Used Snow Plough for sale (348)

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 4,790 kg, operation weight: 4,995 kg, lifting power: 3,250 kg/m, shovel volume: 0.8 m³, digging bucket width: 1,900 mm, Year of construction: 2014, operating hours: 515 h, machine/vehicle number: 2318901, Equipment: UVV, cabin, pallet forks, standard shovel, Technical Data Standard bucket: 0.8 m^3 Lifting capacity: 3,250 kg Fedpfxey D Azro Alqogb Dumping height: 299 cm Engine power: 36.4 kW (49 hp) Dimensions: 5,130 x 1,730 x 2,500 mm (L x W x H) Weight: 5 tonnes Maximum speed: 20 km/h The wheel loader has seen minimal use and has been serviced regularly. In addition to pallet forks and standard bucket, both snow blade and salt spreader are included in the price.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, STANDARD FEATURES ? Reclining backrest ? With handle in the central aisle OPTIONAL FEATURES ? 3-point seat belt for each seat ? Adjustable center armrest with upholstery ? Fabric upholstery SEATS ? Adjustable Lineo passenger seats ? Seat color: Laura 23245105 3017/PM5006065058 ? Headrest: Valencia 107-4001 ? Mushroom base: PN5006062772 DOORS ? Door opener on the left of the dashboard ? Door 2, external opening 800 mm, single-leaf ? 4 red “Emergency” buttons BODY ? Water-repellent plywood floor edge cut-outs Paintwork & Decoration ? Enhanced corrosion protection for underbody Paint color ? RAL 9010 Exterior equipment ? Mud flaps on all axles Fodjxxw Tpspfx Alqjgb Flooring ? Sealed joints of flooring under body molding Handrails/Partitions ? Partition wall coated with cement fiberboard ? Divider pipes (epoxy coating) RAL 7004 Window blinds ? Prepared for blinds on side windows Luggage racks ? Interior parcel shelf Flooring ? FL021 Gayawood 4521 Yellowstone Radio ? Dual-zone radio AM/FM/DAB+, USB and SD card slot DIN Microphone ? 1 microphone for the driver and 1 for the hostess OPTIONAL ? 13-pin trailer socket HEADLIGHTS ? Fog lights ? Xenon warning lights with door opening assistant STOP REQUEST ? STOP REQUEST WITH LIGHT AND BELL CONNECTION WINDOWS ? All doors single glazed ? Rear window single glazed ? Windscreen with standard defroster ? All windows non-opening ? Double glazing ? Emergency shut-off switch with chain ? Driver’s window double glazed VENTILATION ? 2 manual roof hatches HEATING ? Reinforced convectors for passenger compartment ? DEL EXTRA WATER TANK FOR HEATING ? SPHEROS HEATER WITH PRE-HEATED NOZZLE AND REINFORCED WATER PUMP AIR CONDITIONING ? Air conditioning + auxiliary heating 32 kW DRIVER’S CAB ? Reversing camera ? ADDITIONAL SUN VISOR FOR LEFT EXTERIOR MIRROR DRIVER’S SEAT ? STANDARD DRIVER'S SEAT WITH INTEGRATED HEADREST – TOP SPEC ? Armrests left and right on driver’s seat DRIVER’S AREA ? Electric front curtain and manual side curtain ? Clothes hooks for driver and co-driver ? Air conditioning for the driver LUGGAGE COMPARTMENT ? Luggage compartment with door ? Heated driver’s seat DRIVER’S COCKPIT ? Digital tachograph Dtco 4.1 Smart HOSTESS ? Tiltable hostess seat ENGINE ? 2500 RPM ? Engine power 320 HP / 235 kW ? Speed limiter 100 km/h ? Diesel filter heating for Webasto ? FUEL TYPE: Diesel + HVO AUTOMATIC TRANSMISSION ? AUTOMATIC TRANSMISSION ZF 6AP1220B ? KEY PAD FOR AUTOMATIC TRANSMISSION LEFT OF DRIVER OUTSIDE THE DRIVER’S POSITION – 6 BUTTONS REAR AXLE ? REAR AXLE RATIO 5.63 SUSPENSION ? Shock absorbers ? Air suspension ? Lowering function BRAKING SYSTEM ? INTERCITY BRAKE PADS TYPE ? FAE ITALY FUEL TANK ? FUEL CAP & KEY ? Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES ? Standard on-board tool kit ? Spare wheel carrier with spare wheel WHEEL NUT COVERS / RIM COVERS ? Wheel nut covers front TIRES ? TIRES 295/80R22.5 – FAST ON ROAD/SNOW 152/148 ? X MULTIWAY 3D XZE + XDW ICE GRIP

