Mini crane

Winlet 350 SOLD

Condition: new, Year of construction: 2025, Technical specifications: • Extraction capacity ~ 5200 m3/h Nwsdjd H Rf Tspfx Ah Heb • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)

Condition: new, Year of construction: 2025, functionality: fully functional, Industrial Band Saw – Power, Precision, and Reliability in Every Cut – HEAVY DUTY MACHINES Equipped with a powerful electric motor of 30, 37, 45, or 55 kW, this band saw delivers outstanding performance, allowing for cutting capacity of up to 35 m³ of logs per 8-hour shift. With a maximum log diameter of Ø1150 mm, it easily handles even the most demanding timber. Key Advantages: Nwsdpewfqqdofx Ah Heb • High Precision – Perfectly straight cuts with minimal deviations. • Power and Efficiency – High motor output ensures fast and efficient cutting. • Robust Construction – Built to withstand the toughest working conditions. • Easy Operation – Intuitive control system for quick adjustment of all parameters. • Safety Systems – Integrated safety mechanisms for secure operation. Whether you're in the wood industry, a sawmill, or a large-scale workshop, this saw is the ideal solution for high-productivity and precise cutting of large logs. High degree of automation with Siemens / Scheider PLC and Wravor FastSmartCut program, always with option with manual control.

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Njdpfx Ajiy Dw Hoh Hewb Please feel free to contact us at any time.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Nedpfxemhhf Ss Ah Howb - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) Nwodpfx Ajmhhypeh Heb - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Year of construction: 2001, condition: excellent (used), machine/vehicle number: RES J-BO, ABUS HB crane canopy Crane runway with dimensions approx. 10x5m (5m bridge) This crane is available several times in different lengths. Example pictures ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of ABUS HB200 rails System is supplied complete: HB rails, rail connectors, trolleys, end plates, brackets/hangers etc. incl. 500KG Abus chain hoist - lifting height approx. 4m Nwjdpfxju I Uwxs Ah Hob Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Nwjdpfeihvtgox Ah Hob

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Nwsdpfxjmhh Dhe Ah Hsb We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2007, condition: good (used), SCHÜCO ISOMAT 5 polyamide joining machine on aluminum profiles Semi-new with tooling for different profiles Currently disassembled for transport Nsdpfstq E Eisx Ah Hjwb The profile taping machine can be used to apply a protective tape on all profiles with two parallel surfaces. It is also possible to apply the tape on a third side, at right angles to the other two, in a single operation.

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Low energy consumption, high suction power IE3 motor, energy efficient Automatic filter bag cleaning Nwedsxzt Stopfx Ah Hjb