmjpfx Aktjg Dimensions: 4130 x 1520 x 2150 mm Functionally tested = new top plates (gold anodized) Location: Nattheim

Condition: ready for operation (used), Year of construction: 2003, Corpus press manufactured in 2003. This PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1300 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details. • Workpiece dimensions • Cabinet height: 300–2500 mm • Cabinet width: 300–1300 mm (smaller widths possible manually with fillers) • Cabinet depth: 160–700 mm • Max side thickness: 56 mm (including fittings) • Operational requirements • Power supply: 400 V ±10%, 50 Hz, 3-phase, approx. 10 kW • Compressed air: 6–7 bar, oil-free and dry • Space/ergonomics: Minimum room height 3700 mm; working height 930 mm • Visual configuration (RAL colors) • Machine and control cabinet: RAL 7032 Kieselgrau • Supports and safety guards: RAL 3000 Feuerrot • Motors and extraction hoods: RAL 9005 Mattschwarz Additional equipment • Buffer system • Roller conveyors (Roba) • Roba_11: ~2800 mm length, 700 mm usable width; split round-belt drive; two 0.55 kW motors; 60 m/min; 1 fixed end stop + 1 controllable center stop • Roba_12: ~2800 mm length, 700 mm usable width; 0.55 kW motor; 60 m/min; primary operator controls (Start/Stop, Emergency Stop) • Rollers: Ø60 mm, plastic-coated; pitch 128 mm • Working height: 930 mm (±20 mm) • Cross conveyors (QF) • QF_11 and QF_12: 8 toothed belts; 0.55 kW motors with frequency inverters • Speed: 40 m/min at 50 Hz • Operation: Pneumatically tiltable (hoch schwenkbar) • Total transverse width: ~1720 mm • ZWA-1-CNC unit • Workpiece dimensions: cabinet height 300–2500 mm; width 300–1200 mm; depth 160–700 mm • Operational: Electrical and compressed air supplied via downstream carcass press • Working height: 930 mm • Space: Minimum room height 3700 mm • Construction: Solid, torsion-resistant frame with precision guides for lifting table Ijdpfxjyvhlms Aktjtg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Itedpfjyuxh Iox Aktog Destacker High-frequency cabinet (offered separately)

Condition: used, Year of construction: 1999, machine/vehicle number: H 40, functionality: fully functional, total length: 2,200 mm, total width: 1,100 mm, total height: 1,800 mm, temperature: 120 °C, Veneer press 2200 x 1100 mm with heating, press pressure via hand pump. Itjdpfx Asyuva Ujktjg

Condition: ready for operation (used), Veneer press with 30 floors Size of press plates 3000 x 1650 mm Itedsyh A E Uopfx Aktjg Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: like new (used), shelf length: 3500 mm shelf width: 1300 mm shelves made of stainless steel pistons and seals replaced number of pistons: 10 piston diameter: 85 mm Isdjyfr T Espfx Aktjtg water heating weight: 6100 kg

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm Isdpfx Akoyalmbststg • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Ijdpfx Aex U Tv Ioktjtg Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm number of pistons: 6 year of manufacture: 2004 water heating weight: 3900 kg 400 V gap clearance: 400 mm CE marking Iedpfx Ajx Thnijktotg

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Itjdpfxsx D E Ave Akteg Application Types Pressing / Laminating

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Ijdpjxfg A Hefx Aktstg Weight: 3,700 kg

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm Itsdpfx Akjxcn Dtetog hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Itsdpfxowpm I Hs Aktog Location: Röllbach

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, You can view the machine under power until mid-July 2025. For sale is an almost as-new veneer press with infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of construction 1992). The machine is in excellent condition and has only low usage hours. Machine type: Throughfeed press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of construction: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Loading: yes Infeed belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Passage height: approx. 100 mm Feed temperature: 200° Thermal output: 45 kW Heating medium: oil Press force: 200 tons The press machine is in top condition, has had very low usage, and has been used exclusively for development projects for the past 15 years. I will gladly send you further information and pictures on request. The machine is immediately available and can be viewed by arrangement at any time. Itedpfx Akownpcdsteg Pick-up only! Function video on request. If interested, I am happy to provide further information or arrange a viewing!

Condition: used, Year of construction: 1991, Colour: Grey High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Details: - └ Description: Exclusive High-frequency cabinet - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpfx Aowng Tmektetg Yorick Diebels

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4 Itjdpewmmrajfx Aktjg