Condition: excellent (used), functionality: fully functional, first registration: 12/2013, overall weight: 1,400 kg, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: hydrostat, suspension: steel, Year of construction: 2013, operating hours: 1,750 h, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, hydraulics, parking heater, Authorized SUBARU dealer offers for sale a professional, multifunctional municipal vehicle Kärcher MIC C 34, year 2013 – in use since 2015. This is a reliable and economical machine designed for year-round maintenance of urban areas, sidewalks, parks, and residential complexes. Thanks to its compact dimensions, 4x4 drive, and articulated frame, it delivers excellent maneuverability and high work efficiency. Additionally, this machine is offered with a robust tipping trailer included, featuring rear unloading functionality. The machine comes from its first owner in Denmark, who used it for farm transport. Therefore, no attachments are included, though we can source them upon request. The price includes a complete set of documents for registration. We offer all forms of payment: leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the vehicle away directly from our dealership. We also deliver paid vehicles—cars and trucks—directly to your chosen address anywhere in Europe. For more information about our services, please contact our sales team. Technical specifications: Brand and model: Kärcher MIC C 34 Engine: Diesel, turbocharged Fjdpoy Dtpyefx Alqegb Power: 25 kW / 34 hp Drive: 4x4 (all-wheel drive) Maximum speed: 20 km/h Gradeability: up to 25% Fuel tank: 37 l Dimensions and weight: Length: 2300 mm Width: 1090 mm Height: 1970 mm Unladen weight: approx. 1400 kg Gross vehicle weight: 1750 kg Equipment and advantages: - All-season cabin with heating and air conditioning - Hydraulic drive for attachments - Articulated steering for exceptional maneuverability - Comfortable operator’s seat - Road and warning lighting - Quick-change tool system - Low fuel consumption and cost-effective operation Applications: Ideal machine for year-round work: - Sweeping streets and sidewalks - Snow and ice removal - Spreading salt and sand - Mowing green areas - Washing surfaces and maintaining public spaces Technical condition: The machine is in good technical condition, ready for work. Regularly serviced and well maintained. Fully refurbished and preserved. The listed price is net and applies for export and companies. Significant discounts available for private customers – please contact us directly by phone to get your best price. After price negotiations, for serious buyers, we can provide detailed videos, computer diagnostics, or paint thickness measurements to facilitate safe remote purchases.

Condition: new, functionality: fully functional, empty load weight: 583 kg, maximum load weight: 2,117 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,110 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Plateau 400/2 2.7T NEW VEHICLE Internal dimensions: 406 cm x 211 cm Gross weight: 2,700 kg Payload: 2,117 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles and brakes with automatic reverse function Low-profile chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail compartment Support load Multiple tie-down lashing points along the entire length Reinforced 10" C-grade tires with steel valve M+S (mud and snow) tires 13-pin connector Front marker lights Rear lamps with reversing light, fog light, and triangular reflectors Lamps and license plate holder are foldable Winch with brake and bracket 2 x wheel chocks 15 mm thick, durable, anti-slip phenolic plywood floor OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Full LED lighting - Anti-theft device - Swap steel track for aluminum track - Swap 10" tires for 13" tires - Wheel stops - Foldable rear support cranks - Anti-sway coupling - Side railing - 30 cm aluminum side panels - 30 cm aluminum extension side panels - 150 cm high tarpaulin - Full-width wheel stop Additional accessories available on request! Plus freight to Gera and vehicle registration certificate: €250 net Images are for illustration purposes and may show optional accessories at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for pickup. Fgjdoxp U A Aopfx Alqob The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. We also have a wide range of rental trailers available. Visit us online or stop by in person!

