Engine Systems Technologies BV

Condition: new, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 29689491504001, With ignition, complete The system consists of a high-performance wood gas engine coupled with a generator for efficient power generation. The unit is designed for stationary use and is ideal for industrial applications, combined heat and power (CHP) plants, or emergency power supply. Dwjdpoxxk Tpsfx Ab Tof MAN inline 6-cylinder engine with generator: - Robust construction for continuous operation - Optimized combustion for natural gas or biogas Directly coupled to the engine - High efficiency for maximum energy yield - Designed for three-phase power generation Electronic ignition for precise control - High reliability even under demanding conditions Power: according to data sheet Voltage: 400 V, 50 Hz Control system: Integrated engine and generator control High efficiency and long service life Maintenance-friendly design Adaptable for various gas types Condition: The item was briefly installed but never commissioned. Therefore, it is new and fully functional.

Condition: new, operating hours: 1 h, functionality: fully functional, machine/vehicle number: s.n, 7B0106, arrangment 102-9407 352KW Dodpjxv Er Iefx Ab Tewf 1500 rpm NUOVO MAI USATO completo di attuatore

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862 Dwsdpfx Aboxcudas Tjf  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: used, Year of construction: 2002, operating hours: 69,000 h, functionality: limited functionality, power: 625 kW (849.76 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, input frequency: 50 Hz, load hours: 69,000 h, The engine with generator was removed from an existing container. Only the engine with generator and the corresponding control cabinet are for sale. All maintenance was regularly performed by Jenbacher service technicians, as we had a maintenance contract. The last major service was carried out at 50,000 operating hours, during which the turbine was also replaced. It is in good condition and stored in a warehouse. Dsdpfxjw Dn Sps Ab Tswf

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2024, We offer a choice of natural gas or biogas engines from the manufacturer Liebherr. Type G9512 Standard scope of delivery -starter -Cylinder heads -Exhaust manifolds and elbows -Turbocharger -Intercooler -Control valve (without actuator) -without gas mixer -without engine control and ignition system -without charge air line The engines are equipped with the following sensors: -single cylinder temperature monitoring -engine oil temperature sensor -engine oil pressure sensor -RPM sensor (2 pieces) Dwodpfx Abjtpw Eco Tsf -ignition signal transmitter -Mixture temperature sensor -mixture pressure sensor -Coolant temperature sensor -coolant pressure sensor

Condition: new, Year of construction: 2024, functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm - Engine length: 1,748mm - Engine height: 1,500mm - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS • Standard MAN factory approval with natural gas “H” Dwedpfotpw Dfjx Ab Tjf • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor

Condition: as good as new (ex-display), Sold are pistons complete for Scania DC13 gas. These are original components from Scania. The pistons were removed from new engines. Included are: Piston Piston pin Circlips Dsdpfx Aboivzv Ij Tjwf Piston ring set The piston set is ready to use. Price per piece: 550,00€ net VB There are a total of 540 pieces available Europe-wide shipping is possible against payment of costs. Sale exclusively to traders under the express exclusion of warranty and liability for material defects.