Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG

Condition: used, Year of construction: 2016, functionality: fully functional, total width: 2,134 mm, total length: 2,134 mm, total height: 4,000 mm, empty load weight: 550 kg, tank capacity: 15,000 l, Equipment: documentation/manual, Original lye tank. Now 100% cleaned by a professional company. Cleaning certificate available. The tank is double-walled. Inner tank capacity: 7.6 m³, outer tank capacity: 7.7 m³. Suitable as a water tank or for use in the food or chemical industry. The tank includes level indicators for monitoring minimum and maximum liquid quantities. This is a highly chemical-resistant tank for storage, dilution, and mixing of caustic substances and acids. Manufactured from PE100 material. Year of manufacture: 2016, used until 2023. For additional details, see the equipment nameplate in the photos. Included is a dosing device with controls for suctioning liquids into the tank, as well as a control panel for liquid mixing. The equipment is owned by KORES Europe. Csdpfx Aextngijb Tjrk

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Codpfx Aexn Aagob Tsrk

Condition: ready for operation (used), Year of construction: 2011, Powder feeding cabinet with suction hood and potentially a dust filter, twin screw powder feeder is installed under the cabinet with a level sensor. Crjdpfxsw Dfv Se Ab Tek

Condition: new, 4 never used dosing stations. Cedpfx Aowvmiwob Terk

Condition: ready for operation (used), The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Crjdpfxownr Tre Ab Tsk

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,000 h, functionality: fully functional, total width: 4,000 mm, total length: 4,000 mm, total height: 4,000 mm, empty load weight: 1,500 kg, compressed air connection: 6 bar, Crushed styrofoam from the shredder (a part of the machine) or styrofoam in pellet form as raw material is transported to the silo above the machine. From the silo, the styrofoam passes through a section of the machine where it is sprayed with an additive and then dosed into bags for packaging. Csdpfx Abev A Squj Tjrk The additive tank contains agitators and heaters, and the additive is pumped from it up to the sprayers in the upper part of the machine. The machine, in addition to automatic and manual dosing options, also features a liter counter for additive consumption and a counter for filled bags.

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Crsdpfsvpfhyex Ab Tsk Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: used, Technical details: circulating medium: Druckluft dimensions L x W x H: 0,9 x 1,3 x 1,9 m Plastic granulate dosing sheet steel construction with angular steel base external operation Crsdpfx Asu Nu Sfsb Tsk supply tank: -Size L: 1250 x W: 670 x H: 680mm -content approx. 400Liter -granulate supply connection 1x blind plug and 1x pipe 300/400MM; filling via 2x connection inch over ceiling -operation discharge: regulation by connection of abrasive dosing valve (1x open+1x closed) and compressed air connection 1 1/2" x 450mm Dosing tank: -2 tank size Ø 300 x 560mm -outlet 1x1 1/4" and 1x1 " -equipment 1x level measuring unit each -air connection 2" -Water separator model F602G10WJ/N, pressure max. 17 bar / 250 PSI; temperature max. 65°C / 150°F *

Condition: excellent (used), functionality: fully functional, total width: 1,500 mm, total length: 3,000 mm, total height: 2,850 mm, Chemical supply station Lotus Used goods, good condition, see pictures Including control unit Length 300 cm Width 150 cm Height 285 cm Power 0.5 kVA Year of construction 10/2007 Credpfstwy I Iox Ab Tjk Already dismantled 3 pieces available Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: used, Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Condition: Used Cedpfoiv Ic Ejx Ab Terk Price: On demand