Condition: new, mileage: 10 km, power: 110 kW (149.56 HP), fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Tow bar, removable without tools Reinforced LED cargo area lighting WORKSITE PACK Wooden load compartment floor protection (9mm, anti-slip) CITY CONNECT PACK Glazed and insulated partition wall Dual passenger seat incl. Moduwork Additional Features: Deactivatable passenger airbag, driver and passenger airbags, audio controls on steering wheel, RCE DAB audio system, electrically adjustable and heated exterior mirrors, dual passenger seat, onboard computer, Drive Assist package, rear parking sensors, increased payload, hill-start assist, 8-speed automatic transmission, rear wing doors without glazing, body type: panel van, LCD instrument cluster with pictogram display, cargo area partition, height and reach adjustable steering column, model update, 2.2 L - 110 kW diesel FAP engine, electric parking brake, Peugeot Connect Box / SOS button (emergency call for vehicle location), wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emissions according to Euro 6e standard, right sliding door, SCR system (AdBlue technology), driver’s seat height adjustable with lumbar support and armrest incl. dual bench seat (cloth), seat upholstery: Curitiba fabric, special paint Snow White / Kaolin White, 12V socket in luggage/cargo area Fedpfxjy Dncze Alqsgb Rain sensor Errors, modifications, and prior sale excepted. The equipment details stated in this advertisement do not constitute a guaranteed feature in the legal sense and are for general information purposes only. Binding equipment features are exclusively subject to the purchase contract. Sample photos

Condition: like new (used), Year of construction: 2011, The best on the market. Three-point spreader Brand (manufacturer): Kugelmann Model: Duplex Inox Year of manufacture: 2011 Color: orange Vehicle Identification Number: 21645 Standard features: · 600 liters stainless steel version · Hopper dimensions: 178x52x90 cm · Duplex for various spreading materials · Spreading width and quantity control from the cab · Cover · Weight: 350 kg Control: MCSS4 Fodpex Ti Evefx Alqsgb

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,976 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal number: 21927 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Fixed tow bar * 70 l fuel tank * Metallic paint * Technology Package 6: Exterior mirrors with integrated indicators, electrically adjustable, heated, and foldable * Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation and Blind Spot Assist incl. CTA rear emergency braking assistant, Pre-Collision Assist, camera and radar-based driver alert, Lane Keeping Assistant and Lane Change Assistant, Traffic Sign Recognition, Wrong-Way Driver Warning, Front and rear Park Pilot System, Adaptive Cruise Control with Stop&Go * 360-degree camera system * Sensico steering wheel in leather look * Wheels: All-season tires (winter-approved) R16. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" symbol, making them certified for winter use. ADDITIONAL FEATURES * 2-stage unlocking passenger compartment/cargo area * Electronic ABS with EBD * Driver's airbag * Exterior mirror housings in black-grey plastic * Battery: H7 AGM single battery * Flat roof * Roof console * Double rear wing doors (without window), 90 degrees, unlockable up to 168 degrees * Tachometer * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction Control System (TCS) * Electric front windows * Electronic parking brake * Heated windscreen * Rubber floor mats (front) * Transmission: 8-speed automatic * Grab handles (driver and passenger side) * Lockable glove box lid * Front interior lighting * Automatic climate control * Headrests (3) * Load compartment lighting (LED) * Small center console Fgodpfxjynqdne Alqob * eCall emergency call assistant for transmitting an emergency call in case of an accident or manual activation * Particle filter: Diesel particulate filter * Radio accessories: 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5J x 16 with 215/65 R16 * Gear lever on steering column * Rain sensor wipers * LED dipped beam headlights * Sliding door rear, right * Rear mud flaps * Front mud flaps * Power steering * Seat belts * Seat Package 11A – Driver's seat, 4-way manual adjustment – Dual passenger seat with through-loading hatch, fixed – Lumbar support for driver – Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Ford Power start function * Front and rear bumper partially painted in body color * Partition wall (metal) without window * Door handles in black-grey plastic * Recirculation heater * 8 tie-down points * Immobilizer * Heat-insulating glass, lightly tinted * Central locking with remote control ... and much more. ---- Single ownership. German specification. Subject to errors and prior sale. 2 years’ manufacturer warranty from initial registration (extendable upon request). We are happy to accept your vehicle as a trade-in. Financing/Leasing available even without down payment! Any questions? We are happy to advise you! As, despite existing checks, deviations of the vehicle from the above description cannot be completely ruled out, please note that this vehicle description serves only for the general identification of the vehicle and does not constitute a warranty as defined by sales law. The terms stated in the order confirmation or purchase contract alone are binding. The exact equipm

Condition: used, mileage: 14,500 km, power: 96 kW (130.52 HP), first registration: 11/2025, fuel type: diesel, overall weight: 2,400 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Cargo space package: 4 lashing eyes, cargo area lighting Fedpfx Aloyf Tamoqogb Worksite package Cargo floor and side panels made of plastic (PP) Comfort Connect package with Multiflex cabin 2 keys with 3 remote controls Further equipment: Passenger side airbag, passenger side airbag deactivatable, driver side airbag, automatic lighting follow-me-home functions (Coming Home, Leaving Home), electrically adjustable and heated exterior mirrors, exterior mirrors with black covers, on-board computer, rear parking sensors, increased payload, automatic transmission (8-speed), rear hinged doors without glazing, body/structure: panel van, head airbag system, adjustable steering column, model update, engine 1.5 liter - 96 kW diesel FAP, electric parking brake, Peugeot Connect-Box / SOS button (emergency call for vehicle location), wheelbase 2975 mm, tire pressure monitoring system, safety package, low emissions according to Euro 6e, gear shift indicator, Eco-LED headlights, right-hand sliding door, SCR system (AdBlue technology), front side airbags, black side protection moldings, seat covers/upholstery: Curitiba fabric, smartphone docking station, special paint finish snow white / kaolin white, steel wheels 7x16, start/stop system, automatic door unlocking (in the event of an accident) Errors, changes, and prior sale excepted. The equipment information provided in this advertisement does not represent a warranted characteristic in the legal sense and serves solely for general information purposes. Binding equipment features are those set out exclusively in the purchase contract.

Condition: used, mileage: 203,000 km, first registration: 06/2014, Year of construction: 2014, DB 2540 LL 6x2 Box Truck with Steering Axle • EURO 6 • Local transport - driver’s cab • Full air suspension • Automatic transmission • Automatic climate control • Stationary air conditioning • Retarder • Hill start assist • Differential lock • ASR / disconnectable • Refrigerator • Auxiliary heating • On-board computer • Multifunction steering wheel • Roof hatch • Foldable passenger seat • Telephone • Sun visor • Signal horn • Trailer hitch with jaw coupling • Duomatic pneumatic connection • Snow chains • Aluminum tank 300 liters • GVW: 26,000 kg • Curb weight: 11,125 kg • Gross combination weight: 40,000 kg (technically feasible: 44,000 kg) • Tyres: FA: 355/50 R22.5 and RA + lift axle: 315/60 R22.5 on steel rims • Tread depth: 6/5 5/5/4/7 10/9 mm BOX BODY: KOTSCHENREUTHER • Roller shutter door • 2 x triple lashing rails on both sides • Insulated • Wooden floor with recessed lashing eyes • Internal cargo space dimensions: 7,700 x 2,490 x 2,590 mm (LxWxH) - German vehicle! - 1st owner - TÜV / main inspection valid until: 05/2026 Fgedoyutz Nspfx Alqjb - Safety inspection until: 11/2026 - New on request and at extra cost! Subject to errors and prior sale! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: new, mileage: 10 km, power: 75 kW (101.97 HP), fuel type: diesel, overall weight: 2,350 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special features: - Cargo area floor and side panels made of wood - Winter package - Spare wheel with rim - Rear swing doors glazed, opening 180° - 10-inch IVI HIGH infotainment system Additional features: - Passenger airbag, passenger airbag deactivatable, driver airbag - Automatic lighting follow-me-home function (Coming Home, Leaving Home) - Exterior mirrors with black covers - On-board computer - Brake assist - Rear parking sensors - Increased payload - Rear swing doors without glazing - Isofix child seat anchor points - Body type: panel van - Comfort seat front left - Head airbag system - Adjustable steering column (steering wheel) - Model update - Engine 1.5 litre - 75 kW Diesel FAP - Multifunction seat front right Fgodpfxjy Arcie Alqsb - Electric parking brake - Peugeot Connect Box / SOS button (emergency call for vehicle localization) - Wheelbase 2975 mm - Tire pressure monitoring system - Split-folding rear bench seat 1/3-2/3 - Safety package - Low emissions according to Euro 6e standard - Gear shift indicator - Eco-LED headlights - Dual sliding doors with opening windows - SCR system (AdBlue technology) - Front side airbags - Black side protection strips - Seat covers/upholstery: Curitiba fabric - Special paintwork: Snow White / Kaolin White - Start/stop system - Automatic door unlocking (in case of accident) - Front seat heating Errors, changes, and prior sale reserved. The equipment details provided in this listing do not constitute a legally binding guarantee and serve solely for general information purposes. Binding equipment features are only those specified in the purchase contract.

