New England LLP

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300 CX, year 2010 The machine is equipped with: - Handling system from manufacturer Wittmann - 3 temperature control units (with water) - Conveyor belt - And the machine itself Ksdjxqd Nzspfx Afionc

Condition: good (used), Year of construction: 2005, Clamping force: 110 t Screw diameter: 35 mm Knodpjxqd Nbsfx Afisc Shot weight: 100 g Distance between tie bars V: 680 mm Distance between tie bars H: 740 mm Type: Horizontal Drive: Hydraulic Working hours : 431000 h

Condition: used, Year of construction: 2004, Engel Victory 500/110 Power (2004) Working hours : 536.000 h Clamping force: 110 t Ksdpfx Afsxqd Ikoionc Screw diameter : 25 mm Distance between tie bars : 740 x 680 mm Shot weight : 60 g

Condition: used, Year of construction: 2000, Engel ES 330/110HL-V (2000) Working hours : 257.000 h Clamping force: 110 t Screw diameter : 35 mm Distance between tie bars : 730 x 420 mm Knjdpexqd D Eefx Afisc Shot weight : 75 g Size of mould platen: approx. 730 × 600 mm (H × V) Minimum mould height: 250 mm Maximum daylight opening: 750 mm Opening stroke: 500 mm Machine weight: 5900 kg

Condition: good (used), Year of construction: 2002, Arburg 420 C 1000-250 (2002) Working hours : 115600 h Clamping force: 100 t Screw diameter : 30 mm Kjdoxqczpjpfx Afijnc Distance between tie bars : 420 x 420 Shot weight : 100 g Machine weight : 3580 kg

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Kodpfxexqcrzs Afisnc Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Condition: like new (used), Year of construction: 2015, Engel E-Victory 170H/50V/120 combi (2015) Clamping force: 1200 kN Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 21.361 kW Screw diameter: 25 mm Kedpfx Ajxqb Sajfionc Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Machine with robot viper 20 and conveyor Working hours : 41427 h

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Ksdpfxexp Sq De Afienc Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Additional Equipment Injection unit: 13000 kg Knjdsxpyuwjpfx Afiec Clamping unit: 9000 kg only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Knedpfx Afexpuvceijc Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, Engel Victory 330/110 Tech General Data Year of manufacture: 2004 Control system: CC200 Itsw Aew Rc A Is Nkftsn Weight: 7,400 kg Dimensions (L × W × H): 5.2 × 1.6 × 2.2 m Injection Unit Kedjxpuhropfx Afisnc Injection unit: 330/... Screw diameter: 30 mm Specific injection pressure: 2178 bar Injection volume: 113 ccm Shot weight: 103 g Clamping Unit Mould clamping unit: 110/... Clamping force: 110 t Platen dimensions: 680 × 740 mm Tie bar spacing: tie-barless mm (no exact value provided) Opening stroke: 500 mm Ejector System Ejector force: 40 kN Ejector stroke: 130 mm

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Description SGM Operating hours Cycle counter Knedpfoxpufdjx Afisc Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Knjdpfx Afexpudmjiec Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: used, Year of construction: 2010, Arburg Allrounder 470 H 1000-170, year of manufacture 2010 Clamping force: 1000 kN Screw diameter: 30 mm Ksdpfexpublex Afienc Screw length: 930 mm Shot weight: 77 g With Arburg robot

Condition: used, Year of construction: 2017, Arburg 470S 1100-290, year 2017, 2-component machine. The machine has been idle for some time without a contract. It is from 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1100kN; the lower unit is equipped with a 290 injection unit with a 35mm screw, while the upper unit has a 100 injection unit with a 30mm screw. Up to now, only ABS and TPE materials have been processed. The machine is equipped with an integrated hot runner system and three core pulls, as well as additional options. Included in the scope of delivery is a Kuka handling robot, which is operated via the machine’s Selogica control system, along with the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Kodpfx Ajxpuanefisnc

Condition: excellent (used), Year of construction: 2006, operating hours: 45,200 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM200-700C2 Baujahr: 2006 Schließkraft: 200 Tonnen Holmabstand 560 x 560 mm Schnecken DN: 45 mm Knodpfxoxpnpio Afioc Max. Hubvolumen: 305 cm³ Spritzteilgewicht: 278 g/PS Steuerung: MC5 Ausstattung: Roboter GHS Baujahr: 2004 Verschleißarme Plastifizierung 1 St. Kernzug 1 St. Förderband Sicherheitszaun Ca. 45.300 Betriebsstunden

Condition: excellent (used), Year of construction: 2010, operating hours: 43,000 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM160-750CX Baujahr: 2010 Schließkraft: 160 Tonnen Holmabstand 520 x 520 mm Schnecken DN: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht: 228 g/PS Steuerung: MC5 Ausstattung: Roboter, Hersteller: GHS, Baujahr: 2012 Schnittstelle Temperiergerät Verschleißarme Plastifizierung Knodpfx Afjxpnkajisc 2 St. Kernzug 1 St. Förderband Sicherheitszaun

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine elektrisch mit Angußpicker Hersteller: FERROMATIK Typ: EE50-55 ELEKTRA 50 evolution Baujahr: 2012 Schließkraft: 50 Tonnen Holmabstand 320 x 320 mm Schnecken DN: 22 mm Knodpjxpnc Aefx Afisc Dosiervolumen: 29 ccm³ Spritzteilgewicht 26 g/PS Steuerung: MOSAIC Ausstattung: -1 x Kernzug -Angußpicker, Hersteller: WITTMANN, Typ: W702, Baujahr: 2012

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Kjdpfjxpkqisx Afijnc Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2008, General Data Knjdpsxpknhefx Afisc Machine weight 8200 Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 40 mm Clamping Unit Knedpfx Aoxpknbefioc Clamping force 1600 kN Additional Equipment Robot Demag DR711 available at extra charge. This DEMAG Systec 130/475-430 was manufactured in 2011. It features a clamping force of 1600 kN and tie bar spacing of 475x475 mm. The screw diameter is 40 mm, and it includes both pneumatic and hydraulic valves. An additional robot, Demag DR711, is available at an extra charge. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Systec 130/475-430 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Kodpfexpkmdex Afijnc Distance between bars 800x710 mm Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Condition: used, Year of construction: 1994, Used injection moulding machine from Engel Knodpexphz Esfx Afisc Type: ES 500 100 HL Clamping force: 100 tons Max opening stroke: 500 mm Hydraulic return stroke: 130 mm Max mould height: 250 mm Installation height: 750 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Kjdpfoxn N H Tox Afionc Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: excellent (used), Year of construction: 2016, operating hours: 35,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 700 cm³, injection weight: 600 g, For sale: Injection moulding machine by Engel, model Victory 1050/300 The machine is in very good condition, fully functional, and available at the end of 2025. Technical specifications: Year of manufacture: 2016 Operating hours: approx. 35,000 Clamping force: 300 t Screw diameter: 60 mm Shot volume (theoretical): 608–763 cm³ Shot weight: approx. 550–687 g Max. injection pressure: approx. 1,725 bar Platen size: approx. 1,100 x 1,100 mm Length: approx. 7.3 m Weight: approx. 19.8 t Equipment: - 1x hydraulic core pull - 12x electrical heating circuits - 4x Kistler mold cavity pressure sensors - 4x programmable I/Os - 8x temperature monitoring units - Needle shut-off nozzle - Host computer interface - Reject chute interface - 1x blow air valve A robot system was installed by the previous owner; this is not included. Photos available upon request. Kodpfxsxn Npzo Afisnc Transport and loading within Europe can be organized at an extra cost upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange welcome! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.