Articulated boom lift

Niftylift HR21DE HYBRIDE Hybrid, 20.8m Working Height, 13m R

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Iijdpfx Aeihf R Ujg Ieb Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) Isdog Ezarjpfx Ag Ioib -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Isdpfx Agjgyy I Ao Ioib Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: used, centre height: 140 mm; table size: 150x1050 mm; longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; Iedpfx Agjcbhl Nj Isib 2 engine speed: 1500-3000 rpm; 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C Isdpfjfc Hbdjx Ag Isib heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: used, Year of construction: 2007, pressure 315 t Iedpfevuukbjx Ag Ijib distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2005 (Multiple Options Available) Iisdpjq Hfahsfx Ag Isb Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t Iodpfx Agsvuukno Isib stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Year: 2003 Iodpfjuf Tb Uex Ag Isib Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: new, functionality: fully functional, Year of construction: 2025, warranty duration: 60 months, Effective Tube Cutting Length: 6500mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-360mm Effective Square Tube Cutting Diameter: □20*20-□254*254mm Edge Length: 20-300mm Outer Circle Diameter: ≤360mm Ijdpjg D Nziofx Ag Ijib Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability