Other

MERCEDES-BENZ U20 Allrad Schnellwechselsystem Jotha Bj.2012

Condition: used, mileage: 29,232 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 10/2000, emission class: euro2, color: green, number of seats: 3, Year of construction: 2000, Equipment: all wheel drive, 1106. GW22W194650 Flatbed large roof hatch all-wheel drive with locks passenger double seat braked trailer load 8000KG vehicle weight (G) 4660 KG... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. Iodpfeqml Arjx Adnea We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 34,275 km, power: 110 kW (149.56 HP), first registration: 10/2000, overall weight: 8,000 kg, fuel type: diesel, color: green, gearing type: mechanical, emission class: euro2, Year of construction: 2000, number of seats: 3, Equipment: all wheel drive, Flatbed body large roof hatch All-wheel drive with differential locks Isdpfxjhyu Tqs Adnea Double passenger bench seat Permissible maximum weight: 8,000 kg Unladen vehicle weight: 4,700 kg... and much more. ----The vehicle is unprepared (in original condition)! Nationwide delivery available at an extra cost. Errors and prior sale reserved. We are happy to take your vehicle in trade. Financing / leasing possible even without down payment! Do you have any further questions? We are happy to advise you!

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Iodpfxsdf Ua Rs Adnja Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: Isdpfx Adjlqak Denoa * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Ijdpfemhhf Sjx Adnoa When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 191,013 km, power: 220 kW (299.12 HP), gearing type: semi-automatic, fuel type: diesel, color: green, overall weight: 13,800 kg, axle configuration: 2 axles, first registration: 08/2018, next inspection (TÜV): 11/2027, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, parking heater, Internal vehicle number: G200119 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English)   MB UNIMOG U430 4x4 all-wheel drive 220 kW Euro 6 Flatbed Total permissible weight 13,800 kg Empty weight 7,320 kg   Equipment (see pictures for more or send an inquiry): A1W differential lock on front axle A30 tire pressure control system A31 wheel-side, wheelbase-dependent. Parts for tire control AF2 Coupling flange, large, outer diameter 150mm FIN WDB 405110 1V 254173 VIN AO3 Synthetic oil (HA) AZ1 Axle ratio i = 6.38 B5B Trailer brake, 2-line B89 Low-pressure brake system C7H Protection device, side CA4 Mounting fittings, rear CP3 Front mounting plate DIN76060, type B, size 3 D6F Air conditioning DF3 Air-suspended suspension seat with seat heating, driver DG1 Additional steering column switch, left DH3 Bracket, universal, for control panel E33 Battery main switch on battery box E40 ABS trailer socket 24V, 7-pin / 5-pin E45 Front socket 24V, 7-pin E6Z Reversing alarm ED2 permanent power sockets 12V (C3), 12V and 24V center k. ED6 On-board socket 24V/25A in the cab, with C3 signal EL4 Generator 28 V / 150 A EV3 Power supply 24V, switchable, in the roof F5L Sun visor outside, transparent F6B Windscreen, clear, heated FT6 Mirror version, vehicle widened G20 Rear-mounted gearbox with working group G50 Gearbox oil cooler G99 Gearbox variant control GF2 Gearbox oil filter H43 Tilt cylinder H55 Hydraulic plug connection, rear, 4-way, cell 1+2 H58 Pressure line rear, 2nd hydraulic circuit H59 Separate return line rear H86 Hydraulic plug couplings ISO 7241-1 A/ISO 5675 H97 CARBOXYLIC ACID ESTER HE1 Hydraulics for tilting device HN6 age, 2-circuit, 3-cell, full prop, snow plow exhaust IB1 series equipment carrier II3 compression level (4-5) 11 UG1 300/400 medium IO0 compression level (6) 0 J1R tachograph EG, digital, with additional recording function J1S tachograph manufacturer VDO J2B CD radio, Bluetooth J48 warning light for telescopic cylinder JV2 preparation, for mobile phone/cell phone (12V) K3T AdBlue tank 25 l KC2 tank 250 l, left, aluminum L3Z headlight cleaning system L59 TRIPOD LEFT AND RIGHT FOR ROTATING BEACON L60 entry lights in the climbing area L9C preparation, for additional headlights, on the roof LA3 bi-xenon headlights, LED daytime running lights M2D engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm M5M engine version Euro VI, with OBD-C M5V High Performance Engine Brake MG47 GENERATOR 28V - 150A MJ93 MDEG 13 MJB9 SOFTWARE VERSION M 9.11.00.03 MK51 INJECTOR OC3 MLB5 POWER 220 KW (299 hp) 1200 NM MYB8 CONTROL CODE STEERING PUMP MYC1 CONTROL CODE LLR HOT RELOCATION N00 POSSIBLE FITTING MOTOR PTO DRIVE P60 PLATFORM FRAME FOR THIRD-PARTY BODIES Q94 New Generation Ringfeder AHK QA1 Increased trailer load, ZAA max. 20t R42 4 DISC WHEELS 14 X 22.5 S8A First aid kit SV2 Warning triangle and warning light TQ6 Weight variant 13.8 t (6.8/7.8) UARF Tire pressure control system (for R42) UFZV Locking system, central locking, radio remote control VB7 Equipment carrier BlueTec 6 VH2 Identification of tractor unit registration in Germany X4H Instrument/signs/printed materials in German XG3 Extended warranty for the 2nd + 3rd year (SN) Y42 HYDRAULIC JACK 10 T Ijdpsun E Tpofx Adnea Z01 Vehicle with left-hand drive Z5Y Vehicle, for

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Isdjmhhypspfx Adnea

Condition: ready for operation (used), Other processing machines Becker vacuum and blowing air pump D 80 B4 Iodpeh S N Haofx Adnoa

Condition: used, diameter div. Iedjwpw Evopfx Adnoa number 80x tool adaptor SK 40

Condition: good (used), Tap 1 3/8 GG 115 mm long Iedpfx Ajdx Uzaodnoa