Dumper

Volvo A40G dump truck 6x6. WATCH VIDEO

Condition: used, Year of construction: 2024, operating hours: 825 h, CE mark: yes Serial number: 35xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20539 Specifications: - 2024 model - 1500 hours - 30700 kg. - 347kW - Volvo co-pilot - Articulated steering - 6x6 - Locking - Good tires - Central lubrication - Weight - Webasto Ksdpfx Aewph Ihsg Ajdw - Air conditioning/ac - Radio - Heated mirrors - Lights - Ready for delivery Description: Vi har en 2024 Volvo A40G Dumper 6x6 for salg. Dumperen har lite timer og fungere som den skal. Den går på serviceavtale hos Volvo. Sist service var 30.10. Dumperen tar seg godt fram i terrenget og er meget effektiv.  Leveringsklar Hours: 825 Own weight: 30700 Kw: 347 CE: Yes Model: A40G

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request Kdodpfsuu Hgdex Ag Asw For further information, please contact Stefan Schaapveld.

Condition: used, Year of construction: 2024, operating hours: 39 h, Internal vehicle number: VTC10037 German vehicle Located at our yard in Kaufungen - Kassel, available immediately Kedpowvyhgefx Ag Aodw For more information contact * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The excavator is brand new and has never been in operation! Demo version! Weight: 18.4 tons MB-Boom Transport length: 7.64 m Transport width: 2.54 m Transport height: 3.15 m Maximum reach: 7.98 m Digging depth: 4.61 m Breakout force: 108.5 kN Travel speed: 35 km/h EW model series Engine manufacturer: Volvo Engine type: D 4 J Engine output: 102 kW Displacement: 4.04 l Speed at maximum torque: 2000 rpm Maximum torque: 605/1500 Nm Number of cylinders: 4 Bore x stroke: 101 x 126 mm Emission stage V ENCONG EC319-S60 tiltrotator Errors excepted We are happy to accept your used vehicle in part exchange. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), mileage: 20,226 km, power: 316 kW (429.64 HP), first registration: 12/2021, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: air conditioning, = Additional Options and Equipment = - Heated mirrors - Power brake booster - Electric windows - Electronic Braking System (EBS) Kdedpfew H N Absx Ag Asw - Speed limiter - Cab - Side skirts - Sun visor - PTO (Power Take-Off) - PTO (Power Take-Off) = Further Information = Technical Information AdBlue system: Yes Front axle: Steered; Tire tread left: 80% Rear axle: Tire tread left: 80%; Suspension: Air suspension Weights Unladen weight: 10,350 kg Payload: 7,650 kg Gross vehicle weight: 18,000 kg Functionality Pump: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further information Contact John de Koning or Mark de Koning for more information.

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/2015, loading space length: 6,100 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75/17.5, color: red, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Kdodpfxjw Dqvwe Ag Asw Axle configuration Tyre size: 235/75/17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 9,900 kg Payload: 35,100 kg Gross vehicle weight: 45,000 kg Functional Loading platform height: 55 cm Extendable superstructure: Yes Condition Technical condition: very good Visual condition: very good FAYMONVILLE MEGAMAX F-S42-1ACA 2-AXLE LOWBED TRAILER SAF AXLES AIR SUSPENSION 1ST AND 2ND AXLES ARE STEERABLE LOAD CAPACITY 35.1 TONNES WABCO EBS-E LOADING PLATFORM LENGTH 610 CM + EXTENDABLE BY 250 CM PLATFORM WIDTH 254 CM PLATFORM THICKNESS 20 CM LOADING PLATFORM HEIGHT +/- 55 CM EXCAVATOR ARM WELL L=315 CM, W=75 CM, DEPTH=28 CM REAR SIDE-MARKER LIGHTS LOAD PLATFORM ANCHOR POINTS TOOLBOX RETURN ROLLER 4 X WHEEL CHOCKS

Condition: new, axle configuration: > 3 axles, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: Kingpin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Payload: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steering axles (axle 2 fixed) First two axles are liftable Drum brakes ABS SN 3020 brakes, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading deck width: 3,990 / 3,450 mm Loading deck height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional equipment: NATO plug Hydraulically foldable ramps Outriggers and planks for widening the loading platform Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear bumper with lights 2.0” kingpin Central greasing system Lashing rings Wooden loading platform Oversize load marker boards Remote control General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Kdedpfeuu E Tiox Ag Ajw Suspension: hydraulic suspension Rear axle 1: Twin tires; lift axle; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: Twin tires; lift axle; max. axle load: 12,000 kg; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axles 3–8: Twin tires; max. axle load: 12,000 kg each; steered; tyre tread all positions: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial Information Price: on request Further information Please contact Stefan Schaapveld for more details...

