Vacuum chamber glass bell jar

VIS VGK 20

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Lodpfx Asu T N Efsdkerw The machine is in very good condition.

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Lredefyiqbepfx Adksw There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: not inspected (used), Lubot & Wakker Type: 1 pallet vacuum chamber Capacity: up to 2.000 Kg (6-8 charges) hr Completely stainless steel Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400 Lredpfx Ajfxyqrjdkjw Weight: 1200Kg Electric: 380V 3P+N+E, 7,25Kw Compressed air: 6 bar Drinking water: 3 bar aprox. 1250 ltr/hr Features: Controll cabinet vacuümpump mix-tank water preparation Storage tank with pump valves etc as-is or tested and adjusted to customer choice

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules Lrodjua D Alspfx Adkjw purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: used, Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Lsdpfsuipauox Adkjrw Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Condition: used, Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Lsdpoqt Dy Esfx Adkerw Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Year of construction: 2012, condition: excellent (used), 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz Lrodpfeiq Uv Njx Adksw - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A - incl. 1 wire shelf insert - Weight 550 kg - Documentation Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. Lrjdpfohl H Uusx Adkew - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Year of construction: 2000, condition: used, - Condition: used - Location: Bremen - Other: Lsdpfx Aehzxbajdkjrw - Manufacturer: Fryma - Type: VME-12/C - Year of manufacture: 2000 - Material product space: 1.4435 (V4A) - Product chamber: - Capacity: 22 liters - Max. Overpressure: 2,5 bar - Max. Temperature: 100° C/li> - Double jacket - Capacity: 3,3 liters - Max. Overpressure: 4 bar - Technical documentation

Year of construction: 2021, condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm Lrjdpfog Dgymex Adkew number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7