Condition: used, mileage: 54,443 km, power: 81 kW (110.13 HP), first registration: 11/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M568 ---- VW T6.1 2.0 TDI Mileage: 54,443 km, fully documented service history Last inspection with oil change on: 06.02.2026 at 54,254 km All services have been carried out at manufacturer-authorized workshops. Complete digital vehicle history available. At 54,472 km (on 18.03.2026), rear brake pads and discs were replaced. ----Equipped with 8 tires: - 4 x as-new summer tires on steel rims - 4 x M+S tires (mud & snow) ----Vehicle features: * Brake Assist * Crosswind Assist * Front Assist * Cruise Control * Speed Limiter * Multi-Collision Brake * Front & Rear Parking Sensors (PDC) * Reversing Camera * Navigation System * Automatic Light Control * SOS Button * Auto-Dimming Interior Mirror * Air Conditioning * Start/Stop System * Heated Seats * Heated Windshield Fgjdpjyupzxjfx Alqjb * Cargo Area Ventilation * Fire Extinguisher * Lashing Rails ----Professional Bott Vehicle Equipment: - Shelving system with drawers and pull-out workbench - Bott Vario floor panels - 3 drawers (each 50 x 35 cm) - 5 shelves (2 shelves 120 x 35 cm; 1 shelf 100 x 35 cm; 1 shelf 205 x 25 cm; 1 shelf 85 x 30 cm) - 3 lockable toolboxes - 4 toolboxes - Pull-out bench vise ----Infotainment & Connectivity: * Bluetooth hands-free system * Apple CarPlay * Android Auto * Voice Control * 2 x USB-C * On-board computer * 2 x driver's seat armrests * Electric windows * Electrically adjustable & heated exterior mirrors * Retaining partition * 3-seater * 12V socket * Storage compartments * LED lighting in cab and cargo area ----Special Equipment: * Discover Media audio-navigation system (touchscreen, USB, streaming & internet) * Light & Visibility Package * Comfort Package Plus * On-board tools and jack * Front and rear parking assist system * Perimeter monitoring system (Front Assist) with City Emergency Braking * Reinforced suspension and damping * Vehicle without child safety locks in load/passenger compartment * Cruise control system including speed limiter * Rear tailgate with window * Heated rear window with wiper * Metallic paint * Full-height load compartment partition with fixed window * Truck registration (N1 category) * Multifunction display Plus * Tire pressure monitoring * Spare wheel with identical running gear * Reversing camera * “Transporter” badge on fender * Driver’s cab seating: front double passenger seat with lockable storage bench * Heated driver’s seat; semi-height hardboard paneling in the cargo/passenger area * Reinforced lashing rings * Winter Package ----Additional Features: * Passenger airbag switchable * Driver and passenger airbags * Traction control (ASR) * Electrically adjustable and heated exterior mirrors (convex left and right) * Rubber flooring in driver's cab * Brake Assist System (HBA) * Multi-Collision Brake * Crosswind Assist * Laminated windscreen * 2 folding remote keys * Lockable glove compartment * 2.0L - 81 kW TDI engine * Rear fog lamp * Non-smoker package * Digital radio (DAB+) * Wheelbase 3000 mm * Low emissions according to Euro 6d-TEMP * Right sliding door in load/passenger area * Electromechanical power steering * Steel rims 6.5x16 * Engine start/stop system * Seat belt warning system (driver) * Heat-

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg Fgedpfed Tbbdsx Alqsb - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Fedpfxsfdkb To Alqsgb - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction Fsdpfxsh R Taqe Alqjgb (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Fsdpfx Alomhhypjqjgb Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Fgodpfx Ajmhh Dhjlqeb - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Fgsdpfxomhh Dzs Alqjb We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Fodpfomhhx Ijx Alqjgb - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Fsdpfxomhhyao Alqegb 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Fjdpfeh Ek Dajx Alqjgb - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Fgsdpfx Aljmhh Anoqsb The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Feded Tqaljpfx Alqsgb According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm Fodpfjfdkb Uex Alqjgb - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Fgodpfxofdkbhe Alqob - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Fedpfx Asguk Dkslqsgb Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.