Scissor lift

Liftlux SL172-18E2WD Elektro

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Hedpodrtalofx Amyor a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Hodorakqmepfx Amyor Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 Hsdpfx Amjymy Imsyer TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Hjdpjyak Anefx Amyjr Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Hedpfx Ajua Eu Nomyor

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: K1232, overall weight: 5,100 kg, load capacity: 15,000 kg, High-quality double-girder bridge crane by STOCKER with a load capacity of 15,000 kg (15 t). Heavy-duty design featuring two massive box girders, an electric trolley (top-running trolley) with wire rope hoist, and a twin hoist system (yellow load hook visible). Suitable for mechanical engineering, steel construction, foundries, heavy assembly, and heavy-duty warehousing. Load capacity: 15,000 kg / 15 t Manufacturer: STOCKER Design: Double-girder bridge crane (top-running trolley) Drive: fully electric (hoisting, trolley, and crane travel) Power supply: conductor rail / festoon cable Condition: used, serviced, fully functional Hsdpfx Amey H R Irsyor Span, overall height, lifting height, and runway length available on request. Dismantling by specialist company required – on request, we can organize a quote.

Condition: good (used), Year of construction: 2010, operating hours: 284 h, fuel type: electric, color: other, Year of manufacture: 2010 Drive: Wheel GVW: 4.830 kg Dimensions (LxBxH): 321 x 174 x 239 cm Working height: 1.250 cm Holland Lift X-105EL18 Building year: 2010 Hedpfowp N Atsx Amyor Working hours: 284 h Working height: 13.5 mtr Platform height: 12.5 mtr Weight: 4830 kg Dimensions (L x W x H): 3.21 x 1.74 mtr Platform capacity: 500 kg Drive: 4x2 CE certified Price is excluded VAT Machine from our rentalfleet. (still in rental) For more pictures and productvideo look at our website Good working condition

Condition: used, Stick electrodes 2.5 x 250 Hodpfod Iy Ncox Amyor -Type: FOX DMO Ti -Price: per package -Number: 2 packages available -Weight per package: 3.3 kg

Condition: used, Year of construction: 2006, operating hours: 128 h, 2006 | Holland-Lift N165-12EL Combistar (16.5 m) | Used Scissor Lift | 128 hours Hodjyb Ui Uspfx Amysr 📍Location: Lithuania 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 28 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Given the age of the machine, all components and functions are operating as expected, with no major issues or abnormalities observed during the inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38101 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Used machine Hedpfxed Ecuvj Amyer Folding unit NB425 Manufacturer: Knapp Year of manufacture: 2008 Condition: very good 4 belts Belt length: 450 mm Belt width: 30 mm We have 4 units in stock. Dimensions of the transfer unit: Width: 550 mm Depth: 760 mm Height: 330 mm