Telescopic Boom

Manitou 260 TJ+ ST5

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Dkodpfev Taiaex Ac Nsh Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Dodpfx Aouwlzysc Nekh Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge Dkjdpfegg N Hbjx Ac Noh - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC Dkodpfxsnh R Eko Ac Nsh - Service contracts, maintenance at your site

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg Dkjdpfxjkh Niqo Ac Njh

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: Dkodpfxoh Etf Ro Ac Noh -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted upright on the front of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center Dsdpfxsi Ai E Ro Ac Nekh -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. Dksdop Dufzjpfx Ac Noh The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch Dodpfevmmrusx Ac Nskh - cutting line lighting

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec Dodpfx Asxab Erec Nokh return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)