Condition: used, Year of construction: 2025, Weights Empty weight: 119.000 kg Functional Lifting capacity: 130.000 kg Identification Serial number: 6133.5.118 Kdodpfsv Th Rlsx Ag Ajw Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 35000 Transport dimensions (LxWxH): 15.2x3x3.21 Additional information Please contact PFEIFER GROUP for more information

Condition: new, power: 397 kW (539.77 HP), overall weight: 56,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,470 mm, loading space length: 4,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Platform Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib, plus Winch and Work Basket Kdjdpfxjw D U Iks Ag Aow ----Application · For good roads, standard operating conditions · Long-distance transport · Predominantly flat topography · Ambient temperature up to +40°C, if above +40°C max. 25 hours/year · Ambient temperature down to -25°C, if below -25°C max. 25 hours/year · Center of gravity (structure and load) approx. 0.5 - 1 m above top edge of frame · Clean roads, max. 10% dirty · Flatbed chassis without pre-installation · Gross combination weight, technical: 80 t (Observe the towing capacity of the trailer hitch!) · Special vehicles · Vehicle for crane behind the cab · Mirrors for body width of 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements · Electorhydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions per Euro 6 Stage E, with SCR, particulate filter and EGR · Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed transmission (direct-drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Tandem axles with hub reduction. 4 planet gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Scope of Delivery Includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides * Execution of all necessary chassis modifications for crane installation, disassembly and assembly of mounted parts, exhaust system, tanks etc., adjustment of the vehicle frame. All chassis and bodywork modifications are performed in compliance with the respective chassis manufacturer’s mounting guidelines and carried out to the highest quality standards. Complete assembly of a custom-designed and manufactured auxiliary subframe made of fine-grain steel, for crane and body. The welded and bolted subframe to the chassis guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique design of the subframe is a distinctive feature. Designs are executed to the highest standards and painted in the chassis RAL color. * Mounting/bolting of the crane and main stabilizer beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as a steel/welded construction, REMOVABLE FLATBED, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Flatbed structure in steel / sandblasted / painted in chassis RAL color. Removable aluminum drop sides, Suer brand, 600 mm high, anodized finish. Standard bed floor with welded 4 mm steel chequer plate, painted. 2 rows of MultiSave locking system flush-mounted and welded into the floor. 6 x Thiele lashing rings 5000 daN recessed into base frame. 8 x retractable lashing rings per side 2000 daN, flexible profile/arrangement. Stable front wall consisting of welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1300 mm, made of steel / painted in the chassis RAL color. Trimming panels, mudguards in stainless steel (WIESE design). 4x 20' container locks on the front wall (2x) in the extensio...

Condition: new, power: 397 kW (539.77 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 4,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub Kedpfx Agjwtaire Ajdw • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: used, mileage: 129,115 km, power: 235 kW (319.51 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 22,700 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 11/2027, Year of construction: 2021, Equipment: air conditioning, Internal vehicle no.: G300379 German vehicle Located at our premises in Kaufungen - Kassel, available immediately More INFO from Luis Lucena ---- 4 identical VOLVO A25G dumpers available ---- 22.7 tons Year of manufacture: 2021 From 9,500 to 10,000 operating hours From 127,847 to 140,000 km Rearview camera Financing example: * Internal number: FG53320 * Purchase price: €142,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €2,238.16 * Final installment: €28,580.00 If you are interested in this offer or would like it tailored to your needs, contact us (Mr. Enchev). We look forward to your call. Errors excepted. We gladly accept your used vehicle as trade-in. Ksdpfx Aewzqgdog Aodw Financing is possible directly through us. GOLEC Commercial Vehicles GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----