Tracked dumper with front loader GP500

Kingway GP500

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Iedpev Si Szefx Aa Esaw Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm Iaedpjwzzivsfx Aa Ejw - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: new, Year of construction: 2024, Field of application: Mining Empty weight: 180 kg Carrying capacity: 500 kg Iodpjyawibefx Aa Ejaw GVW: 680 kg

Condition: used, mileage: 600,000 km, power: 353 kW (479.95 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: gold, gearing type: mechanical, emission class: euro6, loading space length: 5,400 mm, loading space width: 2,450 mm, loading space height: 500 mm, Equipment: air conditioning, all wheel drive, * MAN TGS 18.480 3-way cable roll-off tipper * First registration: 2016 * 600,000 km * Euro 6 * Manual gearbox * Leaf/air suspension * 4 x 4 HAD (HydroDrive) * Automatic air conditioning * Trailer coupling * Extendable bumper * Construction machinery container: 5.4 x 2.45 x 0.50 m * Bodywork: HMF TP320 with remote control for 6 m container * Wheelbase: 4.20 m * Unladen weight: 9,810 kg Iajdpfxeyq A Iwe Aa Esw * Payload: 8,190 kg * Permissible gross combination weight: 44,000 kg

Condition: used, Year of construction: 2007, Aichi rm04b Bj 2007 / 2009/2010/2011 Weight 630kg LxWxH 78x 130 Fits through a door Equipped with CE+ approval and built-in charger Iodpfx Aexcgatja Eoaw Ready to use and super powerful

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 SCHORR tracked dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - 500 kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAS is its hydraulically controlled bucket. With the help of the so-called "self-loader," you no longer need a separate shovel. Iasdpfx Aajwh I Sdo Ejw Thanks to its slim design (740 mm), the mini dumper can even drive through narrow paths and narrow doorways. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dumper/box is effortless and requires little effort thanks to the hydraulic tipping drive, even when fully loaded. Another advantage of the wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a robust dumper made of thick sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without you having to manually assist. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer's type designation: RR500 - Model: DHKAS - Load capacity: 500 kg - Tilt drive: Hydraulic (infinitely variable) - Drive: Chain - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Power: 9.2 hp - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward gear: max. 8 km/h - Reverse gear: max. 5 km/h Basic dimensions: - Total length of platform folded: 2350 mm - Total length of platform unfolded: 2550 mm - Total width (including bucket): 740 mm - Total height: 1050 mm - Container dimensions (internal dimensions): 740 x 665 x 435mm - Container dimensions (external dimensions): 1060 x 710 x 520mm - Track width: 710mm - Loading volume (liquid): ~ 200L - Loading volume (heaped): up to 370L (depending on load) - Drive chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH BUCKET The mini dumper relieves you of the arduous burden of having to move heavy wheelbarrows by hand. The attached, hydraulically controlled bucket also helps with this. SMOOTH-RUNNING AND ROBUST The mini dumper features a robust 6-speed transmission with two reverse gears. The dumper also features four eyelets for secure attachment during transport. We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm Iajdsvyhczjpfx Aa Eow – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Iaodpfx Aasynltqo Eow

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. The KINGWAY YSRT14 model is a modern, compact rubber-tracked mini loader with skid-steer steering, designed for efficient operation in challenging terrain conditions and confined spaces. Thanks to its compact design and high maneuverability, the YSRT14 is ideal for construction, landscaping, and municipal applications. The KINGWAY YSRT14 is the right choice for professional users seeking a reliable, robust, and economical machine that combines functionality, durability, and low operating costs. KINGWAY YSRT14 – Compact Loader / Mini Loader – Year of Manufacture: 2025 Technical Data: Model: YSRT14 Operating weight: 680 kg Bucket capacity: 0.06 m³ Travel speed: 0–4 km/h Maximum lifting capacity: 220 kg Maximum working height: 2,490 mm Maximum pin height: 1,935 mm Maximum dumping height: 1,564 mm Reach at maximum dumping height: 650 mm Wheelbase: 860 mm Ground clearance: 220 mm Dump angle: 21° Bucket width: 998 mm Overall length: 2,166 mm Overall width: 920 mm Body width: 826 mm Overall height: 1,383 mm Turning radius: 1,500 mm Engine: Manufacturer: RATO Model: R420D Power output: 8.6 kW Max. RPM: 3,600 rpm Cooling: Air-cooled Iedpfxjyk Eh Ho Aa Esaw Engine oil capacity: 1.1 l Fuel type: Petrol Rubber tracks: 150 × 72 × 36 Tanks: Fuel tank: 6.6 l Hydraulic oil tank: 26 l Price: Net: 4,400 EUR Gross: 5,236 EUR Advantages & Warranty: 12-month warranty Spare parts and service always available Brand new, year of manufacture 2025 Delivery available

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors Iodpfoxq Rgysx Aa Ejaw - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic