Crane

JMG MC 22500RE

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Itsdpfxjw Eqdks Ahvjd Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Itsdpfx Aod Szf Nehvjd Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: new, functionality: fully functional, mileage: 5 km, fuel type: diesel, color: green, overall weight: 5,500 kg, empty load weight: 5,500 kg, Year of construction: 2025, operating hours: 5 h, Equipment: additional headlights, air conditioning, cabin, hydraulics, low noise, onboard computer, rear pickup, rubber tracks, I am offering a brand new Zoomlion ZE55GU crawler excavator with an operating weight of 5.5 tons. The machine is available immediately and is ideal for earthworks, roadworks, landscaping, and construction applications. - Year of manufacture: 2025 - Powerful and fuel-efficient Kubota V2607 engine, compliant with emission standards Ijdpfxexwd Hao Ahvetd - Operator cabin fitted with air conditioning, ergonomic seat, panoramic visibility, and rearview camera - Variable displacement piston pumps with swashplate; Maximum flow: 154.8 l/min - Digging depth: over 3.8 m - Quick coupler included - Buckets available separately—select exactly the type you need - Hydraulic breaker installation possible - Highly maneuverable, efficient, and work-ready machine - Manufacturer’s warranty. VAT invoice can be issued - Machine available immediately—collection in Kolbudy or nationwide delivery possible - Assistance with organization of sea transport from any European port - Additional attachments available separately—a wide range of accessories to tailor the machine to specific tasks Financing options: We offer leasing or credit purchase options. We assist in selecting the most advantageous option and handling all formalities. We cooperate with renowned financial institutions: Deutsche Leasing S.A./ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o./ PKO Leasing S.A./ PEAC Poland Sp. z o.o./ Nest Lease S.A./ Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures up to 1 million PLN - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write. I am happy to provide additional information and advise on attachments. This advertisement does not constitute a commercial offer as defined by Art. 66 §1 of the Polish Civil Code.

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Itodpfepl D Hxsx Ahvsd Tyop GA 250

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum Iodpjw S Ii Nofx Ahvjtd - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length: Isdpfswp Eblox Ahvotd

Year of construction: 2002, condition: used, pressure 63 t Isdpfx Ajlp U D Tehvotd throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t Iedefg Rlcepfx Ahvjtd dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: used, EWAG WS 11 SP is a tool and cutter grinder designed for precision, high accuracy and reliability. Working capacities: X/Y/Z axes 100 mm, grinding-wheel diameter 75 mm, workpiece spindle speed 100-1300 t/min, vertical adjustment of grinding head 100 mm, slewing range horizontal 165°, grinding spindle speeds 2500-7100 t/min, collet attachment 20 W. Technical specifications: voltage 50 Hz 3x380 V, total power required 2 kVA, machine weight about 400 kg, dimensions L850×W850×H1580 mm. Key equipment: flange for wheel, dust extraction, set of grinding wheels, lamp, helical grinding device W20, feed unit (Z-axis) 4 E-M, grinding stroke 3 J. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical Ijdpfx Ahsxyi I Isvstd

Condition: reconditioned (used), Year of construction: 2005, operating hours: 6,000 h, functionality: fully functional, saw blade diameter: 810 mm, grinding wheel diameter: 125 mm, CHP250 is an automatic machine for grinding the complete tooth geometry of carbide-tipped circular saw blades. Version with two CNC axes and a full enclosure. Technical specifications: Circular saws Outer diameter: 80 to 810 mm Bore diameter: 10 to 220 mm Blade thickness: up to 8 mm Tooth pitch: 6 to 120 mm Iodpjykmxtsfx Ahvotd Rake angle: -30° to +50° Clearance angle: 5° to 45° Tooth height difference: up to 3 mm Back rake bevel: up to 45° Face bevel: up to 15° Grinding path: up to 20 mm Grinding wheel diameter: 125 mm CHP250 On the CHP250, two CNC axes control the bevel grinding and the infeed of the grinding wheel. This is a prerequisite for grinding any tooth geometry on the front (face) or back (flank) of the tooth in a single pass. Central lubrication and exhaust system are included. For effective coolant (oil or emulsion) cleaning, a Seitz-brand band filter system from 2010 is included. Up to 3 machines can be connected to the unit. The base is made of stainless steel. The condition is very good.