Garbage truck

Scania P320 Zoeller MediumX2 21m³ Zoeller Schüttung 1.3

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Ndedpfoydqpijx Af Seb Machine has 12 position turret and a bar loader.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Ndjdpfjnkb Ursx Af Sob Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Nedsu Agh Sspfx Af Ssdb Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, machine/vehicle number: 1, empty load weight: 8,900 kg, maximum load weight: 29,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 07/2023, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,650 mm, suspension: air, tire size: 385.65 r 22.5, color: white, Year of construction: 2016, Equipment: ABS, cooling unit, Semi-trailer, Lamberet SR2 model, year 2016, ATP certificate valid until 10.2028, 3 axles with BPW disc brakes, Lamberet isothermal van body with double internal racking, adjustable bulkhead, pneumatic rear roller shutter, aluminum floor, internal height 2.65m, side cycle racks, Carrier Vector 1550 refrigeration unit with temperature recorder and printer, diesel-electric powered, lashing points for sea transport, excellent condition, inspected until 31.07.2023 - CONCESSIONARIO INTERDRIVE SRL - PARMA. Nedpek Df Emofx Af Sodb

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Ndjdpfjv Sa I Tjx Af Sob While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Njdpfxjtu U Ebs Af Sedb

Condition: used, mileage: 362,000 km, power: 375 kW (509.86 HP), first registration: 07/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Leather interior - Hub reduction - Radio - Sun visor - Toolbox = Notes = Mercedes-Benz Arocs 3251 8x4/4 410 cm wheelbase. Full spring suspension. Palfinger PK 65002-SH E 6 x hydraulic extension. Fly jib PJ 125 C 4 x hydraulic extension. 2 x manual extension. Adjustable fifth wheel. 24V NATO plug. = Further Information = Ndodpfjy A I Axjx Af Ssb Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Front axle 2: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread left (inside): 40%; Tire tread left (outside): 40%; Tire tread right (inside): 40%; Tire tread right (outside): 40% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread left (inside): 40%; Tire tread left (outside): 40%; Tire tread right (inside): 40%; Tire tread right (outside): 40% Weights Unladen weight: 23,407 kg Payload: 8,593 kg GVW: 32,000 kg Functional Crane: Palfinger Interior Upholstery: Leather Financial Information Price: On request Identification Model number: Arocs 3251 8X4 / PALFINGER PK 65 = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Nedpfeyl Tr Njx Af Ssdb Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 6100 mm Bending capacity: 2.0 mm CNC control Adjustment of bending angle and back gauge via CNC control Roller shear Bending angle: 35° Upper die opening: 300 mm Motor power: 5.5 kW Dimensions (length x width x height): approx. 7000 x 1500 x 1850 mm Weight: approx. 6 tons Nedpfx Ajzv Er Uef Sedb Condition: Very good, almost new condition, retrofit in July 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, mileage: 163,414 km, power: 320 kW (435.08 HP), first registration: 11/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: semi-automatic, emission class: euro4, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, parking heater, Mercedes-Benz Actros 2644 - MP2 - Leaf/Leaf Suspension - 6x4 Drive Ndedpfoxttrqsx Af Sob - All-round lighting - Light bar - Air conditioning Fassi F800BXB - Jib - Winch - Radio remote control - Year of manufacture: 2007 - 4x hydraulic outriggers - Concrete counterweight Errors and prior sale excepted. Internal vehicle number: 11539